Catalog excerpts
3.3. RAILING SUPPORTS and accessories
Open the catalog to page 1RAILING SUPPORTS AND ACCESSORIES GENERAL INFORMATION INDEX General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Railing posts with installation parts Usage: before concreting inserted railing post and accessories . . . . . . . . . . . . . . . . . . . . . . . . 4 – screwing part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 – adapter for sheet pilings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 – accessories for stairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Open the catalog to page 2RAILING SUPPORTS AND ACCESSORIES GENERAL INFORMATION Your benefits at a glance: G For creating a secure barrier to be able to work in safety near open floor edges G All railing posts and accessories galvanised for a long service life G Post intervals max. 2.00 m with side protection boards 15 x 3 cm G Closed stirrup to prevent the side protection boards from being lifted out G Especially robust stirrups as regards bending; net inner dimensions = 65 x 165 mm for two overlapping side protection boards G All stirrups with drill holes to nail and secure the side protection boards G Multiple...
Open the catalog to page 3RAILING SUPPORTS AND ACCESSORIES INSERTED RAILING POST AND ACCESSORIES Inserted railing post G Universal usage at slabs with concreted plastic tube G Usage at steel constructions with welded steel tube sleeve G Usage at slab edges, also at overhanging slab edges with slab stopend console and slab stopend bar as accessory G Usage at stair stringers with additional parts This railing post is intended for insertion into the concreted installation kits. Slab thickness: minimum 30 cm – length of insertion base: 25 cm – length of installation-kit: 27 cm Also fitting into all usual borings with a...
Open the catalog to page 4RAILING SUPPORTS AND ACCESSORIES INSERTED RAILING POST AND ACCESSORIES TECHNICAL DATA: Inserted railing post Weight [kg/unit] 1255 packing unit per stacking pallet: 100 units stacking pallet for storing and transport see page 25. for inserted railing post with vertical positioner for inserted railing post 1 plastic tube (item no. 250401) 2 plactic cap (item no. 250410) 1 plastic tube (item no. 250401 – L= 170 mm: 250402) 2 plastic cap (item no. 250410) 3 vertical positioner (item no. 250403) All parts of the installation-kit are also available separately All parts of the installation-kit...
Open the catalog to page 5RAILING SUPPORTS AND ACCESSORIES INSERTED RAILING POST AND ACCESSORIES Accessory: foot socket The foot socket can be screwed onto already existing base plates, prefab elements or edge settings. It accomplishes our ROBUSTA-railing-post system and allows the subsequent securing of danger areas in new constructions or reorganizations. Elevator shafts, slab edges, gap between two flight of stairs and balconies with railing posts, also ROBUSTA mesh barriers, can be secured quickly without problem. Accessory: adapter for sheet pilings The well thought-out technical construction of the adapter for...
Open the catalog to page 6RAILING SUPPORTS AND ACCESSORIES INSERTED RAILING POST AND ACCESSORIES for inserted railing post, flexible height Weight [kg/unit] Please advise needed height when placing your order Foot socket for inserted railing post Weight [kg/unit] Adapter for sheet pilings for inserted railing post clamping range from 5 to 25 mm Attachment 1 Weight [kg/unit] 2.0 Attachment 2 Weight [kg/unit] 1.8 Products subject to technical changes
Open the catalog to page 7RAILING SUPPORTS AND ACCESSORIES INSERTED RAILING POST AND ACCESSORIES Accessory: slab stop end bar The slab stop end bar is used as holding of the side formwork as well as security fences. The cutting and boring of square timbers with distance boards is not necessary any more. Due to 5 cm holding-rail offset, a correct placement of the shuttering board is automatically guaranteed. It is just placed and secured with nails through the borings from the back. By means of the inserted railing holder, it takes no much effort and only a short time to mount a security fence. Accessory: slab stop...
Open the catalog to page 8RAILING SUPPORTS AND ACCESSORIES INSERTED RAILING POST AND ACCESSORIES TECHNICAL DATA: Slab stop end bar Weight [kg/unit] fixing parts see on pages 10 and 11 Slab stop end console max. anchor tensile force = 5 kN Weight [kg/unit] fixing parts see on pages 10 and 11 max. anchor tensile force = 6.5 kN
Open the catalog to page 9RAILING SUPPORTS AND ACCESSORIES INSERTED RAILING POST AND ACCESSORIES Overview of fixing parts before and after concreting 0 0 12 17 Installation-kit with non-recoverable clamping flange Impact dowel Impact dowel Installation-kit with non-recoverable clamping flange Slab stop end bar Attachment 2 Slab stop end console Screw-in set with wing nut screw-in set with wing nut Fixing parts after concreting Screw- in set D&W 15 mm, Weight [kg/unit] accessories and dowel mounting see pages 25 and 27. *other lengths available on request Fixing parts before concreting 16 Installation-kit D&W 15 mm...
Open the catalog to page 10RAILING SUPPORTS AND ACCESSORIES INSERTED RAILING POST AND ACCESSORIES Fixing parts before concreting For high-exposed concrete: with recoverable clamping flange and fine grained concrete cones 16 (please order clamping flange separately) Installatin-kit consisting of 1 threaded sleeve (item no. 1015..* – V2 A: item no. 1016..*) 2 threaded plate (item no. 101591) 3 plastic cap yellow (item no. 101593) *the last two numbers indicate the length of threaded sleeve. All parts of the installation-kit are also available separately. Clamping flange D&W 15 mm for wooden shuttering, recoverable...
Open the catalog to page 11RAILING SUPPORTS AND ACCESSORIES INSERTED RAILING POST AND ACCESSORIES Accessory: Vario slab stopend bar slap stopend b) subsequently bored through-hole non-recoverable close nut from above Fixing: a) threaded sleeves embedded in concrete: 2 additional rods Ø 10 mm L = 50 cm with 2 cm distance both on the left and right near the sleeve slap stopend The Vario is especially ideal for use in security fences and stopend formwork for lattice girder floors. It consists of a clamping part with a revolving supporting arm with the possibility to fix the inserted railing post. The angle of...
Open the catalog to page 12All ROBUSTA-GAUKEL GmbH & Co. KG catalogs and technical brochures
-
7.1 Depoflex storage racks
16 Pages
-
6.2 Heavy-duty aluminium props
20 Pages
-
6.1 Push-pull props
24 Pages
-
5.4 Rapid locking nut
8 Pages
-
5.2 Anchor tie bars
20 Pages
-
5.1 Profile ledges
8 Pages
-
4.1 Round column formwork
12 Pages
-
3.6 Multi walkway
8 Pages
-
3.4 Safety barrier
28 Pages
-
3.1 Foldable working platforms
32 Pages
-
2.1 Non-recoverable formwork
12 Pages