Beacon 200 data sheet
2Pages

TWO CHANNEL WALL MOUNT CONTROLLER Beacon™ 200 Model Simultaneous readout on 2 channels Two alarm levels per channel D iscrete and common relays Built in audible alarm NEMA 4X enclosure 4-20 mA outputs Proven, long-life sensors for a wide variety of gases Accepts any 4-20 mA transmitter input (24 VDC) Easy to install, operate and expand CSA, C/US classified Industry Applications Affordable 2 Point Monitor Petrochemical plants Refineries Water & wastewater treatment plants Pulp & paper mills Gas, telephone, & electric utilities Parking garages Manufacturing facilities Steel Automotive HVAC The Beacon 200 is a powerful, low cost fixed system controller for two points of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry’s most economical two point controller. It is capable of connecting directly to RKI sensors for LEL level combustibles, oxygen, CO2 and toxic gas sensors. The Beacon 200 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beacon 200 housing, or can be wired remotely from the controller. The 10 amp rated relays are strong enough to actuate most external alarms and horns without using slave relays. The digital display has backlighting and simultaneous readout of the gas type and concentration. The Beacon 200’s housing is rated NEMA 4X for corrosion resistance and a weather tight seal, and complies with lock out / tag out standards. An external reset switch allows the alarm to be silenced from outside of the controller housing. The Beacon 200 comes complete with a wall mounting kit for easy installation. RKI offers the industry’s widest selection of standard and toxic gas detection sensors, which can be utilized with the Beacon 200, providing gas monitoring protection for almost any application. RKI Instruments, Inc. • 33248 Central Ave. Union City, CA 94587 • Phone (800) 754-5165 • (510) 441-5656 • Fax (510) 441-5650 World Leader In Gas Detection & Sensor Technology www.rkiinstruments.com

Beacon™ 200 Model Physical Dimensions Wall mounting grey polycarbonate with hinged cover Conduit Connection 3/4” NPT conduit hubs, 3 provided. 2 for sensor wiring and 1 for power & relay wiring Wiring Termination Screw type terminal block, 14 gauge max Power Controls 115 VAC or 24 VDC standard, Optional 230 VAC. Battery backup option available 4 internal push buttons for setup, programming, and calibration. 1 external push button for alarm reset Operating Environment Operating Temperature Storage Temperature -4°F to 158°F (-20°C to 70°C) NEMA-4X enclosure, waterproof, chemical, and weather...