THE SMART EXTRUSION AND FASTENING TECHNOLOGY

The key elements of the Modular Automation System are the unique Extrusion and Fastening Technologies. Extrusions, available in 40 and 50 mm size series, are fully compatible due to a common 14 mm slot size. This opens up a wide range of possibilities in automation. In combination with a strong Fastening Technology, the system is unique in its stability and rigidity as well as in its enormous potential for time savings – from design to assembly. One slot size fits all • 13 extrusion shapes in 40 mm and 50 mm extrusion sizes simplify the application • large, uniform 14 mm wide and 14 mm deep T-slot...

Fastening Technology, 40 mm Series Fastening Technology, 50 mm Series Fastening Technology, 40 mm and 50 mm Series Corner Bracket 100, one side centered GUS110_ T-Nut In-Line Fastener TIN0171

Technical data Material: EN AW-6063-T66 satin anodized aluminum Section modulus Wx: 2.9 cm3 Section modulus W y: 1.0 cm3 Geometrical moments of inertia: against x Ix: 5.8 cm4 against y ly: 0.8 cm4 against torsion It: 0.6 cm4 Cross sectional area A: 323.6 mm2 Tolerances and deflection see pages 198 to 199 Application Universally applicable, e.g. for: • Signs, shelves, racks (smooth surfaces) • Material handling equipment • Workstations Usable extrusion length: 6000 mm Order code Item Extrusion 16x40, cut to length Extrusion 16x40, unit Tolerances and deflection see pages 198 to 199 Application Universally...

Tolerances and deflection see pages 198 to 199 Technical data Material: EN AW-6063-T66 satin anodized aluminum Section modulus Wx: 15.4 cm3 Section modulus W y: 8.4 cm3 Geometrical moments of inertia: against x Ix: 61.6 cm4 against y ly: 16.8 cm4 against torsion It: 9.3 cm4 Cross sectional area A: 1013.2 mm2 Application Universally applicable, e.g. for: Base extrusion Assembly cells Base frames Material conveyors Shelves Conveyor Belts In- and out-feed conveyors Usable extrusion length: 6000 mm Order code Item Extrusion 40x80, cut to length Extrusion 40x80, unit Extrusion 40x80, pack Technical...

Extrusion 40x40 Lean Line Technical data Material: EN AW-6063-T66 satin anodized aluminum Section modulus Wx / Wy: 3.3 cm3 Geometrical moments of inertia: against x + y Ix / ly: 6.5 cm4 against torsion It: 0.6 cm4 Cross sectional area A: 431.0 mm2 Tolerances and deflection see pages 198 to 199 Application Universally applicable, e.g. for: • Safety fences • Lightweight structures • Signs, shelves and racks Usable extrusion length: 6000 mm Order code Description M8x50 thread on both ends 1 unit, length 6050 mm Pack of 80 units, length 6050 mm Extrusion 40x80 Lean Line Usable extrusion length: 6000...

Tolerances and deflection see pages 198 to 199 Technical data Material: Aluminum satin anodized Section modulus Wx: 27.6 cm3 Section modulus W y: 6.8 cm3 Geometrical moments of inertia: against x Ix: 182.2 cm4 against y ly: 19.3 cm4 against torsion It: 1.2 cm4 Cross sectional area A: 1108.8 mm2 Application Universally applicable, e.g. for: Roller conveyors Cable ducts Workstations In- and out-feed conveyors Usable extrusion length: 6000 mm Cover Extrusion for PIL4012 See page 176 Order code Order code PIL4012SNN PIL4012NNN PIL4012PAC Drawings: dimensions in mm Item Extrusion 40x120, cut to length...

Technical data Material: EN AW-6063-T66 satin anodized aluminum Section modulus Wx / Wy: 8.0 cm3 Geometrical moments of inertia: against x + y Ix / ly: 20.0 cm4 against torsion It: 4.8 cm4 Cross sectional area A: 857.5 mm2 Tolerances and deflection see pages 198 to 199 Application Preferably in mechanical engineering, e.g.: Safety guards Table frames Axes for linear motion systems Assembly cells Workstations Usable extrusion length: 6000 mm Order code Item Extrusion 50x50, cut to length Extrusion 50x50, unit Extrusion 50x50, pack Technical data Material: EN AW-6063-T66 satin anodized aluminum...

Tolerances and deflection see pages 198 to 199 Usable extrusion length: 6000 mm Technical data Material: EN AW-6063-T66 satin anodized aluminum Section modulus Wx: 107.8 cm3 Section modulus W y: 33.6 cm3 Geometrical moments of inertia: against x Ix: 1077.8 cm4 against y ly: 84.1 cm4 against torsion It: 107.0 cm4 Cross sectional area A: 2962.8 mm2 Application Preferably in mechanical engineering for heavy-duty structures, e.g.: Machine frames Gantries Axes for linear motion systems Cranes Robot frame structures Order code Order code PIL5020SNN PIL5020NNN PIL5020PAC Drawings: dimensions in mm Item...

Technical data Material: EN AW-6063-T66 satin anodized aluminum Section modulus Wx / Wy: 61.1 cm3 Geometrical moments of inertia: against x + y Ix / ly: 305.6 cm4 against torsion It: 256.0 cm4 Cross sectional area A: 2714.4 mm2 Tolerances and deflection see pages 198 to 199 Application Preferably in mechanical engineering for heavy-duty structures, e.g. Machine frames Gantries Axes for linear motion systems Cranes Robot frame structures Usable extrusion length: 6000 mm Order code Item Extrusion 100x100, cut to length Extrusion 100x100, unit Extrusion 100x100, pack Technical data Material: EN AW-6063-T66...

Tolerances and deflection see pages 198 to 199 Usable extrusion length: 6000 mm Technical data Material: EN AW-6063-T66 satin anodized aluminum Section modulus Wx: 102.8 cm3 Section modulus W y: 14.1 cm3 Geometrical moments of inertia: against x Ix: 1027.9 cm4 against y ly: 17.6 cm4 against torsion It: 9.8 cm4 Cross sectional area A: 2891.7 mm2 Application Particularly suitable as: • Carriage plate for a Linear Motion Unit • Mounting plate for sliding carriage • Upright as support profile Order code Order code PIL2520SNN PIL2520NNN Drawings: dimensions in mm Item Extrusion 25x200, cut to length...

Fastener 16x40 Application 90° fastener for extrusion PIL1640 Kit includes: 1 Fastener FAS1640 1 Drop-in Nut TIN4506 3 Cap screws ISO 4762 M6x18 Tightening torque Cap screw ISO 4762 M6x18: 10 Nm Technical data Material: clear anodized aluminum and galvanized steel Order code Order code FAS1641 Application 90° fastener on 40 mm series for extrusions PIL 4040 and PIL 4080 transverse Transfer resistance per conductive connection: < 0.4 Ω Load index See page 200 Tightening torque Cap screw ISO 4762 M6x18: 10 Nm Button-head screw ISO 7380 M8x25: 12 Nm Kit includes: 1 Fastener FAS4040 2 Drop-in Nuts...