Heavy duty linear units D-Line - 52 Pages

Add to MyDirectIndustry favorites
Heavy duty linear units D-Line

Catalog excerpts

Renowned Know-how Automation Technology fii RK ROSE+KRI EGER A Phoenix Mecano Company

 Open the catalog to page 1

Heavy duty linear units D-Line The STRONG dimension in handling systems for heavy loads has a name: D-Line This whole new range of linear units is based on BLOCAN® heavy-duty profiles (D-profiles). D-Line puts into practice all the advantages of the latest developments in aluminium-alloy technology. This ensures a low specific weight, thus keeping the drive unit as small as possible – which is of great benefit when using axis that operate in sequence. Increased dynamic performance for the efficient use of short cycle times. FEM calculation helps to create highly-efficient geometric...

 Open the catalog to page 2

Heavy duty linear units D-Line - Contents

 Open the catalog to page 3

The guide body of the linear unit consist of extruded aluminium profiles from the familiar BLOCAN®- system range of D-profiles. These are supplied in standard lengths of 6 m. See the max. travel data in the ordering tables. It is technically possible two join two profiles to each other at the ends to obtain a greater stroke length (of up to 14 m). You should however consult with our Technical Department before doing so. Optional fixing holes can be made in the guide tables to customer specifications on request. Technical description Timing belt: Pulley box: Timing belt with steel...

 Open the catalog to page 4

Timing-belt drive, roller guide Order information: ■ Longer travel lengths available on request ■ On request, this unit is also available as roller guide without timing belt drive Type Basic lengtht A B Max. travel

 Open the catalog to page 5

Timing-belt drive, ball rail guide Order information: Longer travel lengths available on request request, this unit is also On available as roller guide without timing belt drive total length = basic length + travel Weight [kg] Basic length

 Open the catalog to page 6

Timing-belt drive, ball rail guide total length = basic length + travel Type

 Open the catalog to page 7

Order information: ■ Longer travel lengths available on request ■ On request, this unit is also available as roller guide without timing belt drive Type Basic length A B max. travel

 Open the catalog to page 8

The guide body of the linear unit consist of extruded aluminium profiles from the familiar BLOCAN®- system range of D-profiles. These are supplied in standard lengths of 6 m. See the max. travel data in the ordering tables. It is technically possible two join two profiles to each other at the ends to obtain a greater travel length (of up to 50 m). You should however consult with our Technical Department before doing so. Rack and pinions with angled teeth are used on versions with ballball rail guides.

 Open the catalog to page 10

Rack and pinion drive, roller guide fAARK ROSE+KRIEGER Order information: ■ Longer travel lengths available on request ■ On request, this unit is also available as roller guide without rack and pinion drive

 Open the catalog to page 11

Order information: ■ Longer travel lengths available on request ■ On request, this unit is also available as roller guide without rack and pinion drive

 Open the catalog to page 12

Accessories Track roller module Track roller module Guide shafts and housing profile Version 1 Straight teeth for roller guide Angled teeth for ball rail guide Guide shaft Runner block Connecting element for limit switch Pulley box with drive pins Connecting element for proximity limit switch

 Open the catalog to page 14

D-Line system components Brakes / Holding of linear axes Holding This means, when the machines is switched off, e.g. the Z-axis is moved to its initial position and then it is secured against falling down. In this way, it will be possible to replace for instance the motor or the gear unit easily. Slowing down That means, if the power or control unit fail or an emergency switch off is caused, the axis will be slowed down during its travel. Holding of linear axes Typical machine with linear axes are gantries, linear robots, machining centres and integrated production systems. If in case of...

 Open the catalog to page 16

Holding of linear axes, version KPE ■ Unit clamps the shaft without fAARK ROSE+KRIEGER Note: Not certified for the application in safety-relevant controls. Static holding force 5000 N Braking of linear axes, version KPC ■ Unit clamps and holds the shaft without pressure also in case of power failure ■ Hold a bar at a stopover Note: Not certified for the application in safety-relevant controls. Holding and braking -safe holding of linear axes, version KEC-S ■ Unit clamps and holds the shaft without pressure also in case of power failure in case of safety-relevant applications ■ Application...

 Open the catalog to page 17

D-Line system components Safety unit Diagram without fixtures for KPC / KPC-S

 Open the catalog to page 18

D-Line System profiles Heavy duty with maximum stability The basis of the heavy duty linear units are the wellknown heavy duty profiles from the product range group BLOCAN® - Profile assembling system. The aluminium profiles 80x80, 80x160, 80x240, 160x160, 160x240 and 160x320 mm combine very high bending and torsion resistance with relatively little weight. This way, even big gantry cranes and machine support structures that used to be mounted exclusively on steel structures, can be now built with lightweight aluminium profiles. By means of DIN slot stones add-on parts can be fitted to the...

 Open the catalog to page 20

Press mount connector 1 pcs D -N- 80 4C16701 Note: Drillings are designed for self-tapping screw channels (M8 / M12)

 Open the catalog to page 21

Slot geometry Press mount connector Note: Drillings are designed for self-tapping screw channels (M8 / M12)

 Open the catalog to page 22

fAARK ROSE+KRIEGER ICode No. profile D-160x240 Slot geometry Press mount connector Note: Drillings are designed for self-tapping screw channels (M8 / M12)

 Open the catalog to page 23

Note: Drillings are designed for self-tapping screw channels (M8 / M12) Slot geometry Press mount connector

 Open the catalog to page 24

fAA RK ROSE+KRIEGER Press mount connector ■ simple, cost-effective and high Material: Galvanised steel profile connection Includes: ■ no profile machining necessary The Order No. includes one press ■ can be disconnected at any mount connector. Depending on time and reused the orientation of the connection ■ minimal effort required in con- (longitudinal or transverse), the struction appropriate number of press mount connectors must be ordered. Please note the information and the connection pictograms in the profile data on page 21 - 24

 Open the catalog to page 25

All RK Rose+Krieger GmbH catalogs and technical brochures

  1. RK LightUnit

    16 Pages

Archived catalogs

  1. Product overview

    24 Pages

  2. Profile Technology

    471 Pages

  3. Product overview

    57 Pages