EMP-5160

EMP-5160

EMP-5160

Product catalog summary
Overview
The EMP-5160 Tissue Processor by Boeckeler Instruments is designed for resin processing of light and electron microscopy specimens. It automates the embedding process, enhancing productivity in electron microscopy laboratories.

Features
  • Unique Program Key System for easy programmability.
  • Complete system of specimen baskets with capped reagent vials for safety.
  • Programmable agitation and temperature control.
  • High specimen capacity with up to 50 program memory.
  • Two battery backup systems for uninterrupted operation.

Specifications
  • Supports up to 50 programs with unlimited delay start.
  • Specimen agitation and temperature control via Peltier Controller.
  • Built-in diagnostic codes and air-cooled system.
  • Three types of specimen holders for various sample sizes.
  • Capacity for 48 specimens in four-compartment baskets, 18 in three-compartment baskets, 72 electron microscopy grids, or 12 large specimens in stack ring holders.
  • Two battery backup systems: lithium for ROM protection and rechargeable for up to 30 minutes of operation.
  • Program step range from 1 minute to 99 hours 59 minutes.
  • Specimen drip process to prevent air drying.
  • Dimensions: 457 mm x 305 mm x 533.4 mm (18” x 12” x 21”).
  • Weight: 25 kg (55 lbs).
  • Voltage: 100/120/220/240 volts, 50/60 Hz.
  • Power consumption: 500 W.

Conclusion
The EMP-5160 is a robust and efficient tool for laboratories requiring frequent specimen processing, offering safety, programmability, and high capacity.
See more

Catalog excerpts

EMP-5160-1

F E AT U R E S ♦ Unique Program Key System ♦ Complete System of Specimen Baskets ♦ Capped Reagent Vials ♦ Programmable Agitation ♦ Keypad for User Programmability ♦ Highest Specimen Capacity Available The EMP-5160. . .the advanced design for resin processing of light and electron microscopy specimens. ♦ 50 Program Memory ♦ Two Battery Backup Systems The EMP 5160 is a productivity tool for the Electron Microscopy Laboratory. If you are embedding three or more times per week you cannot afford to process by hand. The EMP 5160 uses a proven robotics system to move baskets of tissue from one vial to another and agitates at the time and force that you program, at the temperature you desire. ♦ Microprocessor based with room for 50 protocols built into the instrument. These can be preprogrammed for you, sent to you on preprogrammed keys later or put into the unit or keys by the operator with the hand held programming unit. ♦ Sealed Vials for operator safety, the vials can all be loaded in a hood and the EMP5160 operated in an open room. Transfer of the vials does not expose the operator to fumes as other units do. ♦ Programming is done via hand held keypad. ♦ Frugal! Can use just a couple of milliliters of fluid for one sample up to 18ml for a full load (up to 48 sample compartments). ♦ Two proven sample handling systems, either the traditional snap rings with removable screens or the multicompartment baskets. Either type have all tools included. 4650 S. Butterfield Drive • Tucson, Arizona 85714 USA Phone: 520.745.0001 • Fax: 520.745.0004 • E-mail: [email protected] • www.rmcboeckeler.com © 2015 Boeckeler Instruments, Inc. Boeckeler is a registered trademark of Boeckeler Instruments, Inc., Tucson, Arizona. All other trademarks are the property of their respective owners. All specifications subject to change without notice.

 Open the catalog to page 1
EMP-5160-2

Number of Programs 50 Delay Start Unlimited Specimen Agitation Yes Specimen Temp. Diagnostic Codes Built-in Coolant Specimen holders Three types are offered: A) Molded plastic with three or four specimen compartments per basket. B) Electron microscopy specimen grid baskets for staining, spec grids/ baskets. C) Single compartment specimen stack rings for larger samples. Specimen Capacity 48 Specimens in four compartment baskets 18 Specimens in three compartment baskets 72 Electron microscopy grids in grid baskets 12 Large specimens in stack ring holders Battery Backup Two battery backup systems:...

 Open the catalog to page 2

All RMC Products catalogs and technical brochures

  1. Jeol JFD-V

    2  Pages

  2. GKM2 3-fold

    2  Pages

  3. GKM2

    2  Pages

  4. CR-X Ultracut

    2  Pages

  5. AFM-990

    2  Pages

  6. 60617-SR

    2  Pages

  7. GKM-2

    2  Pages

  8. QG-3100

    2  Pages

  9. HPM 010

    2  Pages

  10. ATUMtome

    3  Pages

  11. RMC Line Card

    2  Pages

  12. CR-X Flyer

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.