7.2 Trapoflex working platforms for safe material transport on sites
12Pages

STORING AND INSTALLATION AT CONSTRUCTION SITES 7.2. TRAPOFLEX WORKING PLATFORMS for safe material transport on sites

TRAPOFLEX WORKING PLATFORMS GENERAL INFORMATION Your benefits at a glance: G Safe working area outside a building for transporting formwork and scaffolding material up and down using a crane WITHOUT angled hoisting equipment Rapid assembly; safe, quick implementation Loads permitted up to 4.7 t, point loads up to 0.6 t Effective protection against small parts falling down thanks to a closed floor area made from chequer plate; closed off additionally at the sides’ circumference No height difference between the upper edge of the platform floor and the concrete floor Side protection frame and...

TRAPOFLEX WORKING PLATFORMS MOUNTING Mounting within the system – quick and easy ready to use suspension lugs for transportation by crane props fixed to a swivelling plate side protection frames, have to be inserted into the prepared borings before lifting with the crane Secure pipe linchpin (see detailed drawing) For a maximum security during the use on the site it has been taken care that all the load bearing components are connected stable together. Thus incorrect use and sliding away of parts are excluded while the critical moving of the platform. All the necessary components are...

TRAPOFLEX WORKING PLATFORMS DELIVERY AND MOUNTING Devilery and mounting with pictures Transport to the site by crane All relevant parts are already pre-assembled Easy delivery to the place of use The aluminium props are simply folded up and fixed work platform is clearly visible Ready to use in just a few steps TrapoFlex working platforms

TRAPOFLEX WORKING PLATFORMS COMPONENTS All components in survey: The TrapoFlex platforms cosist of few standard component parts, which can be combined together in different configurations. In this way 4 standard platform sizes can be realized within the system. Each platform can be optimized to all kind of requirements on the sites. Cantilever girder L = 6.00 m for type S / M / L L = 7.50 m for type XL Flooring frame L = 3.00 m, B = 0.80 m Traverse L = 2.40 m for types S / M Girders for front end L = 2.40 m for types S / M L = 3.00 m for types L / XL Side protection frame Prop – length and...

TRAPOFLEX WORKING PLATFORMS SPECIAL SOLUTIONS TrapoFlex Typ L in special version for erecting into a narrow opening in the wall. The platforms are mounted on 2 cantilever girders in a adequate distance. The trapoflex-platform is supported on a tower consisting of aluminium heavy-duty props. Execution in other standard sizes possible! TrapoFlex Type M in special version to bridge a parapet. There is a continuous area made of platform elements supported on a tower consisting of aluminium heavy-duty props. Execution in other standard sizes possible! TrapoFlex working platforms

TRAPOFLEX WORKING PLATFORMS SURVEY ABOUT STANDARD-SIZES TECHNICAL DATA: TrapoFlex Type “S“, complete Platform area A [m2] Permissible area load [kN/m2] Permissible point load [kN] Weight [kg/unit] TrapoFlex Type “M“, complete Platform area A [m2] Permissible area load [kN/m2] Permissible point load [kN] Weight [kg/unit] Products subject to technical chang

TRAPOFLEX WORKING PLATFORMS SURVEY ABOUT STANDARD-SIZES TECHNICAL DATA: TrapoFlex Type “L“, complete Platform area [m2] Permissible area load [kN/m2] Permissible point load [kN] Weight [kg/unit] platform area TrapoFlex Type “XL“, complete Platform area [m2] Permissible area load [kN/m2] Permissible point load [kN] Weight [kg/unit] platform area TrapoFlex working plat

TRAPOFLEX WORKING PLATFORMS SINGLE PARTS AND ACCESSORIES TECHNICAL DATA: Cantilever girder For type Weight [kg/unit] Example: anchoring with tie rod and wing nut NEW version canilever girder, available from now on: When the standard supporting with the foldable aluminium prop upwards is not possible, we offer now the possibility to hold down the end of the cantilever girder by anchoring to the slab underneath. The anchoring must be determined and adapted to the special conditions of each mounting situation. We recommend to anchor through the slab and to use a load-distributing girder...

TRAPOFLEX WORKING PLATFORMS SINGLE PARTS AND ACCESSORIES TECHNICAL DATA: Weight [kg/unit] Side protection frame Weight [kg/unit] Pipe linchpin for securing side protection frame Weight [kg/100 units] Survey: Room height and necessary supporting Type of prop / combination of elements Clear room height [m] 3-AL 3-AL + extension element 1m 3-AL + additional spindle 4-AL 4-AL + additional spindle 4-AL + extension element 1m 5-AL 5-AL + additional spindle Single props with 1 spindle Extensionlength L [m] Length L 1 Weight [m] [kg/unit] Additional spindle with protection against unscrewing Type...

TRAPOFLEX WORKING PLATFORMS SURVEY TECHNICAL DATA TrapoFlex Platform area Permissible load Permissible area load Permissible point load Max. Vertical loadFst per beam Note: The specified permissible loads and the support forces are real characteristic values. *External dimensions including canitlever beam and beam for the front Caution: overhead ceiling investigarte for upward force FD clear room height Survey Support forces and selection of pressure supports Caution: support of the edge of slab delivered from site P Products subject to technical changes

Berlin office: Date of issue: January 2020