Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Robson Technologies, Inc.
  3. TEMPERATURE CONTROLLER

TEMPERATURE CONTROLLER

TEMPERATURE CONTROLLER
1 / 1 PageView full catalog

TEMPERATURE CONTROLLER

Product catalog summary
Product Overview: The S6-02 Temperature Controller by Robson Technologies, Inc. is designed for use with RTI's test fixtures, particularly for liquid crystal FA testing. It features digital displays for both set and measured temperatures, with a thermistor sensor located in the test fixture.
Specifications: The controller operates on a line voltage of 115/230 VAC +/-10% at 50/60Hz, adjustable via the back panel. It offers output voltages of 28VAC on high setting and 14VAC on low setting. The temperature range is set to a maximum of 180°C, with a recommended maximum of 135°C for test fixtures.
Components and Controls: The device includes fuses for both legs of line input, electronics for temperature control, and the 28/14VAC output. It is equipped with switches for Heat ON/OFF and HIGH HEAT/LOW HEAT, as well as controls for adjusting the set temperature up or down.
Important Considerations: The temperature is measured at the heater block, not the package, meaning the actual die temperature may vary from the measured temperature.
See more

Catalog excerpts

TEMPERATURE CONTROLLER-1

RTI PRODUCT SOLUTIONS TEMPERATURE CONTROLLER PRODUCT FEATURES: PRODUCT FEATURES: Line Voltage: 115/230 VAC+/-10% 50/60Hz (set on back panel) Output Voltage: High setting: 28VAC, Low setting: 14VAC Temperature Range: Set to 180 C max. (Max recommended for test fixtures is 135 C. Controller: Digital displays for both the set temperature and measured temperature Temperature Sensor: Thermistor (located in test fixture) +/- 5% Fuses: Both legs of line input, electronics for temperature controller, and 28/14VAC output. Switches: Heat ON/OFF and HIGH HEAT/LOW HEAT Controls: Set Temperature UP/DOWN The 5002A controller is designed for use with RTI’s test fixtures for liquid crystal FA testing. The temperature is measured at the heater block and not the package. The actual temperature of the die may be higher or lower than the temperature measured. ROBSON TECHNOLOGIES, INC. · 135 East Main Ave, Suite 130 · Morgan Hill, CA 95037 · 408-779-8008 [email protected] · www.testfixtures.com S6-2_TemperatureController_10/02

 Open the catalog to page 1

All Robson Technologies, Inc. catalogs and technical brochures

  1. CUSTOM DUT BOARDS - KeyTek ZAPMASTER MK.4
    CUSTOM DUT BOARDS - KeyTek ZAPMASTER MK.4

    1  Page

  2. RTI Remote Docking Interface for Credence Diamond D10
    RTI Remote Docking Interface for Credence Diamond D10

    2  Pages

  3. CUSTOM DUT BOARDS
    CUSTOM DUT BOARDS

    1  Page

  4. TS-900
    TS-900

    1  Page

  5. 512 DOCKING FIXTURES
    512 DOCKING FIXTURES

    1  Page

  6. 32/96 Pin Switch and Break Out Boxes
    32/96 Pin Switch and Break Out Boxes

    1  Page

  7. RTI 750 serieerieerieeries test fifixtureureures
    RTI 750 serieerieerieeries test fifixtureureures

    2  Pages

  8. 752 Series - Vertical Compression Fixture for module and sensor test
    752 Series - Vertical Compression Fixture for module and sensor test

    4  Pages

  9. RTI Direct Device Heating and Cooling - DirecTemp-1C Thermal Controller
    RTI Direct Device Heating and Cooling - DirecTemp-1C Thermal Controller

    2  Pages

  10. RTI’s DevICE Cube
    RTI’s DevICE Cube

    2  Pages

  11. LoRa Monitoring System
    LoRa Monitoring System

    2  Pages

  12. Direct Device Level Heating and Cooling - 4C Thermal Chiller
    Direct Device Level Heating and Cooling - 4C Thermal Chiller

    2  Pages

  13. OUT OF BODY EXPERIENCE: MEDICAL DEVICE TESTING AT 98.6º F Controlled Ambient Temperature Testing in an RF Enclosed Environment
    OUT OF BODY EXPERIENCE: MEDICAL DEVICE TESTING AT 98.6º F Controlled Ambient Temperature Testing in an RF Enclosed Environment

    1  Page

  14. 750 Series
    750 Series

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.