Appendix Mounting I ITAS Accessories EMS Robust Clamps Solid Clamps Light Clamps Selection guide Introduction RK ROSE+KRIEGER Connecting Technology - ITAS 247

...no drilling or welding, no mitre cut - just assemble. Clamping set including clamping screw, clamping rocker, thrust pad and screw cap Internal tension system Principle: The clamping rocker is titled by screwing in the set screw. The other side of the clamping rocker pushes the pressure piece against the inner side of the tube. Without the need for any mechanical machining, the tube construction is positively and quickly connected by simply tightening a screw. Quick change system Working and machining areas which in the past required additional guards can now be made accessible with just a...

(Dimensions, code numbers) RK ROSE+KRIEGER Connecting Technology - ITAS 249 Appendix Mounting I ITAS Accessories EMS Robust Clamps Solid Clamps Light Clamps Selection guide Introduction

• ITAS die-cast elements clamping mechanism inside from steel (zinc plated) Adh. force: static pull, dynamic pull+presure

• Load data according to DIN EN 1991-1-1:2010-12 • Maximum permitted load of steps (for a length of 1,2 m) 1500 N • Maximum permitted load of stairs cross beams (for a 45° angle and a length of 4 m without support) 3500 N fiiRK ROSE+KRIEGER • Maximum permitted load of railing (distance between pillars 0,7 m) 500 Nm • The maximum permitted load of the platform depends on the base construction. It cannot exceed the maximum permitted load of the base clamps used. • Technical safety requirements in accordance with DIN EN ISO 14122 part 1-4 • The railing must have at least one knee rail • Do not exceed...

Internal tension system • Technically optimised solution for the installation of railings, frame structures, boundaries, superstructures, stairs and wor king platforms of all kinds. ween all of the elements used and the connecting tube are kind on the hands • Positive, quick connection with the simple tightening of a screw – without the need for any mechanical mach

Selection guide Robust Clamps Solid Clamps Light Clamps RK ROSE+KRIEGER Connecting Technology

• ITAS elements in various RAL colours

Corner joint WIE 40 Code No. Corner T-joint WITE 40 Code No. Appendix Mounting I ITAS Accessories EMS Robust Clamps Solid Clamps Light Clamps Selection guide Introduction RK ROSE+KRIEGER Connecting Technology - ITAS 255

• ITAS elements in various RAL colours

Cross horizontal KI 40H-45° Code No. < RK ROSE+KRIEGER Connecting Technology - ITAS 257

With toothing - 180° swivelling range, 15° locking increments Toothing can be removed for continuously variable adjustment With toothing - 180° swivelling range, 15° locking increments Toothing can be removed for continuously variable adjustment With toothing - 180° swivelling range, 15° locking increments Toothing can be removed for continuously variable adjustment Appendix Mounting I ITAS Accessories EMS Robust Clamps Solid Clamps Light Clamps Selection guide Introduction RK ROSE+KRIEGER Connecting Technology - ITAS

Stair railing support TGHF

On request: • ITAS elements in various RAL colours TSI 40 Code No. TSI 40-WI fiiRK ROSE+KRIEGER Illustration shows right hand version please read the instruction manual please read the instruction manual Appendix Mounting I ITAS Accessories EMS Robust Clamps Solid Clamps Light Clamps Selection guide Introduction RK ROSE+KRIEGER Connecting Technology - ITAS

Quick change system Quick & easy disassembly of rail parts in case of technical failures. • This system combines the proven flexibility of the internal tension system and an easy assembly and dismantling system which cannot be co pared to that of common railing systems. • It enables protected working and machine areas to be more accessible. • The new ITAS Quick change system permits an easy access to specific machine parts in case of technical malfunctioning: all you need is to remove the necessary part of the balustra

Introduction Selection guide Light Clamps Robust Clamps Solid Clamps Release stopper with a screwdriver Loosen clamping screw Dismantling of quick change system Turn the cross strut to 90° and then raise and release RK ROSE+KRIEGER Connecting Technology - ITAS

• ITAS elements in various RAL colours

Appendix Mounting I ITAS Accessories EMS Robust Clamps Solid Clamps Light Clamps Selection guide Introduction RK ROSE+KRIEGER Connecting Technology - ITAS

• ITAS elements in various RAL colours

Introduction Selection guide Light Clamps Solid Clamps Robust Clamps EMS Accessories ITAS RK Monitor Mounting Appendix The mobile ITAS ladder makes accessing various storage shelves easier. RK ROSE+KRIEGER Connecting Technology - ITAS

Angle plate TGHF Side plate Surface element support FEH-l 40 Stair cross beam profile Stair joint Step profile Stair corner joint

fiiRK ROSE+KRIEGER Aluminium tube Features: • The surface element support enables the clamping of panels of 4, 6 or 8 mm thickness. • The support can be used with a 040 tube (min. wall thickness 3 mm) • Only a 4.5 mm hole has to be bored into the tube where the support is then fixed with a thread former screw. Material: PA-GF, black Fixation set galvanized 3.3206/EN AW6063 T66(F25) Resistance moment W= 3 cm3 Moment of inertia I = 6 cm4 Appendix Mounting I ITAS Accessories EMS Robust Clamps Solid Clamps Light Clamps Selection guide Introduction

• ITAS elements in various RAL colours • The angle plate is fixed to the corner of the stair cross beam at 90° degrees. Angle plate for TGHF Code No.

Material: AlMgSi 0,5 F25, clear anodized Stair cross beam profile Code No. • The 'T'-slot channels of the extruded aluminium profile enable fitting of the fixing components for the step profile (see p. 272). • The geometry of the 'T'-slot channels is designed to comply with the BLOCAN® Profile Assembly System which is designed and manufactured by RK Rose+Krieger. • Threaded holes ensure that the stair joints (see p. 274) can be fixed with set screws quality 8.8 • Realisation of 38, 45 and 60 degree leadangles without mitre cuts of the beam profile by using special designed stair joints. Saws...