fiiRK ROSE+KRIEGER A Phoenix Mecano Company The corrosion-resistant tubular linear unit

Linear unit E-II-stainless Single tube actuator - Linear unit E-II-stainless • Slot cover as dust protection or stroke limitation • Stainless steel ball bearing as screw bearing • With drain hole as standard Guide carriage /fixing elements • Range of variants facilitates connection to your design • Made from stainless steel, guide carriages with slide bush as standard • Units for light to heavy movement applications • Corrosion-resistant to media, e.g. water • Suitable for washing down • FDA-approved lubricants • Second free-running guide carriage • Higher temperature range up to 150°C

Properties/Technical data Dimensions, order numbers Position determination RK ROSE+KRIEGER Linear unit E-II-stainless

Linear unit E-II-stainless General information/operating conditions

Load data* F Force [N] I Geometric moment of inertia [cm4] * with reference to carriage (deflection of guide element f = 0.5 mm, static, end elements supported) RK ROSE+KRIEGER Linear unit E-II-stainless

Linear unit E-II-stainless Dimensions / ordering data Order instructions: Version: • Right- or lefthand thread • Choice of guide carriage, this must be ordered separately • Different "R" dimensions available on request • Higher temperature range available on request Total length = basic length + travel [mm] A = righthand thread with scale at 270° * B = righthand thread with scale at 270° * C = lefthand thread with scale at 270° * D = lefthand thread with scale at 270° *

RK ROSE+KRIEGER Linear unit E-II-stainless

Linear unit E-II-stainless Dimensions / ordering data Order instructions: Version: • Right- and lefthand thread • Choice of guide carriage, this must be ordered separately (total travel + basic length) in millimetres has to be specified when ordering • Different "R" dimensions available on request • Higher temperature range available on request Lefthand thread (shaft end L1) Total length = basic length + total travel [mm] 4 = 1 drive shaft at lefthand thread end 5 = 1 drive shaft at righthand thread end 3 = right and lefthand thread (RH/LH) N = RH/LH with scale at 270° *

V Total length = basic length + travel Basic length RK ROSE+KRIEGER Linear unit E-II-stainless

Linear unit E-II-stainless Guide carriage • A rotation locking device (drive key) is included in the scope of delivery of the linear unit. Additional drive keys (e.g. for free-running guide carriages) can also be ordered as an optional extra • For further dimensions, please refer to the catalogue • A range of different versions facilitate simple system mounting Precision cast stainless steel 1.4308 (AISI CF-8), electropolished finish Scope of delivery: Guide carriage with screws, losely enclosed 0 = without scale A = scale at 270° 3 = Temperature range (-30°C to +80°C) A = Temperature range (-30°C...

RK ROSE+KRIEGER Linear unit E-II-stainless 11

Linear unit E-II-stainless Fixing element • Clamping elements for the simple fixing of Linear units E-II-stainless Precision cast (AISI CF-8), electropolished finish

Code No. Type A B C D L P Rm [g] levers S Code No. Type A B C D LM P Rm [g] levers S RK ROSE+KRIEGER Linear unit E-II-stainless 13

Linear unit E-II-stainless Fixing/Drive • Accessory for fixing elements Clamping lever Material: Handle – precision cast stainless steel 1.4308 (AISI CF-8), electropolished finish. Other parts – stainless steel 1.4305 (AISI 303) Note: A washer (delivery scope of clamp) must be used if lever M10x40 shall be assembled (Symbolic representation) [mm] Code No. • Slot covers, can be used as dust protection or stroke limitation • Can be shortened or lengthened if required The covers are available as a pack of two, or as bar material. Scope of delivery: Pack of 2 cover strips or as bar material The linear...

fUiRK ROSE+KRIEGER Material: hub made of stainless stell 1.4305 Handle (rotating), stainless steel 1.4305 (AISI 303) RK ROSE+KRIEGER Linear unit E-II-stainless 15

Linear unit E-II-stainless Position determination Order instruction: • Position of scale on 0° or 180° as option Image shows scale mounted at 0°, to be read from right to left. Standard mounting at 270° (90° not technically possible) • Self-adhesive • Width:10 mm • 4 mm high figures High-performance film transparent – (-30°C to +80°C) white – (-30°C to +150°C)

Positioning indicator • If positioning indicators are fitted, the linear units are delivered exclusively with ball bearings Housing polyamide 6 Orange RAL 2004 Cope of delivery: Positioning indicator, clamping ring, shaft extensension and fastenings Note: „rising" and „falling" versions refer to the clockwise rotation of the drive shaft Installation position: horizontal RK ROSE+KRIEGER Linear unit E-II-stainless 17

Linear unit E-II-stainless Positioning indicator with spindle clamping • If positioning indicators are fitted, the linear units are delivered exclusively with ball bearings • The spindles of the linear units can be fixed with the clamping plates. This means that the linear units retain their set position at all times. Housing polyamide 6 Orange RAL 2004 Cope of delivery: Positioning indicator, clamping ring, shaft extensension and fastenings Note: „rising" and „falling" versions refer to the clockwise rotation of the drive shaft

RK ROSE+KRIEGER Linear unit E-II-stainless 19

Linear unit E-II-stainless Order instruction: • Please notice: To mount the position display on your linear unit, you will need additional accessories. This includes an adapter plate and an adapter set, specially developed for your linear unit. Electronic positioning indicator with / without spindle clamping Positioning indicator horizontal or vertical Electronic positioning indicator • LCD display with 6 digits,-digit height 7.5 mm • Various zero points for dimensional correction Housing polyamide Orange RAL 2004