MULTIFUNCTIONAL ACCESSORIES
1 / 52Pages

MULTIFUNCTIONAL ACCESSORIES

Every small detail has a big impact on the entire system, especially when countless accessories fill hundreds of catalog pages. Developing an accessory for every new application fundamentally contradicts our concept of a World-Class Product Range. Our accessories are multifunctional and fit not only to an exactly defined component, but to all other components in the entire Modular Automation System. Cover or fasten universally usable Cover or Insert Extrusion fits 40 mm and 50 mm extrusions suitable for mounting 4 mm to 6 mm thick panels covers T-slots and protects against dust and water spray...

Multifunctional Accessories Conveyor Technology Accessories Speed Controller CCN 0004 Tilt Plate 80 Bent TIN 4571 Connection Shaft with Couplings COL 52_0 Fine-Tuning and Fixing Element TIN 4501 Safety Fence Floor Bracket BAP 205_ Safety Fence Accessories Weld Mesh PAN ____ Weld Mesh Clip SSP 4520 Safety Fence Fastener TIN 4511 90° Safety Fence Fastener TIN 4521 Screw Retainer Screw SSP 5500 Sliding Door Track DOL 4034 Sliding Door Stop DOR 4032 Door Support Castor DOR 456_ Safety Fence Floor Bracket BAP 205_

Linear Motion System Accessories Timing Belt Pulley LIN 5400 Timing Belt Clamp LIN 3221 Proximity Switch Bracket LIN 8201 Angle Plug with Cable LIN 8312 Connection Shaft with Coupling COL 5240 General Modular Accessories Connection Shaft with Couplings COL 52_0 Fine-Tuning and Fixing Element TIN 4501 T-Slot Sliding Rail CAL 4540 Aluminum Cover Extrusion CAL 4545 Safety Fence Floor Bracket BAP 205_ Base and Transport Plates BAP ____ Floor Mounting Plate BAP 4500 Allen Key for Hex Socket Head Cap Screws EQL 1001_

Technical Data Input voltage: 230 or 400 VAC Input frequency: 50/60 Hz Power output: 0.75 kW IP rating: IP66 European version Speed Controller type may vary by country / region Application Variable frequency drive for controlling motor speed Scope of delivery: Speed Controller un-wired or Controller with CEE oder SCHUKO plug, power cable and connecting cable to the conveyor Completely wired when ordering with conveyor, otherwise 3 m cable with flying leads Order Code Order Code1 Description Speed Controller (not wired) Power Supply 24V Application Power supply with rotary switch for...

Connection Hub Application For connecting adjustable timing belt conveyors Technical Data 49 Max. torque: 60 Nm Scope of Delivery 1 C8T Splined Shaft Clamping Ring 63 Hub 1 C8T Connection 1 Expanding Coupling LIN 5246 3 screws IBM M05x016 splined shaft length L = Wmax. – 43 Adjustable Drive Dimensions 201 Order Code Order Code Splined Shaft Application For connecting adjustable timing belt conveyors Technical Data Max. torque: 60 Nm Scope of Delivery 1 Splined Shaft, DIN-ISO 14 - 6x16x20 splined shaft length L = Wmax. - 43 Order Code Order Code1 Description Splined Shaft, cut to length...

Weld Mesh Application Used for Safety Fencing Fastening: • Weld Mesh Clip SSP4520 • Safety Fence Mesh Retainer SSP4515 Design tip: Standard widths and lengths offer an outstanding price/performance ratio and quick delivery. Technical Data Material: galvanized steel Order Code Order Code1 Description Weld Mesh, 40x40, galvanized, 461x1966 mm Weld Mesh, 40x40, galvanized, 719x1966 mm Weld Mesh, 40x40, galvanized, 977x1966 mm Weld Mesh, 40x40, galvanized, 1450x1966 mm Weld Mesh, 40x40x4 mm Panels Application Used for Safety Fencing Fastening: • Clamping Device PIN4521 • Cover/Insert Extrusion...

Weld Mesh Clip Application For form-located integration of Weld Mesh panels into an extrusion frame Technical Data Material: PA6 V0 Color: RAL 7004 (signal gray) Order Code Order Code Description Weld Mesh Clip Application For form-located integration of Weld Mesh panels into an extrusion frame • Electrically conductive connection between weld mesh panels and extrusion frame • can be used with non-standard spacing Transfer resistance per conductive connection: < 0,4 Ω Scope of Delivery 1 Mesh Retainer SSP4514 1 Set Screw GST M08x025 (waxed) Technical Data Material: steel Ø 3.8 - 4 mm...

Clamping Device Technical Data Material: PA6, black, galvanized steel Load: up to 250 N, perpendicular to slot Centerline: 1 - 10 mm Protection against inadvertent movement of panels through pre-tensioning of clamps Screw Retainer Retention Force Without pin: 200 N With pin (101857): 1500 N (Polycarbonate glass) Scope of Delivery 1 Clamping Device base part 1 Clamping Device sliding part 1 Screw IBS M04x25 1 Screw Retainer Application For attaching panels to extrusions, usable with 40 mm and 50 mm series extrusions • As standard, panels do not need to be drilled • High retention force...

Technical Data Material: impact-resistant PVC with soft lip, RAL 7004 (signal gray), UV-resistant, silicone-free Temperature range: -10°C to +60°C Application For fastening of panels between 1 - 3 mm and 3.1 - 6 mm thick, also suitable for later installation • Adequate protection against dust, water spray and noise • Appealing design Panel Profile inside width panel size = inside width - 15mm Snap in base, apply gasket Fastened panel Length Calculation Detail C Detail A: 90° corner piece with 90° corner piece Detail B: 90° corner piece with 270° corner piece Detail C: 270° corner piece with...

90° Corner Piece Application Used as 90° corner trim for Panel Profiles CAL4515 and CAL4517 Technical Data Material: POM, UV-resistant, silicone-free Color: RAL 7004 (signal gray) Temperature Range: -10 °C to +60 °C 36 Scope of Delivery 1 90° Corner Piece base part 1 90° Corner Piece top part + 90° Corner Piece base part (101419) = 90° Corner Piece top part (101420) Detail A: 90° Corner Piece with 90° Corner Piece Detail B: 90° Corner Piece with 270° Corner Piece Order Code Order Code Description 90° Corner Piece Kit 90° Corner Piece base part 90° Corner Piece top part Drawing dimensions in mm

270° Corner Piece Application Used as 270° corner trim for Panel Profiles CAL4515 and CAL4517 Technical Data Material: PA6, UV-resistant, silicone-free Color: RAL 7004 (signal gray) Temperature Range: -10 °C to +60 °C 23.4 Scope of Delivery 1 270° Corner Piece base part 1 270° Corner Piece top part A 45° miter cut of the extrusion is necessary if the 270° Corner Piece is to be used. + 270° Corner Piece base part (101421) = 270° Corner Piece top part (101422) Detail B: 90° Corner Piece with 270° Corner Piece Detail C: 270° Corner Piece with 270° Corner Piece Order Code Order Code Description...