MODEL HSS2 HIGH SPEED SORTER

1 / 1 PageView full catalog

MODEL HSS2 HIGH SPEED SORTER

Product catalog summary

Specifications:

Model: HSS2 High Speed Sorter
Air Cylinder: 2" diameter bore
Stroke Lengths: Available in 18", 24", 30", and 36"
Pusher Plate: 30" wide x 6" high x 1/8" aluminum channel
Maximum Cycle Rate: 35 cycles per minute
Push-Off Cycle Time: 0.8 seconds ± 0.1 second per cycle
FRL: Included with 3/8" ports
Compressed Air Requirement: 0.5 cu. ft./min. at 80 to 100 PSI per cycle
Enclosure: NEMA 1 housing terminal strip for wiring connections
Wiring Diagram: Located inside terminal box
Electrical Controls: 115 volt, single phase, 60 hertz, 50 millisecond pulse signal with a 3-position control switch (auto, off, test), sensor for complete push-off cycle detection, stall timer, and conveyor stop signal if cycle time exceeds stall timer setting
Miscellaneous Terminals: Provided for wiring to back-up sensors, warning light and buzzer, and push-off cycle counter

Overview:

The Roach High Speed Sorters, including the HSS2 model, are designed to meet the growing demand for high-speed distribution equipment. The model HSS2 can sort economically and accurately at a rate of 35 sorts per minute.

Model Specification:

Specify the model number using the format: HSS2(stroke)-(between frames). Stroke options include 18", 24", 30", and 36".

Catalog excerpts

SPECIFY MODEL NUMBER PER EXAMPLE > HSS218-15HSS218-15 HSS2(stroke)-(between frames)Stroke available in 18", 24", 30" and 36" Roach High Speed Sorters were designed in response to an increasing demand for high speed distribution equipment.35 sorts per minute can be economically and accurately sorted with model HSS2. MISC. TERMINALS: Provided for wiring to back-up sensors which inhibit diverter action until condition is cleared. Terminals also provided for connecting back-up warning light and buzzer and for connecting a push-off cycle counter. SPECIFICATIONS AIR CYLINDER: 2" dia. bore. ELECTRICALCONTROLS: 115 volt, singlephase, 60 hertz 50 millisecond pulse signal. Unit also includes following controls: 3-position control switch--(1) auto, (2) off, (3) test; sensor to detect complete push-off cycle; stall timer; signal to stop conveyor if cycle time exceeds time set on stall timer. LENGTHOFSTROKE: 18", 24", 30" and36" available. PUSHERPLATE: 30" wide x 6"high x1/8"aluminum channel. MAXIMUM CYCLERATE: 35 cycles/min. PUSH-OFFCYCLETIME: 0.8 second 0.1 second per cycle. FRL: Included, w/ 3/8" ports. COMPRESSEDAIR: 0.5 cu. ft./min. at80 to 100 PSI per cycle. ENCLOSURE: NEMA1 houses terminalstrip for all wiring connections. WIRING DIAGRAM: Housed inside ofterminal box. > Ѯ 4 week shipment >

Open the catalog to page 1