Module type Process/Temperature Controller

4CH temperature controller packed in one compact module Compact 4 CT inputs and 4ch controls in one module Width 30mm, depth 85mm (connector type : 76.9mm) compact design with 4ch control type. (Terminal type) 4ch Z-TIO module can have 4 CT (Current transformer) inputs. Digital Input/Output Module : Z-DIO (8 inputs and 8 outputs) Temperature Control Module : Z-TIO (4ch or 2ch control) (Terminal type) (Connector type) (Terminal type) (Connector ctor type) Communication Extension Module : Z-COM CT (Current transformer) Input Module : Z-CT (12 inputs) (High-speed communication gateway) (Terminal...

Advanced functions enhance multi-loop control Temperature uniformity at ramp-up (Auto-temperature rise function) The Auto-temperature rise function controls the rate of temperature rise uniformly across all the channels in a specified group. The SRZ system has the ability to have multiple groups within each system. This uniform controlled temperature rise will suppress local overheating and mechanical distortion in the tools, contributing to higher product quality. When automatic temperature rise is OFF. Zone G H When automatic temperature rise is ON Zone A to I Zone G wait Zone H wait Zone D...

CommunicationProgramless connection to PLCs (Temperature control module with PLC communication: Z-TIO-C/D) Z-TIO-C/D Programless connection I yaY 16 units Corresponding to MITSUBISHI MELSEC PLC series : 1. A compatible, 1C frame (type 4). AnA/AnU common command (QR/QW) (ANA/QNA series, Q series) QnA compatible, 3C frame (type 4), command (0401/1401). (QnA/Q series) 12 ZR register only 2. A compatible, 1C frame (type 4). ACPU common command (WR/WW) Open Network Connectivity CC-Link : Communication converter COM-MC Ethen <et/IP EtherCAT.^MODBUS/TCP EthernetCC-Link • Available module : Z-TIO-A/Z-TIO-B,...

Display Unit Operation Panel : OPC-TS2060 pera ation a tion panel pane ell e 5.7 inches TFT color LCD operation TIO Monitor TIO Monitor External Dimension Message Event alarm is “ON” Display : TFT color LCD Power supply voltage : 24V DC Power consumption : Less than 13W Ambient temperature : 0 to 50°C Ambient humidity : Less than 85% RH Waterproof/Dustproof : IP65 Weight : 580g Compliance : UL, cUL, CE marking Com m Panel Cutout 1 50 50.0 0.0 0 Sett Menu Moni tor ing Communication with a PC via USB port (Loader communication) Easy parameter setup via USB loader port with PROTEM2 software (Loader...

Input Universal input Multi-Memory Area (recipe) % SpecificationsTemperature Control Module (Z-TIO) Number of inputs 4 or 2 channel (Isolated between inputs) a) Temperature, Current, Low voltage input group Thermocouple : K, J, E, T, R, S, B, N (JIS/IEC) Low voltage (Input impedance : More than 1MQ) 0 to 1V DC, 0 to 100mV, 0 to 10mV DC Current (Input impedance : 50Q) b) High voltage input group High voltage (Input impedance : 1MQ) • Available for feedback resistance input Sampling time : 0.25sec Influence of external resistance : 0.125|iV/Q (Thermocouple input) Influence of lead resistance :...

Digital Input Input Number of inputs : 8 points • Isolated input (4 points/common) Input method Voltage contact input Open : Less than 5.0V, Close : More than 17.5V Contact current : Less than 3.0mA Allowable input voltage : Less than 26.4V DC Function : Interlock reset, RUN/STOP, Remote/Local, Auto/Manual, Memory area selection, External disturbance suppression Function allocation : See digital input allocation table Number of inputs : 12 points CT type and Input range CTL-6-P-Z : 0.0 to 10.0A CTL-12-S56-10L-N : 0.0 to 100.0A Sampling cycle : 3 sec Input accuracy : Digital Output Event (Alarm)...

Model and Suffix Code T.A ■> /"'if used as a heat and cool module or position ’N l 4ch type Temperature Control Module (Z-TIO-A/C)^ proportional controllerthen it is only 2 channels. Control output Z-TIO-A (Standard type)Z-TIO-C (PLC special protocol : MAPMAN) Hardware coding Quick start code_ Input/Output configuration (Heat/Cool PID control or Position proportional PID control) Wiring method Terminal type Connector type Position proportional PID control without FBR 2ch heat/cool PID control (Z-TIO-A) • No CH3 and CH4 for 1CH control type (Z-TIO-B). No quick start code (Default setting) Quick...

DO1 to 4 Allocation Table Code DO5 to 8 Allocation Table Code • Area setting is set to disat>led at toe facto>ry. Operation mode 1 : Only monitoring. (Control stop, Event function OFF) • EDS function : External disturbance suppression function Operation mode 2 : Monitoring and Event function (Control stop) Standard accessory , Connector cover Model : KSRZ-517A Power supply terminal cover Model : KSRZ-518A CT (Current transformer) Input Module (Z-CT) Communication Module (Z-COM-A) Specifications

[ Access°ries] Operation Panel (OPC-TS2060) Compact setting display unit (OP10) # Accessories Communication cables Z-COM * Other types of cables such as cable with 9-pin D-SUB connector are also available. w-BF-02-1000 yCTermination resistor connect°D ^Terminal Cover Joint connector^(For power supply) cover 6 pins Current transformer for heater break alarm _(HBA)_ End plates Model : DEP-01

Temperature Control Module (Z-TIO) Terminal type CT4 Input CT *1 r n (2) Voltage pulse/Voltage/ Current/Open collector 3 • For 2CH specifications, connectors CN3 and CN4 are not mounted. 1 CT : Current transformer for heater break alarm Feedback resistance input is used only for monitoring. <Caution> Voltage / current outputs are not isolated from the power supply voltage. CT : Current transformer for heater break alarm Feedback resistance input is used only for monitoring. <Caution> Voltage / current outputs are not isolated from the Temperature Control Module (Z-TIO) Connector type Communication...

• MODBUS/TCP Communication Converter : COM-ME-1 • CC-Link communication converter (COM-MC) *1 : If factory setting is not specified, the followings are set as default. - Host communication protocol : RKC Communication. • EtherNet/IP Communication Converter : COM-ME-2 *1 : If factory setting is not specified, the followings are set as default. - Host communication protocol : RKC Communication. • USB communication converter (COM-KG) # EtherCAT Communication Converter : COM-ME-3 *1 : If factory setting is not specified, the followings are set as default. - Host communication protocol : RKC Communication....