eaKstem rasteners rivets aveugles a W fTr ^.rupture de tige

Riv-Elit® breakstem blind rivets - Rivets aveugles a rupture de tige Riv-Rlit® Standard blind rivet - rivet aveugles standard 6 - 21 Closed end blind rivet - rivet etanche 22 - 32 Peel type blind rivet - rivet eclate 33-34 T ri-fold type blind rivet - rivet etoile 35-36 Grooved blind rivet - rivet cannele 37-38 Multi-grip blind rivet - rivet aveugle multi-serrage 39 - 46 High strength steel rivet - rivet a haute resistance acier 47 High strength stainless steel rivet - rivet a haute resistance inox 48 Riv-Elit® structural high resistance rivets and bolts - Rivets et boulons...

BREAKSTEM BLIND RIVETS RIVETS AVEUGLES A RUPTURE DE TIGE Our range of Riv-Elit® breakstem rivets has been designed for a permanent, Blind-side installation meaning access from one side of the worksheet only. The rivet consists of two parts : the body and the mandrel. The body expands during the setting process forming a closing head on the back side ensuring high clamping and secure joints. The mandrel helps the body to expand therefore it has to be always stronger than the body. The breaking point where the mandrel breaks ensures that the body was properly expanded and the materials were correctly...

BREAKSTEM BLIND RIVETS RIVETS AVEUGLES A RUPTURE DE TIGE Riveting process 1- The mandrel is introduced into the hole of the worksheets. 2- The setting tool actuation pulls the mandrel head through the rivet body expanding it within the hole. 3 - The mandrel breaks at the breaking point. The bulb forming at the back side ensures high clamping capability and secure joints. Processus de rivetage 1- Mise en place du rivet dans les pièces à assembler préalablement percées. 2- Mise en place de la riveteuse qui exerce une traction sur la tige en accostant les pièces à assembler, la tête du clou rentre...

Material The selection of the materials of the body and the mandrel depends on the application environment, corrosion resistance, electrical conductivity, strength and temperature. Dissimilar materials can arise corrosion. The below table shows the combination of different materials and corrosion resistance. Matieres Le choix de la matiere du corps et de la tige dependent de I'environnement dans lequelevoiue 'application, la resistance a la corrosion, la conductivity eiectrique, la temperature et la charge supportee. L 'assemblage des matieres differentes peut etre corrosif. La tableau ci-dessous...

Material thickness The length of the body depends on the thickness of all materials to be assembled. Epaisseur matiere La longueur du corps depend de l'epaisseur des matieres a assembler. Hole size The recommended hole size is important to ensure secure joints. Please refer to our datasheets. Trou de pergage Le trou de pergage conseille est important afin d'assurer un accostage et un serrage solides. Merci de vous referer a notre catalogue. Options Different colours, finishes, anodising and coatings are available on request. Options Un vaste choix de couleurs, finitions, traitements de surface...

STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 We are offering an extensive range of standard rivets Riv-Elit® which can be delivered in a variety of alloys and with different head shapes. They can be made of aluminium, steel, stainless steel or copper with a dome, countersunk or large and extra large head. They are suitable for a large diversity of applications : trailers, containers, insulation, furniture or automotive and aerospace industry, heating and air conditioning, domestic appliances… Riv-Elit® large head rivets are specially designed for soft materials : large diameter...

STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Dome head Tete plateP/N : E RS TP ALAC + 2404 dl0 4,0 Grip range L Code Serrage en mm 6 4006 1,5-3,0

STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Tete plate Dome head P/N : E RS TP ALAC + 4806 Grip range / Serrage en mm 1,0-3,0 3,0-4,5 4,5-6,0 6,0-8,0 8,0-10,0 10,0-12,0 12,0-14,0 14,0-16,0 16,0-18,0 18,0-21,0 21,0-23,5 23,0-25,0 25,0-30,0 30,0-35,0 35,0-40,0 40,0-45,0 45,0-50,0 50,0-55,0 dl0 6,0 Grip range L Code /Serrage en mm 8 6008 2,0-4,0

AlMg3/3,5 Tete large STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Alu/SteelAlMg3/3,5 Large head P/N : E RS TL ALAC + 3206/d2 dl0 3,2 Grip range / L Code Serrage en mm 6 3206/9,5 1,0-3,5 Grip range / Serrage en mm 2,5-4,5 4,5-6,0 6,0-8,0 8,0-10,0 10,0-12,0 12,0-14,0 14,0-17,0 17,0-20,0 20,0-23,0 23,0-26,0

AlMg3/3,5 STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Alu/SteelAlMg3/3,5 Tete extra large Extra large head P/N : E RS TL ALAC + 4810/d2 Grip range / Serrage en mm 3,5-6,0 6,0-8,0 8,0-10,0 10,0-12,0 12,0-14,0 14,0-16,0 16,0-18,0 18,0-20,5 20,5-22,5 22,5-24,5 23,0-25,0 25,0-30,0

STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Tete fraisee Countersunk head P/N : E RS TF ALAC + 2406 dl0 2,4 Grip range L Code Serrage en Grip range/ Serrage en mm 1,0-3,5 2,0-4,5 4,5-6,0 6,0-8,0 8,0-10,0 10,0-12,0 12,0-14,0 14,0-16,0 16,0-21,0 21,0-25,0 25,0-30,0 Grip range Serrage en mm 2,5-4,5 4,5-6,0 6,0-8,0 8,0-10,0 10,0-12,0 12,0-14,0 14,0-17,0 17,0-21,0 21,0-25,0

Tete plate STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Dome head P/N : E RS TP ALAL + 3206 Grip range Serrage en mm 1,5-3,5 3,5-5,0 5,0-7,0 7,0-8,5 8,5-10,5 10,5-13,00

STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Tete plate Dome head P/N : E RS TP ALIN + 3006 dl0 3,0 0 hole/pergage: 3,1 d2 0 : 6,5 k: 0,8 P: > 27 d3 0 : 1,75 Tensile/traction: 870 N Shear/cisaillement: 680 N Grip range L Code Serrage en mm 6 3006 1,5-3,5 Grip range Serrage en mm 3,0-4,5 4,5-6,5 6,5-8,5 8,5-10,5 10,5-12,0 12,0-14,0 14,0-16,5 16,5-20,0 20,0-25,0

Tete plate Dome head P/N : E RS TP ACAC + 3005 dl0 3,0 Grip range/ L Code Serrage en mm 5 3005 0,5-1,5 Acier tete large disponible sur demande. Grip range/ Serrage en mm 1,0-2,5 2,5-4,5 4,5-6,0 6,0-8,0 8,0-10,0 10,0-11,5 11,5-13,5 13,5-15,0 15,0-17,0 17,0-20,0 20,0-25,0