A Phoenix Mecano Company The new performance class with trapezoidal- and ball screw drive

• High positioning accuracy • Uniform motion • High drive stiffness • Manual or electric drive • Occasional to multiple adjustments daily • Medium to high stability • Width, length and height adjustment

Properties/performance data (Dimensions, order numbers) Position determination

Integrated spindle clamping • Manual force locking spindle clamping optional Precise / plane mounting surface Bellows • Distortion-free installation • Protection class IP 40 Carriage with slide bushings as standard • Longer lifetime due sleeves made of high performance material • Split nuts, simple replacement - no need to dismantle the linear unit • Longer lifetime due to high performance materials Reduced axial play • Optimised lead screw with fixed bearing in end element • High moment capacity • Version available with large fixing plate • Identical connection sizes as previous version Right...

Precise / plane mounting surface • Distortion-free installation Centering holes in the guide table Various fixing possibilities at the endelement • Simple connection of accessories Carriage with ball bushing Bellows • Exceptionally long lifetime • Protection class lP 40 • Smooth running performance • Also for vertical installation position suitable • Identical connection sizes as previous version • X-version possible via connecting plate and external guide table • EPX-II 30/40 KG Right thread • EPX-II 30/40 without drive on request • Optional with bellows Options: • Standard- and long carriage...

General information / operating conditions Geometric moment of inertia

Image shows different versions of the EP(X)-II series: EPX-II 30 with righthand thread, EP-II 40 with righthand thread and EP-II 50 with right and lefthand thread Image shows an EPX in the Protect version (with bellows) RK ROSE+KRIEGER EP(X)-II 30/40/50

Technical data Calculation of the load characteristic to define the lifetime • The lifetime of linear units are in accordance with the average loads and moments of an application. The load characteristic can approximately calculated by following equation with simultaneously appearing load and moments. Load characteristic = Application values (z.B. Fy) Catalog values (z.B. Fymax) Fy My Mx Mz + + + Fz + Fymax Mymax Mxmax Mzmax Fzmax Rough calculation of the load characteristics EPX-II KG unit size larger Reduction of the app. values not possible Please contact us regarding a detailed lifetime calculation....

Travel [mm]Dynamic load dataF Force [N]M Moment [Nm]I Geometric moment of inertia [cm4] Type Geometric moment of inertia [cm4] Type

Order instructions: • Corrosion-protected units • Right or lefthand thread • Second non driven carriage available on request • Scale upon request • Other screw leads available on request Total length = basic length + travel [mm] (Minimum travel: Basic 25 mm, Protect 120 mm) 2 = Protect (For the Protect version, the stroke must be ordered longer than required by a factor of 1.5 due to the space required for installation of the bellows.) B = c/w integrated spindle clamping (Only with spindle bearing ball bearing) Spindle bearing: Spindle version:

Total length = basic length + travel Mass [kg] Basic length

• Please specify basic length • Right and lefthand thread and total travel when • Corrosion-protected units available on request • Second non driven carriage available on request • Scale upon request • Protect: version with bellows optional (IP 40) Total length = basic length + total travel [mm] (minimum total travel 50 mm) B = c/w integrated spindle clamping (Only with spindle bearing ball bearing) Spindle bearing: 1 = ball bearing 0 = slide bearing

EP-II RechtsLinks Spindel B M6 Total length = basic length + travel Basic length

Order instructions: • Please specify basic length • Split screw and total travel when • Corrosion-protected units available on request • Second non driven carriage available on request • Scale upon request • Protect: version with bellows optional (IP 40) Total length = basic length + total travel [mm] (minimum total travel 50 mm) B = c/w integrated spindle clamping

EP-II geteilte Spindel Total length = basic length + travel M6 M1 Basic length

Right or lefthand thread Order instructions: • Corrosion-protected units available on request • Second non driven carriage available on request • Scale upon request • Other screw leads available on request Total length = basic length + travel [mm] (Minimum travel: Protect 120 mm) 2 = Protect (For the Protect version, the stroke must be ordered longer than required by a factor of 1.5 due to the space required for installation of the bellows.) B = c/w integrated spindle clamping (Only with spindle bearing ball bearing) Spindle bearing: 1 = ball bearing 0 = slide bearing Spindle version:

Total length = basic length + travel Max. Mass [kg] travel Basic length per 100 mm travel 1344

Order instructions: • Please specify basic length • Right and lefthand thread and total travel when placing an order • Corrosion-protected units available on request • Second non driven carriage available on request • Scale upon request • Protect: version with bellows optional (IP 40) • Other screw leads available on request Total length = basic length + travel [mm] B = c/w integrated spindle clamping (Only with spindle bearing ball bearing) Spindle bearing: 1 = ball bearing 0 = slide bearing

EPX-II RechtsLinks Spindel.eps Total length = basic length + travel H2 Mass [kg] Max. travel Basic length per 100 mm Hub 1640

• Split screw Order instructions: • Please specify basic length and total travel when placing an order • Corrosion-protected units available on request • Second non driven carriage available on request • Scale upon request • Protect: version with bellows optional (IP 40) • Other screw leads available on request Righthand thread Total length = basic length + travel [mm] B = c/w integrated spindle clamping