*mydirectindustry

AG500

Product catalog summary

AG500 Digital Panel Indicator
General Description: The AG500 is a compact digital panel indicator with a 60mm depth in a 1/8 DIN case, featuring a bright 21mm high LED display with a five-digit readout.
Features: It supports universal input types, up to six programmable alarms, analog retransmission, digital input capabilities, and optional sensor power supply. Communication options include RS-485 or MODBUS-RTU.
Specifications: The device supports various input types, offers high accuracy, and features a sampling time of 0.25 seconds. It complies with CE, UL/c-UL, and RCM standards, with IP66 protection from the front panel.
Alarms: Configurable up to six alarm outputs with hold and interlock functions.
Additional Functions: Includes peak and bottom hold functions, PV bias, and PV ratio adjustments.

VGR-B100 Paperless Recorder
General Description: A paperless recorder with a touch screen interface, supporting universal inputs and Ethernet communication.
Features: Includes a 5.7-inch LCD touch screen, data export to SD card, and real-time/historical trend displays.
Specifications: Supports 3 to 12 input points, with a 5.7-inch TFT color LCD display. Offers Ethernet and optional RS-485 communication.
Optional Functions: RS-485 communication, digital inputs/outputs, and relay contact outputs.
Compliance: CE marking compliant with EMC and LVD standards.

Thermocouples and Resin Pressure Sensors
Specifications: Details on thermocouple types, coatings, and model codes. Maximum operating temperatures for fluorine resin and ceramic coatings are 300°C and 500°C, respectively.
Procedures: Guidelines for using adhesive tapes with thermocouples and selecting appropriate lengths.
Standards and Norms: Conforms to JIS class 2 standards.
Recommendations: Proper mounting to prevent sensor damage and avoid using magnetic sensors near sensitive items.

Power Controller THV-10 and THV-A1 Series
General Description: Designed for controlling electrical loads with features like phase-angle and zero-cross control.
Features: Offers various control modes, digital communication, and heater break detection.
Specifications: Supports load currents from 20A to 200A AC, with selectable control methods.
Safety and Compliance: Complies with UL, cUL, and CE standards.
Additional Functions: Includes ramp functions for soft-start and soft-down, and event inputs for external function switching.

Communication Specifications
Host Communication: Utilizes RS-485 interface with various speeds and protocols.
Loader Communication: Requires a USB converter with a communication speed of 38400 bps.
Ethernet Communication: Supports MODBUS/TCP, EtherNet/IP, and EtherCAT.
CC-Link Communication: Supports communication speeds up to 10 Mbps.
Compliance and Standards: Complies with UL61010-1, CAN/CSA-C22.2 No. 61010-1, EN61010-1, EN61326-1, and RoHS standards.

Control Theory and PID Settings
Overview: Focuses on PID control systems and their applications in temperature regulation.
PID Control and Autotuning: Explains the Brilliant PID system and autotuning methods.
Alarm Functions: Details various alarm functions for safety and operational efficiency.
Memory and Remote Setting Functions: Describes memory area function and remote setting capabilities.
Serial Communication and Protocols: Highlights serial communication standards and protocols used.

Catalog excerpts

Panel Mounting Type Indicator General Description The AG500 is a digital indicator in a panel saving 60mm depth 1/8 DIN case. The 21mm high LED readout has a luminance double that of conventional indicators and the easy-to-read five digit display. The options available for the AG500 include universal input types, up to six programmable alarms, analog retransmission, digital input, 12 or 24 V DC sensor power supply and RS-485 or MODBUS-RTU communications. Features Bright, easy-to-read LED displays (21mm high) Digital communications Up to 6 alarms Analog retransmission output 12V or 24V DC sensor power supply Resolution 1/100°C is available (RTD input) 12/24V DC Sensor power supply (Optional) Sensor power supply function is available. Supply voltage can be specified from 12V DC or 24V DC. 24V DC (Max. 24mA DC) 12V DC (Max. 20mA DC) ALM1 Easy-To-Read Oversized LED Displays The easy-to-read 21mm height five-digit display can show a range up to 19999. Luminance is double that of conventional indicators. Alarm status can be checked easily with alternate displays of PV and alarm number. Sensor Example Infrared thermometers Pressure Transmitter Measured input 4 to 20mA or 1 to 5V • If 24V DC is specified, the maximum number of alarm outputs will be 2. • If 12V DC is specified, the maximum number of alarm outputs will be 5. Numerous Input and Output Options • Contact input (max. 2 points) • Alarm output (max. 6 points) • Analog retransmission output • Communication Peak/Bottom PV hold reset Alarm interlock reset Contact input 2 points PV and alarm number will be displayed alternately when the alarm is ON. (when alarm 3 is in alarm state) Alternate Analog retransmission output • Alternate display function can be set ON/OFF for each alarm (1 to 6). Panel space saving : 60mm RS-485/422A (MODBUS/RKC standard protocol) Measured value (PV) output Alarm output Depth of AG500 is only 60mm, requiring less panel space. Display function Alarm function Interlock (Latch) Function Alarm Delay Timer Hold Action Alarm energized/de-energized action selection Peak and Bottom Hold Function PV Bias an

