MACHINERY. SPECIFICATIONS HFBP-100 / 20 MWH PRESS Standard voltages available - please specify when ordering. H FRAME PRESS / BROACH PRESS 100 Ton / 20 Ton Power Movable Workhead VB-100 V BLOCKS matched pair. FSG-100 Front safety guard for operator protection. FPS-100 Foot pedal-electric solenoid valve for hands-free operation, c/w electric control panel 9- 24 24 Inch stroke cylinder. Electric / Hydraulic operation provides smooth, consistent pressing action. Open sides to facilitate work on long pieces. Flat ram nose can be easily changed to allow the user to adapt the press to a specific job. Quality Baldor motor, low speed. Low speed pump - quiet, dependable operation. Self-locking table design eliminates lateral movement. Powered movable workhead for off-center work allows operator to position the cylinder from left to right with the touch of a lever. Hydraulic power-lift for vertical displacement of table. Pressure regulator to limit the ram pressure. Cylinder activation is fingertip controlled, the more the hand lever is engaged the more the ram movement is accelerated. This allows the operator to control the proper speed for the task. High capacity 15 GAL. hydraulic oil reservoir. Low pressure hydraulic system maintains lower oil temperatures, resulting in higher efficiency and safer operation. All hydraulic and mechanical parts are standard in the industry, and available “ throughout North America. |«- Pressure regulator to limit the ram pressure. Speed control limits the maximum speed of ram travel, allowing operator to select the proper speed for the task. Custom designs available * Factory speed set to 22.5 IPM (OSHA STD). We Build Them your Way! may 2016 Capable of up to 97 IPM. We recommend using proper safety guarding.