Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. roach conveyor
  3. MODEL 796LSZ W/SENSOR ROLLERS LINE SHAFT ZERO PRESSURE ACCUMULATOR
video corpo

MODEL 796LSZ W/SENSOR ROLLERS LINE SHAFT ZERO PRESSURE ACCUMULATOR

MODEL 796LSZ W/SENSOR ROLLERS LINE SHAFT ZERO PRESSURE ACCUMULATOR
1 / 2 PagesView full catalog

MODEL 796LSZ W/SENSOR ROLLERS LINE SHAFT ZERO PRESSURE ACCUMULATOR

Product catalog summary
Specifications:
  • Tread Rollers: 1.9" diameter x 16 gauge steel, model 196S grooved.
  • Drive Belt: 3/16" diameter polyurethane belts, nominal 15 lbs. per roller drive.
  • Drive Shaft: 1" diameter C1018 cold rolled steel shaft.
  • Couplings: Available in types "A", "B", "C", or "D". Refer to the line shaft coupling chart for specifications.
  • Center Drive: Located approximately 16-1/2" from the end of the bed section on 4" RC; 18" on 3" and 6" RC.
  • Speed: Constant 60 feet per minute (FPM).
  • Accumulation Zone: 2'-0" zone length, pneumatically actuated, zone singulation operation.
  • Bearings: Precision, lubricated, ball bearing units with composite housings.
  • Bed: 7" x 1-1/2" x 12 gauge formed steel channel frame.
  • FRL: Unit includes filter, regulator, lubricator with 1/4" ports.
  • Pneumatic Actuation: Maximum air line pressure should not exceed 30 PSI.
  • Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
  • Roller Chain: Drive shaft driven by No. 50 chain with chain take-up on motor base.
  • Capacity: Refer to the technical section for load capacity rating.
  • Electrical Controls: Optional.
Model 796LSZ Features:
  • Popular zero pressure line shaft driven accumulator for light to medium duty applications.
  • Curves, spurs, and other line shaft modules can be driven by a single drive.
Optional Equipment:
  • Galvanized Rollers: Available in galvanized steel, model 196G.
  • Floor Supports: Various height supports, knee braces, casters, polytier supports, and ceiling hangers available.
  • Conveyor Speed: Constant speed 15-120 FPM; DC variable speed; AC inverter variable speed.
  • Motors: Available up to 2 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
  • Guard Rails: Various models and configurations available.
  • Electrical Controls: Options for magnetic or manual starter, momentary start/stop push button station.
Additional Information:
  • Conveyor Lengths: Available in increments from 5' to 100'.
  • Weight Specifications: Detailed in the specification table for various conveyor lengths and roller centers.
See more

Catalog excerpts

MODEL 796LSZ W/SENSOR ROLLERS LINE SHAFT ZERO PRESSURE ACCUMULATOR-1

5/16 7 Conveyor shown with optional supports LINE SHAFT COUPLING CHART LINESHAFTCOUPLINGCHART Model 796LSZ is one of the most popular accumulators in the unit handling industry. This zero pressure line shaft driven accumulator is ideal for numerous light to medium duty applications. Curves, spurs and other line shaft modules may be driven by a SINGLE drive. MOTOR DRIVE: > TYPE "A" TYPE"A" 1/3 HP, 230/460/3,60 cycle, ODP right angle gear motor. > TYPE "B" TYPE"B" SENSOR ROLLER ROLLER CHAIN: Drive shaft is driven byNo. 50 chain. Chain take-up provided on motor base. BEARINGS: All bearings are precision,lubricated, ball bearing units with composite housings. CAPACITY: > TYPE "C" TYPE"C" See technical section forload capacity rating. > TYPE "D" TYPE"D" ZONE DRIVE ROLLERTREAD ROLLER BED: 7" x 1-1/2" x 12 ga. formed steelchannel frame. Bed sections attached with splice plates and floor supports. > Conveyor Shown with Optional Supports ELECTRICAL CONTROLS: > HP @"A" MAX.60 FPM Optional. FRL: Unit is provided with filter, regulator, lubricator with 1/4"ports. > 1/3, 1/221"3/4, 122"1-1/2, 223" PNEUMATIC ACTUATION: Maximum airline pressure should not exceed 30 PSI. SPECIFICATIONS TREADROLLERS: 1.9" dia. x 16 ga.steel, model 196S grooved. DRIVE BELT: 3/16" dia., polyurethanebelts. Nominal 15 lbs. per roller drive. DRIVE SHAFT: 1" dia. C1018 cold rolledsteel shaft. COUPLINGS: CENTER DRIVE: Couplings located bothends (type "A"), one end only (type "B" or "C") or none (type "D"). See 'line shaft coupling chart' and specify. Located approximately16-1/2" from end of bed section on 4" RC; 18" on 3" and 6" RC. SPEED: 60 FPM, constant. ACCUMULATION ZONE: 2'-0" zonelength, pneumatically actuated, zone singulation operation. >

