FS-8500 Freeze Substitution System
2Pages

{{requestButtons}}

Catalog excerpts

FS-8500 Freeze Substitution System - 1

Computer-controlled, for reliable and repeatable results. F E AT U R E S ♦ Unlimited capability for storing protocols and reports ♦ Additional temperature sensor provided to measure sample temperature in a reagent vial during Freeze Substitution run. UV LED Lamp The FS-8500 Freeze Substitution System is designed with safety & operator convenience in mind. With a large volume, easy access, top loading, temperature controlled substitution chamber samples are slowly and gently dehydrated in a solvent solution, following which they are embedded in resin blocks for room temperature sectioning. Cryofixed samples, typically stored in LN2, are transferred into the FS-8500 where the substitution solvent is preprogrammed to a temperature below that where secondary ice crystal growth can occur. The FS-8500 uses liquid nitrogen as a coolant to achieve a base operating temperature of –140C (133K) which is well below the ice recrystallization temperature in any biological structure. The temperature of the substitution chamber is set & regulated by the included laptop computer to an accuracy of better than +/- 0.5C over the range from -140C to +50C. The FS-8500 is a free standing, caster wheel mounted, system with a large, stainless steel worktop mounted to its 50 liter low-loss LN2 Dewar. The temperature controlled substitution chamber is conveniently located in the center of the worktop for easy access. The chamber is provided with a viewing port/ cover, which is removed to gain access into the substitution workspace. As it is removed, the ventilation system is automatically turned on to extract fumes and the chamber internal illumination is turned on. ♦ Low-loss LN2 Dewar can be refilled during a substitution run ♦ Internal illumination of substitution work chamber automatically activated when chamber cover removed ♦ Specimen agitation ♦ Cryo transfer tool provided to safely & conveniently remove cold sample holders These features combine to make the FS-8500 an extremely convenient to use and versatile Freeze Substitution System. 4650 S. Butterfield Drive • Tucson, Arizona 85714 USA Phone: 520.745.0001 • Fax: 520.745.0004 • E-mail: info@boeckeler.com • www.boeckeler.com © 2012 Boeckeler Instruments, Inc. Boeckeler is a registered trademark of Boeckeler Instruments, Inc., Tucson, Arizona. All other trademarks are the property of their respective owners. All specifications subject to change without notice.

Open the catalog to page 1
FS-8500 Freeze Substitution System - 2

S P E C I F I C AT I O N S Supplied complete with a low-loss 50 liter LN2 Dewar, stainless steel work table, laptop computer, Large Top-access Substitution Chamber with built-in illumination, exhaust fan and removable cover, Universal Specimen Holder Cup (400907), Inverted Polymerization Holder Cup (400915), Transfer Tool (400920), UV Polymerization Lamp. Dimensions Work table: 26 inches (660 mm) x 26 inches (660 mm) Height: 31 inches above floor (790 mm) Weight (empty) Power Requirements 50 Liter LN2 capacity low-loss stainless steel, mounted on caster wheels Temp Range System Components:...

Open the catalog to page 2

All RMC Products catalogs and technical brochures

  1. Jeol JFD-V

    2 Pages

  2. GKM2 3-fold

    2 Pages

  3. GKM2

    2 Pages

  4. AFM-990

    2 Pages

  5. 60617-SR

    2 Pages

  6. GKM-2

    2 Pages

  7. EMP-5160

    2 Pages

  8. QG-3100

    2 Pages

  9. HPM 010

    2 Pages

  10. ATUMtome

    3 Pages

  11. CR-X Flyer

    1 Pages