Introduction Selection guide Light Clamps Solid Clamps Robust Clamps EMS Accessories RK ROSE+KRIEGER Connecting Technology - Light Clamps

Light load range ...the constructive plastic element connecting technology • Right angle tube connector Cross clamps Angle clamps Base clamps • Axially parallel tube connector Sleeve clamps Flange clamps • Hinge tube connector • Ball joint tube connector Hinge clamps Light clamps ball

(Single-pcs and multi-pcs elements) (Single-pcs and multi-pcs elements) (Single-pcs and multi-pcs elements) RK ROSE + KRIEGER Connecting Technology - Light Clamps 27 Appendix Mounting ITAS Accessories EMS Robust Clamps Solid Clamps Light Clamps Selection guide Introduction

Version: • Light Clamps Single-piece elements • For faster and more economic assembly Multi-piece elements • For add-on assembly and upgrading • Only one element per type (018 / 030 / □ 30) • Elements made of reinforced polyamide • Closed elements or half cups • Tube clamping of different diameters or sections due to a special bush system. Every bush form is worked with the needed tube diameter. Two basic diameters can be flexibly adapted with reducing bushes • Anti turning device for the bush former due to a lokation pin in the bush • Attractive design, low dead load • Zinc plated screws • Restistance...

Attention!The data in the chart do not ensure a guarantee of quality or a warrant characteristic of our products. These are nonbinding standard values which might be not reached in individual cases due to the temperature or surface finish of the clamping profile. 0J u Material data sheet available upon request. RK ROSE+KRIEGER Connecting Technology - Light Clamps 29

Light load range Reducing bushes / -insert size Reducing bushes / -insert form You can choose the size of the insert you want to introduce into the clamping element between 10 and 25 mm. Not only can you choose the diameter of the reducing bush you require, you also have the possibility to choose its form. All you need to do is to choose the tube section you would like to work with. The basic size of the round tubular connections is either 18 or 30mm. For any other required diameter the corresponding reducing bush can be delivered. Should you work with square tubes, which offer a choice between...

R-Clip for slot profile 30 mm Light Clamps Selection guide Anti-rotation for RK Light Clamps – single-piece Solid Clamps Robust Clamps RK Rose+Krieger has expanded its range of accessories for single-piece RK Light Clamps plastic tube connectors in the 30 mm size. When used with system configurations, the new Anti-Twist rotation locking system guarantees time savings in assembly and makes for simple adjustment of the construction. The system is made of anodised aluminium tubing (30 mm diameter) with four profile slots offset at an angle of 90° plus black, reinforced polyamide plastic clips. It...

Right angle tube connector Axially parallel tube connector Hinge tube connector

Selection guide Robust Clamps Solid Clamps Light Clamps RK ROSE+KRIEGER Connecting Technology - Light Clamps

• Purchase only in lot sizes and a multiple of that, see product table below • Inserts and bushes for diameter/ crosssection changes see accessories page 54 • Standard: equipped and preassembled with galvanised screws • Clamping levers have to be ordered separately, delivery unassembled See table last column and page 55 • Stainless screws Weight Clamping lever S

Cross clamp KV-KU a.E _ns *Reduction of the diameter or cross section of the clamping with bushes possible (Accessories p. 54). RK ROSE+KRIEGER Connecting Technology - Light Clamps 35

Angle-/Base clamps Order instruction: • Purchase only in lot sizes and a multiple of that, see product table below • Inserts and bushes for diameter/ cross- section changes see accessories page 54 • Standard: equipped and preassembled with galvanised screws • Clamping levers have to be ordered separately, delivery unassembled See table last column and page 55 • Stainless screws Anti-twist system applicable with Type 30 Angle clamps W-KU Code No.

Anti-twist system applicable with Type 30 Angle clamps WER-KU fiiRK ROSE+KRIEGER Code No. Angle clamps WV-KU Code No. Appendix Mounting ITAS Accessories EMS Robust Clamps Solid Clamps I Light Clamps Selection guide Introduction RK ROSE+KRIEGER Connecting Technology - Light Clamps 37

Angle-/Base clamps Order instruction: • Purchase only in lot sizes and a multiple of that, see product table below • Inserts and bushes for diameter/ cross- section changes see accessories page 54 • Standard: equipped and preassembled with galvanised screws • Clamping levers have to be ordered separately, delivery unassembled See table last column and page 55 • Stainless screws Anti-twist system applicable with Type 30 FS-KU 18 / 2 * Dimension of K are turned by 90° with a distance of 38-40 mm (slotted hole) Base clamps FS -KU Code No. Clamping lever S Code No.

*Reduction of the diameter or cross section of the clamping with bushes possible (Accessories p. 54). RK ROSE+KRIEGER Connecting Technology - Light Clamps 39 Appendix Mounting ITAS Accessories EMS Robust Clamps Solid Clamps I Light Clamps Selection guide Introduction

• Purchase only in lot sizes and a multiple of that, see product table below • Inserts and bushes for diameter/ cross-section changes see accessories page 54 • Standard: equipped and preassembled with galvanised screws • Clamping levers have to be ordered separately, delivery unassembled See table last column and page 55 • Stainless screws Weight Clamping lever S

Anti-twist system applicable with Type 30 Flange clamp FK-KU fiiRK ROSE+KRIEGER J50604942 Flange clamp FKV-KU [mm] *Reduction of the diameter or cross section of the clamping with bushes possible (Accessories p. 54). Appendix Mounting ITAS Accessories EMS Robust Clamps Solid Clamps I Light Clamps Selection guide Introduction RK ROSE+KRIEGER Connecting Technology - Light Clamps 41