video corpo

RP-190e

RP-190e

RP-190e

Product catalog summary
Engine Specifications: The RP-190e is equipped with a Tier 4i, Cummins® QSB 6.7 engine delivering 230 hp (172 kW) at 1,800 rpm.
Weights and Dimensions: The machine weighs 38,800 lbs (17,600 kg). It features a chassis with 0.75” (19 mm) thick continuous side sheets and a 2” (51 mm) thick front cross frame member.
Electrical System: Includes two 4D batteries, a 95 amp alternator, and a 24v system with a master disconnect switch. Electric-over-hydraulic solenoids with manual override are also present.
Cooling System: Features a low noise, variable speed, hydraulically-driven fan.
Propel System: Utilizes variable-displacement hydraulic pumps and two-speed hydraulic motors with direct hydraulic, single-speed planetary final drives. Steering is controlled via a steering wheel.
Speed: Paving speed ranges from 0-284 fpm (86 m/min), and travel speed is 0-12 mph (19 km/h).
Brake System: Equipped with hydrodynamic disc caliper brakes and a parking brake.
Tires: The paver uses two hydroflated high flotation 18” x 25” sand rib drive tires and dual 14” x 22” front bogies.
Operator Stations: Features hydraulic swing Comfort Drive® operator stations that can rotate for increased visibility. Controls move with the seat, and armrest Comfort DriveTM fingertip paver function control is included.
Fume Extraction System: The Clearview FXS® system provides a clear view to the front and augers.
Front Hopper Capacity: The hopper holds 13.8 tons (12.5 mt) or 252 ft³ (7.1 m³), excluding tunnels.
Feed System: Independently-driven, variable-speed feeder conveyors with a sonic feeder control system. Features cast, 16” diameter, 0.75” thick, ni-hard augers that can be hydraulically adjusted.
Service Capacities: Fuel tank capacity is 100 gallons (379 liters), hydraulic fluid tank holds 76 gallons (288 liters), and the cooling system has an 8.75-gallon (33 liters) capacity.
Screeds: Various screed options are available, including Roadtec S-10, Carlson EZ III-10, Carlson EZ IV-10, and Roadtec Eagle® 10, each with specific features like electric heating and vibratory functions.
Screed Options: Hydraulic screed assist and boost packages are available for enhanced performance.
Tractor Options: Includes front wheel assist, truck hitch, and hydraulic tunnel extensions.
Non-Contacting Screed Automation: Features TOPCON® and MOBA® sonic grade and slope control systems.
See more

Catalog excerpts

RP-190e-1

10’ (3 M) Rubber Tire Asphalt Paver RP-190e Specifications & Options Engine • .75” (19 mm) thick continuous side sheets 2” (51 mm) thick front cross frame member. Brake System • • • Two 4D batteries & 95 amp alternator 24v system with master disconnect switch Electric-over-hydraulic solenoids with manual override. COOLING SYSTEM • Low noise, variable speed, hydraulically-driven fan. PropEl System • • • Variable-displacement hydraulic pumps Two-speed hydraulic motor. Direct hydraulic, single speed planetary final drives. Steering wheel Paving speed: 0-284 fpm (86 m/min) Travel speed: 0-12mph (19 k/hr) (2) hydroflated high flotation 18” x 25” sand rib drive tires Dual 14” (356 mm) x 22” (559 mm) front bogies OPERATOR STATIONS • Electrical System • • • Hydrodynamic disc caliper brakes and parking brake Hydraulic swing Comfort Drive® operator stations. Operator stations can rotate out past edge of machine for increased visibility. Controls move with seat. Armrest Comfort DriveTM finger tip paver function control. Fume Extraction System • Clearview FXS® fume extraction system. Clear view to the front and of the augers. Front Hopper Capacity • 13.8 ton (12.5 mt) / 252 ft3 (7.1 m3). Does not include tunnels. Feed System • • • • Independently-driven, variable-speed feeder conveyors 650 BHN center chromium carbide clad conveyor plates. Bolt free design. Sonic feeder control system Cast, 16” (406 mm) dia., 0.75” (19 mm) thick, ni-hard augers. Hydraulically raise, lower and tilt auger assembly. Electric flow gates for easy control of head of material

 Open the catalog to page 1
RP-190e-2

Service Capacities • • • Front extendable 10’ (3,048 mm), electrically heated, vibratory screed. 26” (660 mm) long screed plate. Paves up to 17’ (5,182 mm) wide Front extendable 10’ (3,048 mm), electrically heated, vibratory screed. 26” (660 mm) long screed plate. Paves up to 19’ (5,182 mm) wide Standard, fixed-width 10’ (3,048 mm) electrically-heated, vibratory screed. 32” (813 mm) long screed plate. Hydraulic Screed Assist Package For Eagle® screed. Constant up pressure on screed while in pave mode (forward and neutral). Hydraulic Screed Boost Package Screed Options Rear extendable 10’ (3,048...

 Open the catalog to page 2

All Roadtec catalogs and technical brochures

  1. RP-195e

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.