*mydirectindustry

TOTAL 8

Product catalog summary

Identification of the Substance/Mixture and Company:
The product, TOTAL 8, is a filler for surface repair intended for professional and industrial use. It is supplied by Roberlo S.A.U., Spain, with emergency contact numbers available for immediate assistance.

Hazards Identification:
The product is classified under the CLP Regulation (EC) No 1272/2008. It poses several hazards including eye irritation, flammability, reproductive toxicity, skin irritation, skin sensitization, and specific target organ toxicity. Key hazard statements highlight risks of flammability, skin and eye irritation, potential allergic reactions, and organ damage from prolonged exposure.

Composition/Information on Ingredients:
The mixture includes chemicals such as styrene, calcium carbonate, and titanium dioxide, with styrene and cobalt bis(2-ethylhexanoate) noted for their health and environmental hazards.

First Aid Measures:
For inhalation, move the person to fresh air and seek medical attention if needed. In case of skin contact, rinse with water and soap. For eye contact, rinse thoroughly with water. Do not induce vomiting if ingested.

Firefighting Measures:
Use ABC powder, foam, or CO₂ extinguishers and avoid full jet water. Firefighters should wear protective clothing and SCBA. Prevent extinguishing media from contaminating water sources.

Accidental Release Measures:
Isolate leaks, use personal protective equipment, and avoid ignition sources. Absorb spills with inert materials and dispose of them according to regulations.

Handling and Storage:
Ensure safe handling by keeping containers sealed and controlling spills. Avoid ignition sources and static electricity. Store between 5°C and 30°C, away from food and heat sources.

Exposure Controls/Personal Protection:
Monitor occupational exposure limits for substances like N-butyl acetate and ethyl acetate. Use appropriate personal protective equipment to minimize exposure risks.

Training Recommendations:
Training is advised to prevent industrial risks for staff using the product and to aid in understanding and interpreting the safety data sheet and product label.

Principal Bibliographical Sources:
Sources include ECHA and EUR-Lex.

Abbreviations and Acronyms:
Includes ADR, IMDG, IATA, ICAO, COD, BOD5, BCF, LD50, LC50, EC50, LogPOW, Koc, UFI, and IARC.

Changes from Previous Version:
The safety data sheet is based on current European and state legislation. It describes security requirements but does not guarantee product properties. Users are responsible for legal compliance in handling, storage, use, and disposal of chemical products. The information is specific to this product.

Document Details:
Date of Compilation: 13/07/2021, Revised: 06/04/2023, Version: 5 (Replaced 4).

Catalog excerpts

Safety data sheet This SDS is an English translation of COMMISSION REGULATION (EU) 2020/878, without any country-specific legislation SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifier: Other means of identification: UFI: 1.2 Relevant identified uses of the substance or mixture and uses advised against: Relevant uses: Filler for repairing surfaces. For professional users/industrial user only. Uses advised against: All uses not specified in this section or in section 7.3 Details of the supplier of the safety data sheet: Roberlo S.A.U. Ctra. Nacional II, Km. 706,5 17457 Riudellots de la Selva - Gerona - España Phone: +34 972 478060 (8:00-12:45 / 14:15-17:30 h) ROBERLO (España) (GMT +1:00) - Fax: +34972477394 [email protected] Emergency telephone number: +44 (0)1924 431679 / 112 / +34 972 478060 (8:00-12:45 / 14:15-17:30 h) ROBERLO (Spain) (GMT + 1:00) SECTION 2: HAZARDS IDENTIFICATION ** 2.1 Classification of the substance or mixture: CLP Regulation (EC) No 1272/2008: Classification of this product has been carried out in accordance with CLP Regulation (EC) No 1272/2008. Eye Irrit. 2: Eye irritation, Category 2, H319 Flam. Liq. 3: Flammable liquids, Category 3, H226 Repr. 2: Reproductive toxicity, Category 2, H361d Skin Irrit. 2: Skin irritation, Category 2, H315 Skin Sens. 1A: Sensitisation, skin, Category 1A, H317 STOT RE 1: Specific target organ toxicity — Repeated exposure, Hazard Category 1 (Inhalation), H372 Label elements: CLP Regulation (EC) No 1272/2008: Danger Hazard statements: H226 - Flammable liquid and vapour. H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H361d - Suspected of damaging the unborn child. H372 - Causes damage to organs through prolonged or repeated exposure (Inhalation). Precautionary statements: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280: Wear protective gloves/face protection/protective clothing/respiratory protection/protective footwear. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313: IF exposed or concerned: Get medical advice/attention. P370+P378: In case of fire: Use ABC powder extinguisher to extinguish. P501: Dispose of contents/container in accordance with regulations on hazardous waste or packaging and packaging waste respectively. Supplementary information: EUH212: Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. Substances that contribute to the classification styrene; Cobalt bis(2-ethylhexanoate) ** Changes with regards to the previous version - CONTINUED ON NEXT PAGE Date of compilation: 13/07/2021

