Catalogs >
RK Rose+Krieger GmbH >
RK LightUnit-G / telescope slide guide

RK LightUnit-G / telescope slide guide
12Pages

Catalog excerpts

RK LightUnit-G / telescope slide guide - 1

fii RK ROSE+KRIEGER A Phoenix Mecano Company RK LightUnit-G RK LightUnit-G telescope Slide guide with individual positioning

Open the catalog to page 1

RK LightUnit-G / telescope slide guide - 2

Holding and positioning The RK LightUnit profile with one-sided slot makes for easy adjustment of the carriage with the individually adjustable positioning element G, without the need for any machining. If the carriage is moved over the positioning element G, it is secured in the desired position with the locking bolt. This connection technology provides a high degree of flexibility as (any number of) securing points do not need to be defined in advance (e.g. by drilling). So the limit positions can be adjusted at any time, and different carriages can be freely combined in order to achieve...

Open the catalog to page 2

RK LightUnit-G / telescope slide guide - 3

Overview individual components Fixing elements GF-KU P. 10 Guide carriage

Open the catalog to page 3

RK LightUnit-G / telescope slide guide - 4

Holding, positioning and telescoping The RK LightUnit-G telescope features a special telescopic unit which allows easy and space-saving integration and adjustment. Unlike the RK LightUnit-G, the telescopic version has a guide tube that can be positioned manually. Positioning elements can also be used in the guide tube, enabling any number of latching positions to be defined. Positioning element G Individually adjustable with a hex key Guide profile / outer profile Clear or black anodised Locking bolts Easy manual operation with spring reset Product benefits: Easy – Installation using just a...

Open the catalog to page 4

RK LightUnit-G / telescope slide guide - 5

Overview individual components Fixing elements Ø 40 mm Aluminium K P. 9 Guide carriage MD-KU-G P. 8 Fixing elements Ø 30 mm plastic tube FK-KU P. 9 RK ROSE+KRIEGER RK LightUnit-G telescope

Open the catalog to page 5

RK LightUnit-G / telescope slide guide - 6

Attention! The data in the chart do not ensure a guarantee of quality or a warrant characteristic of our products. These are nonbinding standard values which might be not reached in individual cases due to the temperature or surface finish of the clamping profile. Tightening torque: Cap screw M8: 8,0 Nm Cap screw M10: 50,0 Nm Positioning element G Tightening torque 1 Nm Material data sheet available upon request Load data RK LightUnit-G RK LightUnit-G telescope Fastening screw on the guide carriage tightened with tightening torque

Open the catalog to page 6

RK LightUnit-G / telescope slide guide - 7

Individual components fiiRK ROSE+KRIEGER• Guide profile clear or black anodised Standard lengths [mm] required length [mm] Version: 1 = natural AlMgSi0,5 2 = clear anodized AlMgSi0,5 • also stabilises the profile cross-section Code No. RK ROSE+KRIEGER RK LightUnit-G / telescope 7

Open the catalog to page 7

RK LightUnit-G / telescope slide guide - 8

Material: Reinforced polyamide, black; Fastening material galvanized. Scope of delivery: Clamping lever unmounted included in the scope of delivery.

Open the catalog to page 8

RK LightUnit-G / telescope slide guide - 9

Fixing elements fUiRK ROSE+KRIEGER Order instructions: • The fastening elements are fitted with screws as standard. These can be replaced with clamping levers if required. • A positioning element G is requi red for each fastening element in order to stabilise the guide profile. • A special reducing bush system allows different tube diameters to be connected • The range of different versions makes for easy mounting Material: Sizes 30: Reinforced polyamide, black; galvanized fastening material. Sizes 40: Cast aluminum

Open the catalog to page 9

RK LightUnit-G / telescope slide guide - 11

fiiRK ROSE+KRIEGER Order instructions: • Order quantities are partly subject to fixed scaling according to table Reducing bushes • The clamping diameter can be changed for further connection by simply replacing the reducing bushes. Clamping lever • The listed clamping levers allow the plastic elements to be retrofitted by simply replacing the hexagon socket screws. • When the handle is lifted, the serration is revealed and the clamping lever can be swivelled into the optimum clamping position. When released, the handle latches again automatically. Material: Handle made of PA, black,...

Open the catalog to page 11