• Tread Rollers: 2-1/2" to 1-11/16" diameter, 14 gauge steel tapered rollers, model 254T with sprockets.
• Chain Drive: Roller to roller with No. 60 circular roller chain.
• End Drive: Reversible drive, side mounted or underside, with main drive roller supported by precision, heavy-duty, lubricated ball bearing units.
• Roller Centers: 6" RC measured at the outside radius of the curve.
• Chain Guard: Enclosed chain drive along the entire length of the conveyor.
• Bearings: Removable, heavy-duty, zinc plated, grease packed, labyrinth sealed.
• Motor Drive: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• Bed: 6" x 1-1/2" x 10 ga. and 4" x 1-1/2" x 10 ga. formed steel channel frame.
• Speed: 45 FPM, constant.
• Drive Location: Located on the outside of the curve, specify right or left hand drive.
• Electrical Controls: Optional.

This is a medium duty tapered roller chain driven live roller curve designed for transporting medium duty loads such as castings, drums, or pallet loads. It maintains the orientation of pallet loads during transport.

• Speed: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Capacity changes with speed, with a maximum of 100 FPM with roller-to-roller chain drive.
• Motors: Available up to 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
• Floor Supports: Supports, knee braces, casters, ceiling hangers, and polytier supports available.
• Electrical Controls: Magnetic or manual starter, limit switch, and others available.

Specify model number as 254TCDLRC-(between frames)-(degree)-(left or right).