 Open the catalog to page 1

All Roach conveyor catalogs and technical brochures

  1. Primo Sort
    Primo Sort

    1  Page

  2. MODEL HSS2 HIGH SPEED SORTER
    MODEL HSS2 HIGH SPEED SORTER

    1  Page

  3. MODEL WT3 90° 3-STRAND SKATE WHEEL TRANSFER
    MODEL WT3 90° 3-STRAND SKATE WHEEL TRANSFER

    1  Page

  4. 3-STRAND 90° ROUND BELT TRANSFER
    3-STRAND 90° ROUND BELT TRANSFER

    1  Page

  5. MODEL CD280 2-STRAND CHAIN DRAG CONVEYOR
    MODEL CD280 2-STRAND CHAIN DRAG CONVEYOR

    1  Page

  6. MODEL 254TCDLRC MEDIUM DUTY TAPERED ROLLER CHAIN DRIVEN LIVE ROLLER CURVE
    MODEL 254TCDLRC MEDIUM DUTY TAPERED ROLLER CHAIN DRIVEN LIVE ROLLER CURVE

    1  Page

  7. MODEL 751RB HEAVY DUTY ROLLER BED BELT CONVEYOR
    MODEL 751RB HEAVY DUTY ROLLER BED BELT CONVEYOR

    2  Pages

  8. MODEL Sza251CDA heaVY dutY CHAIN DRIVEN ZERO PRESSURE ACCUMULATOR
    MODEL Sza251CDA heaVY dutY CHAIN DRIVEN ZERO PRESSURE ACCUMULATOR

    2  Pages

  9. MODEL 196ZPA MEDIUM DUTY ZERO PRESSURE LIVE ROLLER ACCUMULATOR
    MODEL 196ZPA MEDIUM DUTY ZERO PRESSURE LIVE ROLLER ACCUMULATOR

    2  Pages

  10. MODEL SZ251ZPA SMART ZONE® HEAVY DUTY ZERO PRESSURE ACCUMULATOR
    MODEL SZ251ZPA SMART ZONE® HEAVY DUTY ZERO PRESSURE ACCUMULATOR

    2  Pages

  11. flexible belt conveyor
    flexible belt conveyor

    2  Pages

  12. MODEL HD1200PB SERIES 1200 HEAVY DUTY PLASTIC BELT CONVEYOR
    MODEL HD1200PB SERIES 1200 HEAVY DUTY PLASTIC BELT CONVEYOR

    1  Page

  13. MODEL 700FFT SERIES 900 FLAT FRICTION TOP PLASTIC BELT CONVEYOR
    MODEL 700FFT SERIES 900 FLAT FRICTION TOP PLASTIC BELT CONVEYOR

    1  Page

Archived catalogs

  1. General Products Catalog
    General Products Catalog

    74  Pages

  2. General Products Catalog GP 1101
    General Products Catalog GP 1101

    148  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.