Process/Temperature Controller RoHS compliant Reinforced Insulation

Digital Temperature Controller RB SERIES Reinforced Insulation RoHS compliant Easy-to-read with large 11-segment LCD display Panel space saving : 60mm depth So bright and so large it is easy to read from a greater distance. The RB Series has very short depth. The series was designed with a mounting bracket that allows close horizontal mounting of as many as six units. * RB100 : 63mm depth RKC's conventional temperature controller (Actual size) In the factory default state, only one set value, SV1, can be stored. (It is possible to change to a 4-SV specification.) Four set values can be stored...

High Performance Budget Friendly Temperature Controller Save space and save money with a new series that gives outstanding control capability and comprehensive functions incorporated into a slim body case. Calculates optimum PID values to stabilize control faster than ever The improved autotuning algorithm calculates optimum PID values that shortens the time to reach stable control at the set value as well as eliminating overshoot/undershoot. The new PID algorithm also suppress overshoot/undershoot against external disturbance. Sensor input The RB high performance controller provides precise...

Measuring accijracy See measuring accuracy code table_ Influence of ambient Temperature input : ±0.06°C/°C [at 5 to 40°C] temperature_Voltage/Current input group : ±0.06% of span/°C [at 5 to 40°C] Insulation resistance More than 20MQ (500V DC) between measured terminals and ground More than 20MQ (500V DC) between power terminals and _ground____ Dielectric voltage 1000V AC for 1 minute between measured terminals and ground 1500V AC for 1 minute between power terminals and ground Protocol_ANSI X3.28 sub-category 2.5A4 (RKC standard) • Measuring accuracy table *1 : Accuracy is not guaranteed for...

^■Event (A|arm) (Optional) Event type Other functions Loop break alarm (LBA) Heater break alarm (HBA) ^Specifications^ (SjjWaterproof/Dustproof (Optional) (RB100 : Up to 3 points, Heat/Cool type : Up to 2 points) See page 7 "Maximum number of digital outputs (DO) by combinations of output (OUT1 and OUT2)_ Process high, Process low, Deviation high, Deviation low, Deviation high/low*1, Band, Set value high, Set value low, LBA (Control loop break alarm), Heater break alarm (HBA), Output of the communication monitoring result, *1: Two types of alarm settings are field-selectable. 1. Independent high...

( |_| : Represents selection of digital outputs *1 When the instrument has two digital outputs (DO1 and DO2) and no OUT2 output, "V" type output (load: 40mA) can be specified for OUT1.

Quick start code • Quick start code tells the factory to ship with each parameter preset to the values detailed as specified by the customer. Quick start code is not necessarily specified when ordering, unless the preset is requested. These parameters are software selectable items and can be re-programmed in the field via the manual. • Event Code Table (Programmable) Digital output 1 (DO1) (Event 1 type) Digital output 2 (DO2) (Event 2 type) Digital output 3 (DO3) (Event 3 type) *1 Digital output 4 (DO4) (Event 4 type) *2 Quick start code ( See event code table ) See event code table ( See event...

* Use a solderless terminal for screw size M3, width 5.8mm or less. RB400/500/900 RB900 (Optional) Digital output 1, 2 (DO1,2) Relay contact output Measuring input Printed in Japan : SEP2021 OBB8H(J) All Rights Reserved.