The compact central control unit MV5 ZE 101 XL is tailored to the most important features of the automation and it convinces through the small-sized housing. The compact central control unit is equipped with operating components such as power supplies for stepper motor drives, a real-time clock, memory modules and standard fonts. The IP54 protected central control unit is also equipped with integrated PC functions for independent applications. DEVICENET-/ PROFIBUS- or PROFINET-cards (also LWL) can be used. This central control unit is equipped with a high resolution LC-display (640 x 480 pixels) and a capacitive keyboard. The display facilitates the installation, the adjustment and the diagnosis of the central control unit enormously. The software of the central control unit can be operated directly via the display and texts can be inserted via a keyboard shown on the touch screen. Frequently needed keys are installed on the right side of the LC-display. The coloured icons of the software make the navigation very easy. Due to the big, internal memory storage of the central control unit, several hundred marking files, logos and fonts can be saved directly on the unit. 4.+ 5. Slots for digital I/O-cards / bus-cards / external power supply 6. Marking head connection Phone number (800) 255-6046 │ www.RocklinMFG.com

Technical Data Marking area (x/y): 50 x 25 mm (MV5 U50/25) 80 x 25 mm (MV5 U80/25) 120 x 25 mm (MV5 U120/25) (optional y-movement of 45 mm) A solid carbide pin oscillates by pneumatic means while it is moving by two carriages in the x and y direction. It strikes the material by an up and down movement Depending on the impact frequency the marking either becomes a continuous line or a single dot marking Compact design of the marking head Weight-optimized construction Maintenance free machanics and tools Highest marking quality Consistent modular design concept Can be used in any position Available...