Open the catalog to page 1

Panel Mounting Type Indicator SpecificationsInput Digital Input (Optional) Universal input a) Temperature, Current, Low voltage input group Thermocouple : K, J, R, S, B, E, T, N (JIS/IEC), PLII (NBS), •Influence of external resistance : Approx. 0.2pV/Q •Input break action : Up-scale / Down-scale (Selectable) •Influence of input lead resistance : Approx. 0.01[%/Q] of reading •Maximum 10Q per wire •Input break action : Up-scale Low voltage : 0 to 1V DC, 0 to 100mV DC, 0 to 10mV DC, -100 to +100mV DC, -10 to +10mV DC •Input break action : Up-scale / Down-scale (Selectable) Current : 4 to 20mA DC,...

Open the catalog to page 2

Panel Mounting Type Indicator AG500 Panel Mounting Type Indicator AG500 Model and Suffix Code *1 : When 12V DC ( For sensor power supply/LED drive supply) is used, alarm output is max. 5 points. *2 : When 24V DC (Sensor power supply) is used, alarm output is max. 2 points. Indicator • Recorder Range and Input Code Table Thermocouple_ RTD Alarm Code Table Code Accessory ~M Terminal cover KFB400-58

Open the catalog to page 3

Panel Mounting Type Indicator AG500 External Dimensions and Rear Terminals (Unitmm) Panel cutout (Panel thickness must be between 1 to 10mm) • Waterproof/dustproof is not available for close horizontal mounting. • Use a solderless terminal for screw size M3X6.

Open the catalog to page 4

Panel Mounting Type Indicator O General Description The AE500 is a powerful digital indicator with up to four (4) alarms. The AE500 has various options such as digital communications, analog retransmission output, waterproof, and power supply for LED drive of SP400/SP500. In combination with the input selector SP400/500, a maximum 16 points of input can be connected to one AE500. The AE500 matches the physical appearance of the CB series (CB100/ 400/ 500/700/900, CB103/403/903). Features Bright, easy-to-read LED displays (20mm high) Digital communications Up to 4 alarms tV Analog retransmission...

Open the catalog to page 5

Panel Mounting Type Indicator Specifications Input Communications_(Optional) (Optional) Number of outputs Alarm type : a) Thermocouple : K, J, R, S, B, E, T, N (JIS/IEC), PLII (NBS) •Influence of external resistance : Approx. 0.2|iV/Q •Input break action : Up-scale (Alarm output is ON.) •Influence of input lead resistance : Approx. 0.01[%/Q] of reading •Maximum 10Q per wire •Input break action : Up-scale (Alarm output is ON.) •Input short circuit action : Down scale (Alarm output is ON.) •Input break action : Down-scale (Alarm output is ON.) When "0 to 5V" input, value around zero. •For DC current...

Open the catalog to page 6

Panel Mounting Type Indicator AE500 Panel Mounting Type Indicator AE500 Model and Suffix Code Specifications Indicator • Recorder Range and Input Code Table } Thermocouple (Field-programmable) 1 Specify Z-1010 when ordering. Alarm Code Table Accessory Code Shunt resistor for DC current input KD100-55 SP500 Model and Suffix Code SP500 input selector unit Input type : Link method : Life of switch : Contact resistance : Switching timing : Switching force : Thermocouple K,J,E,T,R,S,B,N (JIS/IEC), U,L (DIN) Voltage, current inputs 0 to 5V DC, 1 to 5V DC, 0 to 20mA DC, 4 to 20mA DC 6 points 5 points...

Open the catalog to page 7

Panel Mounting Type Indicator < Without transfer switch less type > Panel cutout for closely contacted mounting

Open the catalog to page 8

DP-350C*A 手軽にやさしく温度測定！特長 ● 持ちやすく操作しやすいデザイン ● 0.1℃/1℃表示切換 ● 測定値の最大値／最小値を記憶 DP-350C*A 主な機能測定値ホールド機能 HOLDキーを押すとその時点の温度を継続して表示します。HOLD の解除もワンタッチで行えます。より正確な温度計測をするために、バッテリーアラーム機能を搭載しています。表示部にBAT記号が表示された

Open the catalog to page 9

Handheld Digital Thermometer Model Code * Purchase of each cover only is available. Refer to the following part numbers: 350P-K01: Anti-shock cover (Silicon jacket) 350P-K02: Hard carrying case 350P-K03: Soft case Hard carrying case Temperature Sensors (Type K Thermocouple) ® 400°C (D For semi-solid, viscous material and liquid Model Code : JB-150-K-50-1000-3C/F Silicone rubber cable (Green) JB-150-K-50-1000-3C/A Silicone rubber cable (Blue) © Maximum usable temperature (D Applications (Unit : mm) ST-230 Tilting Sensor Head Type *_155_ -40 to 300°C (2) For static surface Model Code : ST-230-K-1000-3C/F...

Open the catalog to page 10