Beacon 110 data sheet
2Pages

Single Channel Wall Mount Controller Beacon™ 110 Model Low cost versatile solution Compact, weatherproof, NEMA 4X enclosure 115/220 VAC or 24 VDC operation Long life sensors (2+ years typical) Accepts RKI LEL/O2/CO2/toxic direct connect sensors Accepts any 4-20 mA transmitter Audible alarm with reset button Two programmable alarm levels Built-in trouble alarm with relay Relay rating 10 amps, form C Provides 4-20 mA output Optional Strobe Industry Applications • Petrochemical plants • Refineries • Water & wastewater treatment plants • Pulp & paper mills • Gas, telephone, & electric utilities • Parking garages • Manufacturing facilities • Steel • Automotive • HVAC Gas detection should not be complicated. The Beacon 110 is gas detection simplified. The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, simple to install and operate, and priced to be the industry’s best value single gas detection controller. It is capable of accepting RKI sensors directly for LEL level combustibles, oxygen, CO2, and toxic gas sensors. The Beacon 110 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller. The 10 amp rated relay contacts allow direct control of external alarms and horns. The digital display has backlighting and simultaneous readout of the gas type and concentration. The Beacon 110 is also housed in a NEMA 4X rated case for a weather tight seal. This case design complies with lock out / tag out standards and can be fully secured. An external reset switch allows the alarm to be silenced from outside of the controller housing. The Beacon 110 ships complete with a wall mounting kit for easy installation. RKI offers the industry’s widest selection of standard and toxic gas detection sensors, all of which can be utilized with the Beacon 110, providing gas monitoring protection for almost any application. RKI Instruments, Inc. • 33248 Central Ave. Union City, CA 94587 • Phone (800) 754-5165 • (510) 441-5656 • Fax (510) 441-5650 World Leader In Gas Detection & Sensor Technology www.rkiinstruments.com

Beacon™ 110 Model Physical Dimensions Wall mounting grey fiberglass with hinged cover Conduit Connection 3/4” NPT conduit hubs, 2 provided. 1 for sensor wiring and 1 for power & relay wiring Wiring Termination Screw type terminal block, 14 gauge max. Universal 115 VAC & 220 VAC, or 24 VDC nominal, battery backup option available 3 internal push buttons for setup, programming, and calibration. 1 external push button for alarm reset. Environmental Operating Temperature Storage Temperature Enclosure Rating NEMA-4X enclosure, chemical, and weather resistant. Suitable for indoor and outdoor...