• Model: CD280, 2-Strand Chain Drag Conveyor
• Frame: 7 gauge formed boxed channel
• Carrier Chain: No. 80 (CD280) or No. 60 (CD260) riveted roller chain
• Wear Strip: UHMW long-lasting wear strip, upper and lower
• Chain Centers: 18 inches
• Chain Take-Up: Screw type located at tail end
• End Drive: Allows one-direction operation; optional center drive for reversible application
• Chain Speed: 35 FPM constant
• Bearings: Heavy-duty, lubricated, ball bearing unit with cast iron housings
• Capacity: Unit load not to exceed 3000 lbs
• Motor Drive: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor
• Electrical Controls: Optional

• Strands: 3, 4 or more
• Construction: Durable structural frame
• Chain Center: 12", 24" or as required by application
• Floor Supports: Available, see Conveyor Accessories
• Chain Speed: 35-120 FPM, constant speed (specify); other constant or variable speeds available (note: capacity changes with speed)
• Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
• Electrical Controls: Manual start/stop push button switch; magnetic starter; photo eye; limit switch; photo relay; others available

Chain drag conveyors are designed to convey heavy-duty unit loads and are often suited for products with unusual conveying characteristics such as pallets or specialty tote pans. The unit shown features optional structural construction and optional supports.