Linear unit RK MonoLine - 28 Pages

Add to MyDirectIndustry favorites
Linear unit RK MonoLine

Catalog excerpts

Renowned Know-how Automation Technology fii RK ROSE+KRIEGER A Phoenix Mecano Company

 Open the catalog to page 1

Key features / technical benefits Tapered lubricating nipple 99 entral lubricating access on the C carriage facilitates maintenance Guided timing-belt Clamping strip 99 ecures the axis reliably S Centring holes in the guide carriage (Image shows optional centring sets as accessory) Variable motor connection 99 metal bellows coupling For 99 servo coupling with zero backlash For Motor shaft configuration 99 be modified at a later stage Can High efficiency Flexible positioning of motor thanks Max. usable travel speed regardless of length Central lubricating access on the carriage facilitates...

 Open the catalog to page 2

Centring holes in the guide carriage (Image shows optional centring sets as accessory) Timing belt closes flush with guide profile Tapered lubricating nipple access on the carriage facilitates maintenance Centring holes and fixing thread Short- and long carriage 99 both end plates possible At slots and centring holes Variable motor connection 99 metal bellows coupling For 99 servo coupling with zero backlash For Motor shaft configuration 99 be modified at a later stage Can Motor can be mounted optional at each side Vertical installation with locking device optional Additional independently...

 Open the catalog to page 3

Application examples RK MonoLine MT Guide profile moves Guide carriage moves RK MonoLine MT 99 ith angular planetary gearbox 99 ith planetary gearbox w w on request moving guide carriage on request

 Open the catalog to page 4

RK MonoLine - Table of contents

 Open the catalog to page 5

Technical data Calculation of the load characteristic to define the lifetime The lifetime of linear units are in accordance with the average loads and moments of an application. The load characteristic can approximately calculated by following equation with simultaneously appearing load and moments. Load characteristic = Application values (z.B. Fy) Catalog values (z.B. Fymax) Fy My Mx Mz + + + Fz + Fymax Mymax Mxmax Mzmax Fzmax Rough calculation of the load characteristics unit size larger Reduction of the app. values not possible Please contact us regarding a detailed lifetime...

 Open the catalog to page 6

Roller, external any position Guidance system Installation position Repeat accuracy Pitch accuracy neoprene, Pitch 5 mm, neoprene, Pitch 8 mm, neoprene, Pitch 8 mm, neoprene, Pitch 8 mm, Width 60 mm Pulley wheel circumference Ambient temperature Dynamic load data Force [N] Torque [Nm] Toothed-belt drive * Initial tension of the timing belt 0,8 x Fx Geometric moment of inertia [cm4]

 Open the catalog to page 7

Dynamic load data Force [N] Torque [Nm] Toothed-belt drive Load data Standard guide carriage RK MonoLine MT 80 Extended guide carriage RK MonoLine MT 80 initial tension of the timing belt 0,8 x Fx

 Open the catalog to page 8

Bending diagram RK MonoLine MT 80 in Fz L Bending diagram RK MonoLine MT 80 in Fy L

 Open the catalog to page 9

Order instruction: ■ Longer travel lengths on request Version ■ Guide Ideal as additional / secondary support for the RK MonoLine with toothed belt Total lenght = basic length + total travel (mm)

 Open the catalog to page 10

fUiRK ROSE+KRIEGER Total length = basic length + travel

 Open the catalog to page 11

Timing-belt unit RK MonoLine Z Place-Tec Order instructions: ■ Longer travel lengths on request ■ Also available without screw drive as a torque support Total lenght = basic length + total travel (mm)

 Open the catalog to page 12

fUiRK ROSE+KRIEGER Total length = basic length + travel

 Open the catalog to page 13

Timing-belt unit RK MonoLine MT Place-Tec Order instructions: ■ Longer travel lengths on request ■ Further independently movable guide carriages on request ■ Fixing element for vertical Total lenght = basic length + total travel (mm)

 Open the catalog to page 14

Total length = basic length + travel Gesamtlänge = Grundlänge + Hub Basic length

 Open the catalog to page 15

■ Two profile slots have been inserted in the guide carriage on which fittings can be securely attached in a variety of ways ■ Profile slots in the guide carriage and guide profiles facilitate fixation -20 slot geometry -30 slot geometry -Slot geometry for square nut DIN 562 10,2 -30 slot geometry -40 slot geometry

 Open the catalog to page 16

Clamping strips ■ Clamping strips facilitate fixation of the linear unit to the chassis or two units to a crossing table Material: Natural anodised aluminium, galvanised fixation material. Scope of delivery: 2 clamping strips with fixation material

 Open the catalog to page 18

Order instruction: ■ Purchase only in lot sizes and a multiple of that, see product table below Slot stones Slot stone -B-can be swivelled into the slot Square nut DIN 562 fiiRK ROSE+KRIEGER ■ Slot stones can be inserted and Material: galvanised steel positioned at the guide profile and guide carriage Square nut qzd1003261 M4 Slot stone -K-can be swivelled into the slot

 Open the catalog to page 19

Centering Sets for RK MonoLine ■ The following positions could Scope of delivery per set: be defined exactly during the de- 2 centering bolts and fixing sign process per set material - Load capacity ■ Reproductable position of the load capacity ■ Reduced assembly / disassembly time of the load capacity ■ Accuracy of the centering bolts h6 ■ To use for all RK MonoLine linear units

 Open the catalog to page 20

Slide centering RK MonoLine Z 80 with extended guide carriage RK MonoLine MT 80 with extended guide carriage RK MonoLine Z 40 RK MonoLine Z 40 with extended guide carriage RK MonoLine Z 60 RK MonoLine Z 60 with extended guide carriage RK MonoLine Z 80 RK MonoLine Z 120 RK MonoLine Z 120 with extended guide carriage *Note: Posi

 Open the catalog to page 21

Motor adapter kit for RK AC servomotors ■ Servomotors from the RK standard range can be easily connected ■ Complete motor adapter kits manufactured to your specifications on request Scope of delivery: Motor adapter kit, servo coupling with zero backlash and fixation material

 Open the catalog to page 22

Drive shaft ■ The RK MonoLine Z and MT is fitted as standard with a hollow shaft ■ Th is can be retrofitted with a drive shaft as an optional extra Scope of delivery: Drive shaft with fixation material

 Open the catalog to page 23

Order instruction: ■ Synchronising shaft for RK MonoLine MT on request ■ For torque transmission with parallel linear units ■ Synchronisation of the guide carriages by zero point alignment Scope of delivery: Synchronising shaft with fixation material Synchronising shaft Max. transfer torque: RK MonoLine Z 40 6,5 Nm Critical bend speeds

 Open the catalog to page 24

All RK Rose+Krieger GmbH catalogs and technical brochures

  1. RK LightUnit

    16 Pages

Archived catalogs

  1. Product overview

    24 Pages

  2. Profile Technology

    471 Pages

  3. Product overview

    57 Pages