Open the catalog to page 1

Safety data sheet This SDS is an English translation of COMMISSION REGULATION (EU) 2020/878, without any country-specific legislation SECTION 2: HAZARDS IDENTIFICATION ** (continued) UFI: 2.3 Other hazards: Product fails to meet PBT/vPvB criteria Endocrine-disrupting properties: The product fails to meet the criteria. ** Changes with regards to the previous version SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS ** 3.1 Substance: Non-applicable Mixture: Chemical description: Mixture composed of additives, aggregates, pigments and resins in solvents Components: In accordance with Annex II of...

Open the catalog to page 2

Safety data sheet This SDS is an English translation of COMMISSION REGULATION (EU) 2020/878, without any country-specific legislation SECTION 4: FIRST AID MEASURES 4.1 Description of first aid measures: The symptoms resulting from intoxication can appear after exposure, therefore, in case of doubt, seek medical attention for direct exposure to the chemical product or persistent discomfort, showing the SDS of this product. By inhalation: Remove the person affected from the area of exposure, provide with fresh air and keep at rest. In serious cases such as cardiorespiratory failure, artificial...

Open the catalog to page 3

Safety data sheet This SDS is an English translation of COMMISSION REGULATION (EU) 2020/878, without any country-specific legislation SECTION 6: ACCIDENTAL RELEASE MEASURES (continued) For emergency responders: Wear protective equipment. Keep unprotected persons away. See section 8. 6.2 Environmental precautions: It is recommended to avoid environmental spillage of both the product and its container. Methods and material for containment and cleaning up: It is recommended: Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible...

Open the catalog to page 4

Safety data sheet This SDS is an English translation of COMMISSION REGULATION (EU) 2020/878, without any country-specific legislation SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued) Directive (EU) 2000/39, Directive 2004/37/EC,Directive (EU) 2006/15, Directive (EU) 2009/161, Directive (EU) 2017/164, Directive (EU) 2019/1831: Identification Occupational exposure limits IOELV (8h) IOELV (STEL) IOELV (STEL) IOELV (STEL) IOELV (STEL) Dipropylene Glycol Methyl Ether IOELV (STEL) DNEL (Workers): Short exposure Identification Calcium Carbonate Long exposure Systemic N-butyl acetate Ethyl...

Open the catalog to page 5

Safety data sheet This SDS is an English translation of COMMISSION REGULATION (EU) 2020/878, without any country-specific legislation SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued) Short exposure Identification Long exposure Systemic Ethyl acetate Dipropylene Glycol Methyl Ether Fresh water Marine water Sediment (Fresh water) Sediment (Marine water) Calcium Carbonate Fresh water Marine water Sediment (Fresh water) Sediment (Marine water) N-butyl acetate Fresh water Marine water Sediment (Fresh water) Sediment (Marine water) Fresh water Marine water Sediment (Fresh water) Sediment...

Open the catalog to page 6

Safety data sheet This SDS is an English translation of COMMISSION REGULATION (EU) 2020/878, without any country-specific legislation SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued) In accordance with the order of importance to control professional exposure (Directive 98/24/EC) it is recommended to use localized extraction in the work area as a collective protection measure to avoid exceeding the occupational exposure limits. In case of using personal protective equipment it should have CE marking in accordance with Directive 2016/425/EC. For more information on Personal Protective...

Open the catalog to page 7

TOTAL 8

TOTAL 8

Catalog excerpts

All Roberlo S.A. catalogs and technical brochures