neoTower® 8.0, 9.5, 11.0, 12.5 NG
3Pages

Technical datasheet neoTower® 8.0, 9.5, 11.0, 12.5 NG Product designation Rated output - thermal (2) Power modulation - electrical Power modulation - thermal Liquefied Petroleum gas input Liquefied Petroleum gas input Rated output - electrical CHP coefficient f Primary energy factor Sound power level LwA Maintenance interval ErP energy efficiency label Sound pressure level LpA Efficiency ratios Electrical efficiency ratio ƞel Thermal efficiency ratio ƞth Total efficiency ratio ƞtotal Return flow temperature ± 5 °C min./max. ambient temperature Pressure rating - water side Nominal voltage Nominal effective power PnG Heat extraction Electrical energy generation Cos φ uncompensated Reactive power compensation Number of steps Degree of choking or resonance frequency (6) Rated alternating current Ir Rated alternating current Ir cos φ 1 Rated apparent power SrE Short-circuit alternating current Alternator Ik" Grid short circuit power with UnG Sk“ Start-up current lk approx. Motor Motor manufacturer Air-fuel ratio λ Engine oil - RMB/ENGINE Oil RMB/ENERGIE GmbH • Hauptstraße 543a • 26683 Saterland • Tel.: +49 4498 92288-0 • Fax: +49 4498 92288-66 info@rmbenergie.com • www.rmbenergie.com •

Technical datasheet neoTower® 8.0, 9.5, 11.0, 12.5 NG Product designation Generator Generator manufacturer Generator type Motor start-up Supply and exhaust air Combustion air requirement Module ventilation flow rate Total air requirement of module (7) min./max. intake air temperature Min. cross section without hydraulic resistance Flue gas mass flow rate - damp Permissible counter-pressure of exhaust air system max. Flue gas volume flow - dry Delivery pressure flue gas max. Delivery pressure flue gas cascades max. Delivery pressure max. for flue gas and exhaust air combination Weight...

Product designation Fully equipped for seamless CHP unit operation with all necessary measurement and control equipment in bivalent operation. Dimensions control cabinet 600x600x200 mm; Approx. weight: 30-33 kg Connection cable CHP control cabinet standard 3m Control cabinet Supply line to control cabinet: 5x6mm² Cu up to max. 50m (fuse 32 A slow blow) max. terminal area 16mm² Electrical connections Temperature sensor cable: min. 2-08 JY(ST)Y up to 15 m length (2x1,5 mm² up to 40 m length) Control cables pump: 3x1,5 mm²; RJ45 Patch cable in CHP connector Fixed compensation without reactors...