Rapidclimb Formwork
6Pages

{{requestButtons}}

Catalog excerpts

Rapidclimb Formwork - 1

Rapidclimb Formwork - Benefits: Safer Working Conditions. Quicker Concrete Cycles Easier Erection and Dismantling RAPIDCLIMB

Open the catalog to page 1
Rapidclimb Formwork - 2

No tripping hazard on the working platform - the decking beams can be at the same level as the top of the climbing bracket. Rack and Pinion activation mechanisim is operated from a comfortable position to one side of the bracket. There is a wedge locking device which secures the position of the shutter when formwork is stationary. Rapidclimb Formwork For vertical loads of up to 30kN Climbing Brackets connect to the wall with recoverable anchor screws - no lost parts. For higher loads an anchor cone and lost plate are used. Simple lateral adjustment of the form relative to platform by way of...

Open the catalog to page 2
Rapidclimb Formwork - 3

2400mm wide working platform with no gaps so loose tools are contained safely. Close fitted edge protection using RMD Kwikform Ultraguard which can be extended to the full height of the form if required. Corner platforms neatly abutt one-another. Robust galvanised climbing bracket 45kN max vertical capacity. Integral vertical adjustment jack for fine levelling of shutter relative to platform. 750mm working space on inside of formwork when retracted. Integral hinge allows shutter to incline relative to the platform. 750mm Platform and form are crane handled as a single element System...

Open the catalog to page 3
Rapidclimb Formwork - 4

C O M P O N E N T S Rapidclimb Suspension Tubes Code Description Weight (Kg) RCX10026 Suspension tube 1.0m 5.08 RCX10027 Suspension tube 1.5m 6.84 RCX10028 Suspension tube 2.0m 9.46 RCX10029 Suspension tube 2.5m 11.64 RCX10024 Suspension Access Transom 10.29 RCX10018 Offset Hanging Adapter 1.98 Rapidclimb Frame Code Description Weight (Kg) RCX10003 Rapidclimb Bracket Assembly 163.9 Rapidclimb Guard Rail Code Description Weight (Kg) SAX11200 Ultraguard Post 1.2m 2.2 SAX10005 Ultraguard Aluminium Beam Bracket 4.2 SAX12550 Ultraguard Barrier 2550 17.3 Rapidclimb Ratchet Code Description Weight...

Open the catalog to page 4
Rapidclimb Formwork - 5

T E C H N I C A L D A T A Maximum Permissable Spacings for Rapidclimb Bracket The charts are based on the arrangement shown left and Uk wind pressures in accordance with BS6399, for a maximum height above ground of 50m and a pressure co-effecient Cp=1.5 for ratio’s of 1< L <2. Where L is the length of the individual form and H is the height of the individual form. For arrangements other than above please contact RMD Kwikform Engineering Office. H Rapidclimb 45kN Anchor 1.5kN/m2 0.75kN/m2 0.75kN/m2 H 2400 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 3000 3600 4200 4800 5400 Vb=20m/s Vb=22m/s Vb=24m/s...

Open the catalog to page 5
Rapidclimb Formwork - 6

www.rmdkwikform.com A member of Interserve Plc. Rapidclimb - Issued January 2010 Our policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, design, weight, dimension or code without prior notice being given. The arrangements of equipment shown in photographs may have been assembled by others and therefore not reflect current best working practices or legislation requirements Australia RMD (Australia) Pty. Ltd. PO Box 169, Melrose Park, South Australia, 5039. Tel: +61 8 8179 8200 Fax: +61 8 8179 8201 Email: rmd.australia@rmdformwork.com Hong...

Open the catalog to page 6

All Altrad RMD Kwikform catalogs and technical brochures

  1. Megashor

    11 Pages

  2. Ultraguard

    11 Pages

  3. Maxima

    22 Pages

  4. GTX Beams

    10 Pages

  5. Ascent-F

    17 Pages

  6. Rapid climb

    11 Pages

  7. Rapidshor

    13 Pages

  8. Trapeze

    13 Pages

  9. Superslim

    18 Pages

  10. Rapid Bar Tie

    13 Pages

  11. minima

    17 Pages

  12. Alshor Plus

    15 Pages

  13. Airodek

    14 Pages

  14. reflex

    4 Pages

  15. GTX brochure

    6 Pages

  16. Ascent-S

    16 Pages

Archived catalogs

  1. Alshor plus

    10 Pages

  2. Airodek

    16 Pages

  3. Ascent F

    16 Pages

  4. megashor

    10 Pages

  5. Minima Panels

    10 Pages

  6. Maxima Panels

    16 Pages