5.3. ANGLE CONE and accessories

Product catalog summary

Angle Cone and Accessories Overview

General Information:
The angle cone is designed for formwork construction, allowing for an infinitely variable anchoring angle adjustable between 45° and 90°. It is available in two diameters: D&W 15 mm (blue) and D&W 20 mm (yellow). The design simplifies assembly, saving time and money, and the cone base can be easily removed with a specialized tool. After removal, a circular opening remains, which can be closed with fine cone concrete, resulting in a homogeneous facing concrete surface.

Benefits:
The angle cone addresses common issues in formwork construction, such as problems with haunched or non-parallel surfaces. It eliminates the need for time-consuming improvisation and prevents unpleasant concrete surfaces caused by standard cones. The two-part design, consisting of a recoverable basic cone and a non-recoverable swingable headpiece, provides a reliable solution for exposed concrete.

Installation and Removal Procedure:
1. Fix the basic cone to the wooden shuttering with nails.
2. Align the headpiece using a spacer tube or coupling nut.
3. After shuttering removal, use the removal tool to extract the basic cone.
4. Close the remaining circular cutout with a refined-concrete cone for a perfect exposed concrete surface.

Technical Data:
Angle-cone D&W 15 mm:
- Complete angle-cone: 5.55 kg/100 units
- Basic cone: 3.35 kg/100 units
- Headpiece: 2.20 kg/100 units
Angle-cone D&W 20 mm:
- Complete angle-cone: 5.55 kg/100 units
- Basic cone: 3.35 kg/100 units
- Headpiece: 2.20 kg/100 units

Accessories:
- Removing-tool: 1.08 kg/unit
- Fine grained concrete cone: 0.14 kg/unit
- 2-component glue: 2 x 1.0 kg/unit

Contact Information:
ROBUSTA-GAUKEL GMBH & CO. KG
Headquarter: Brunnenstraße 36, D-71263 Weil der Stadt-Hausen
Phone: +49 7033 53710
Berlin Office: Rohdestraße 19, D-12099 Berlin (Tempelhof)
Phone: +49 30 75707000
Website: www.robusta-gaukel.com
Email: [email protected]

Catalog excerpts

ACCESSORIES FOR FORMWORK CONSTRUCTION 5 5.3. ANGLE CONE and accessories

Open the catalog to page 1

ANGLE CONE AND ACCESSORIES GENERAL INFORMATION Your benefits at a glance: G Infinitely variable anchoring angle can be adjusted between 45° and 90° 2 diameters available – D&W 15 mm (blue colour, in future rec colour), D&W 20 mm (yellow) Savings on time and money thanks to its simple assembly – no need for time-consuming solutions at a construction site The cone base can be easily removed with our removal tool A circular opening always remains once the cone base has been removed Opening can be easily closed off with fine cone concrete Homogeneous facing concrete surface Often during formwork...

Open the catalog to page 2

ANGLE CONE AND ACCESSORIES GENERAL INFORMATION The basic cone will be fixed to the wooden shuttering with 4 nails. Fitted marks at the circuit in a 15°-raster will ease the alignment around the longitudial spindle in an angle righteous way After removing the shuttering the removingtool will be put on to the basic cone. The oval-shaped peg grasps into the provided opening. After the removing there will remain a cirular cutout. With the spacer tube Ø 22 / 26 the headpiece will be put up in the requested angle. By swivelling through 90 ° the oval-shaped peg grips into the cone. Because of the all-around...

Open the catalog to page 3

ANGLE CONE AND ACCESSORIES GENERAL INFORMATION Parts angle-cone, complete, 2-part basic cone, recoverable headpiece, non-recoverable angle-cone, complete, 2-part basic cone, recoverable headpiece, non-recoverable Removing-tool Weight [kg/unit] Fine grained concrete cone fitting for all recoverable clamping-flanges Weight [kg/unit] 2-component-glue to glue in fine grained concrete cone Weight [kg/unit] Angle Cone and accessories

Open the catalog to page 4