RX-700 Cold Planer

Product catalog summary

Overview: The RX-700 Cold Planer is designed for high productivity in half-lane milling operations. It features a 700 hp Caterpillar engine and is available in four-track or three-track assemblies. The machine is engineered for balanced weight distribution, user-friendly operation, and maintenance.

Specifications: The RX-700 can cut up to 14 inches deep with standard widths ranging from 6'7" to 10'. It includes a 60° front load-out conveyor swing and an optional Variable Cutter System (VCS) for narrower cuts.

Engine: Equipped with a Caterpillar C18 engine, offering 700 hp at 2100 rpm, and includes a one-year unlimited warranty. It features a 24-volt charging system and an emergency shutdown system.

Construction: The machine is built with high-strength steel side sheets for stability and balance without unnecessary weight.

Drive System: Features a hydrostatic drive for propulsion and conveyor systems, automatic traction control, and hydraulically controlled suspension.

Controls and Steering: Includes full-function operator control stations with proportional joystick control and multiple steering modes. It also has a lighted instrument console and ground-level controls.

Tracks and Speeds: The RX-700 offers polyurethane bolt-on replaceable track pads with different configurations for four-track and three-track assemblies, providing various travel and working speeds.

Conveyors: The machine has a 36-inch wide primary and load-out conveyor with molded rubber cleats and a 120° swing capability.

Electrical and Lights: Comes with a 4 kW generator set, a light package with multiple lights, and several power outlets.

Service Capacities: Fuel capacity is 340 gallons, water capacity is 1100 gallons, and the hydraulic system holds 100 gallons.

Water System: Features a variable speed hydraulically-driven water pump with automatic on/off for spray bars and a long washdown hose.

Additional Features: Includes an air compressor, remote grease fittings, operator’s sunshade, and warning systems.

Cutter Housing and Drum: The RX-700 offers a maximum cutting depth of 14 inches with various cutter drum options and configurations for different milling needs.

Options: Available options include hydro-mechanical grade control, digital grade control, cold-in-place options, and various other enhancements for specific operational needs.

Dimensions and Weights: The transport length is 54'9", with approximate shipping weights varying based on track configuration.

Catalog excerpts

RX-700 Cold Planer Cutter Housing and Cutter Drum Maximum Cutting Depth: 14" (35.6cm) Standard Tooth Spacing: 5/8" (16mm) Standard Tip Diameter: 44" (111.8cm) Standard Features Housing has 10° angled front and rear mold boards for efficient material evacuation. Powered wrap-around endgates with replaceable wear shoes. Wear liners in all high wear areas. Bolt-on cutter assembly with mechanical v-belt drive. Automatic drive belt tensioning. W-50 Fairfield cutter gear box with “breakaway” input shaft. Front & rear water spray bars with flow and pressure control. Triple wrap, single hit drum system...

Open the catalog to page 2

RX-700 Cold Planer

RX-700 Cold Planer

Catalog excerpts

All Roadtec catalogs and technical brochures

Archived catalogs