*mydirectindustry

Primo Sort

Product catalog summary

Specifications
The Primo Sort High Speed Sorter is designed for high-speed distribution, capable of sorting up to 75 items per minute depending on product size. Key specifications include:

Air Cylinder: 2-inch diameter bore.
Stroke Length: Available up to 36 inches.
Pusher Plate: Made of 1/8-inch aluminum channel.
Maximum Cycle Rate: Up to 75 cycles per minute.
FRL: Included with 3/8-inch ports.
Compressed Air Requirement: 0.5 cubic feet per minute at 80 to 100 PSI per cycle.
Pneumatic Controls: Slow down cushion at rest position.
Enclosure: NEMA 1 housing for terminal strip connections.
Wiring Diagram: Located inside the terminal box.
Electrical Controls: 24 VDC single solenoid with 2 Hall effect sensors. Optional 120 volt, single or double solenoid available.

Model Specification
Model numbers are specified as PRIMO(stroke)-(between frames), with stroke available up to 36 inches. Example: PRIMO224-21.

Additional Features
The sorter is sold separately from the conveyor. It features a hood that can be raised and lowered using a convenient handle.

Catalog excerpts

PRIMO SORT HIGH SPEED SORTER SPECIFY MODEL NUMBER PER EXAMPLE Primo(stroke)-(between frames] Conveyor sold seperally The Primo Sort High Speed Sorter was designed in response to an increasing demand for high speed distribution equipment. Up to 75 sorts per minute (based on size of product) can be economically and accurately sorted with the Primo. LENGTH OF STROKE: Up to 36" available. PUSHER PLATE: 1 /8" aluminum channel. MAXIMUM CYCLE RATE: Up to 75 cycles/min. COMPRESSED AIR: 0.5 cu. ft./min. at 80 to 100 PSI per cycle PNUEMATIC CONTROLS: Pnuematics slow down cushion at rest position ENCLOSURE: NEMA 1 houses terminal strip for all wiring connections. WIRING DIAGRAM: Housed inside of terminal box. ELECTRICAL CONTROLS: 24 VDC single solenoid. 2 hall effect sensors. OPTIONAL: 120 volt, single or double solenoid Convenient handle for raising ana1 lowering the hood

Open the catalog to page 1