Half-lane cold planer Half-Lane Cold Planer RX-600e: Tier 4i; Cummins® QSX-15 620 hp (462 kW) @ 1,850 rpm Rx-600ex: Tier 3; Cummins® QSX-15 620 hp (462 kW) @ 1,850 rpm* * ex machines for lesser regulated countries OPERATING WEIGHT

Our Customers “I have to give Roadtec credit, because they’re the best people I’ve seen in terms of supporting their equipment.” “Handling asphalt is tough on machines, but Roadtec equipment holds up. Roadtec designs stuff to do the job.” © 2013 Roadtec, Inc. All Rights Reserved “We’ve got some Roadtec pavers with well over 10,000 hours on them.” “They’re exceptional about support, whether it’s parts or other issues.”

Count on Roadtec Equipment & customer service Dependability Roadtec has been manufacturing innovative, heavyhighway equipment since 1981. We continue to grow and add new products, yet our personal connection to our customers and our ability to respond immediately to your needs is even stronger. At Roadtec, we understand that our success hinges on the success of the customer. To accomplish this common goal, we focus on building reliable, long lasting machines that consistently perform at the highest level. Roadtec is dedicated to giving the customer every advantage to excel in the field. Longevity...

Choose Either Three or Four Tracks The new generation of Roadtec machines arrives with a slight change in terminology used to classify each model. The model number of each new machine will include the letters “e” or “ex”. The single letter “e” denotes that the machine’s engine has a Tier IV emissions rating. The letters “ex” denote that the machine’s engine has a Tier III emissions rating. The “ex” models are machines exported to countries that do not require a Tier IV emissions rating. All features listed in this brochure apply to both “e” and “ex” models. With the RX-600 you can select either...

RX-600: More Power, Efficiency, and Maneuverability It Starts with a Strong Frame Fuel Economy & Engine Performance The mainframe is built by Roadtec from extremely strong A656 grade 80 steel. This steel has twice the yield strength as the mild steel used in other machines on the market. Roadtec frames are very strong and rigid without adding unnecessary weight. Having the proper balance of weight and horsepower combined with the latest in engine technology ensures that every unit of fuel being burned is not wasted. This makes the RX-600 the most fuel efficient machine we have ever built. Keyway...

Operator Convenience Controls Simplified controls allow operators to easily operate the machine from either side of the platform. With multifunction joysticks and easy access to controls, operating the machine is much easier. The controls are designed to be operated with one hand to allow for truck signaling. Vibration Isolators Rubber vibration isolators have been used to eliminate destructive vibration throughout the cold planer. Eliminating the vibration also makes the machine quieter while rubber mounts underneath the operator’s platform provide more comfort. Safe & Functional Platform The...

Conveyors The cut material is easily handled by 32” (813 mm) wide conveyor with 1” (25 mm) tall molded cleats, and infinitely variable speed. Each conveyor also features self cleaning pulleys which release wet material from the conveyors to ensure maximum efficiency. Canvas conveyor covers also comes standard providing easier access. Sound Absorption The variable speed fans drastically reduce the engine noise. The engine compartment hoods are also lined with a sound absorbing material which keeps the sound of the engine away from the operator. Conveyor Swing Mobility is critical. The secondary...

CUtTer Housing Cutter Housing The cutter housing and drum are completely modular allowing it to be easily interchanged with other width housing and drums. The inside walls of the cutter housing are fully lined with replaceable chromium-clad wear plates to ensure the housing withstands the abuse of the milling operation. Dual Spray Bars • Adjustable endgates with replaceable shoes at the high-wearing front and rear corners Two independent stainless steel spray bars positioned at the front and rear of the cutter housing provide increased tool life and dust control. Each spray bar can be controlled...

Adjustable Moldboards The angled rear moldboard can be set in a fixed position or in float mode. Float allows the moldboard to adjust up and down with the elevation of the cut, and the height of the rear moldboard is fully adjustable. When the moldboard is fully raised the engine is shut down for safety. Both the rear and front moldboard on the RX-600 are angled in toward the drum. This allows less material to accumulate around the drum, which means increased component life, production rates, and efficiency.

CUtter DRUMS Cutter Drums Specialty cutter drum designs are available from wide spaced excavating patterns to fine spaced micro milling patterns as well as double hit drums to improve production without sacrificing quality of cut. Multiple tooling options are available including Sollami®, Kennametal® and Keystone® Quick Change systems. With our engineering expertise we can design drums best suited for your application that will offer you the lowest operating costs and maximize your profitability. All of the cutter drums are designed and built by us utilizing three-dimensional solid modeling and...

Drum Styles • Standard 5/8” (16 mm) Single Hit Triple Wrap: The most versatile drum available. Good performance at varying depths. Double Hit Quad Wrap: Drum designed for typical cut depths for overlays. These drums can improve forward speed of machine without sacrificing surface texture and increase tooth life. Single Hit Profiling: For 4” or less of removal at a normal 40 to 50 fpm. Single Hit Micromill: Fine milling, for 2” or less of removal at slow speeds (20 to 25 fpm to leave straight lines). Double Hit Micromill: Fine milling, for 2” or less of removal at higher speeds (40 to 50 fpm to...