Breakstem blind structural and non structural rivets, lock bolts.
80Pages

CONTENT SOMMAIRE Riv-Elit® breakstem blind rivets - Rivets aveugles a rupture de tige Riv-Rlit® Standard blind rivet - rivet aveugles standard Closed end blind rivet - rivet étanche Peel type blind rivet - rivet éclaté Tri-fold type blind rivet - rivet étoilé Grooved blind rivet - rivet cannelé Multi-grip blind rivet - rivet aveugle multi-serrage High strength steel rivet - rivet à haute résistance acier High strength stainless steel rivet - rivet à haute résistance inox Riv-Elit® structural high resistance rivets and bolts - Rivets et boulons de structure haute résistance Rivet with large...

BREAKSTEM BLIND RIVETS RIVETS AVEUGLES A RUPTURE DE TIGE Our range of Riv-Elit® breakstem rivets has been designed for a permanent, Blind-side installation meaning access from one side of the worksheet only. The rivet consists of two parts : the body and the mandrel. The body expands during the setting process forming a closing head on the back side ensuring high clamping and secure joints. The mandrel helps the body to expand therefore it has to be always stronger than the body. The breaking point where the mandrel breaks ensures that the body was properly expanded and the materials were...

BREAKSTEM BLIND RIVETS RIVETS AVEUGLES A RUPTURE DE TIGE Riveting process 1- The mandrel is introduced into the hole of the worksheets. 2- The setting tool actuation pulls the mandrel head through the rivet body expanding it within the hole. 3 - The mandrel breaks at the breaking point. The bulb forming at the back side ensures high clamping capability and secure joints. Processus de rivetage 1- Mise en place du rivet dans les pièces à assembler préalablement percées. 2- Mise en place de la riveteuse qui exerce une traction sur la tige en accostant les pièces à assembler, la tête du clou...

BREAKSTEM BLIND RIVETS RIVETS AVEUGLES A RUPTURE DE TIGE Material The selection of the materials of the body and the mandrel depends on the application environment, corrosion resistance, electrical conductivity, strength and temperature. Dissimilar materials can arise corrosion. The below table shows the combination of different materials and corrosion resistance. Material of rivet body - Corps du rivet Le choix de la matière du corps et de la tige dépendent de l’environnement dans lequel évolue l’application, la résistance à la corrosion, la conductivité électrique, la température et la...

BREAKSTEM BLIND RIVETS RIVETS AVEUGLES A RUPTURE DE TIGE Material thickness The length of the body depends on the thickness of all materials to be assembled. Epaisseur matière La longueur du corps dépend de l’épaisseur des matières à assembler. Hole size The recommended hole size is important to ensure secure joints. Please refer to our datasheets. Trou de perçage Le trou de perçage conseillé est important afin d’assurer un accostage et un serrage solides. Merci de vous référer à notre catalogue. Options Different colours, finishes, anodising and coatings are available on request. Options...

STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 We are offering an extensive range of standard rivets Riv-Elit® which can be delivered in a variety of alloys and with different head shapes. They can be made of aluminium, steel, stainless steel or copper with a dome, countersunk or large and extra large head. They are suitable for a large diversity of applications : trailers, containers, insulation, furniture or automotive and aerospace industry, heating and air conditioning, domestic appliances… Riv-Elit® large head rivets are specially designed for soft materials : large...

STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Tête plate Dome head P/N : E RS TP ALAC + 2404 d1ø 2,4 Ø hole /perçage:2,5 d2 ø : 5,0 k: 0,7 P: ≥ 27 d3 ø : 1,45 Tensile/traction: 355 N Shear/cisaillement : 315 N Ø hole/perçage:3,1 d2 ø : 6,5 k: 0,8 P: ≥ 27 d3 ø : 1,75 Tensile /traction: 810 N Shear/cisaillement: 620 N Grip range / Serrage en mm 0,5-2,0 2,0-4,0 4,0-6,0 6,0-8,0 8,0-10,0 d1ø 3,2 Ø hole/perçage: 3,3 d2 ø : 6,5 k: 0,8 P: ≥ 27 d3 ø : 1,75 Tensile/traction: 980 N Shear/cisaillement: 760 N d1ø 4,0 Ø hole/perçage : 4,1 d2 ø : 8,0 k: 1,0 P: ≥ 27 d3 ø : 2,1...

STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Tête plate Dome head P/N : E RS TP ALAC + 4806 d1ø 4,8 Ø hole/perçage : 4,9 d2 ø : 9,5 k: 1,1 P: ≥ 27 d3 ø : 2,7 Tensile/traction : 2230N Shear/cisaillement: 1690 N Ø hole/perçage : 5,1 d2 ø : 9,5 k: 1,1 P: ≥ 27 d3 ø : 2,7 Tensile/traction : 2500N Shear/cisaillement: 2000 N d1ø 6,0 Ø hole/perçage : 6,1 d2 ø : 12 k: 1,5 P: ≥ 27 d3 ø : 3,5 Tensile/traction : 3900 N Shear/cisaillement : 3000 N Ø hole/perçage : 6,5 d2 ø : 13 k: 1,8 P: ≥ 27 d3 ø : 3,80 Tensile/traction : 4100 N Shear/cisaillement : 3120 N

STANDARD BLIND RIVETS DIN 7337 RIVETS AVEUGLES STANDARD DIN 7337 Tête large Large head d1ø 3,2 Ø hole/perçage : 3,3 d2 ø : 9,5 k: ≤ 2 P: ≥ 27 d3 ø : 1,7 Tensile/traction : 980 N Shear/cisaillement: 740 N Grip range / Serrage en mm 1,0-3,5 3,5-5,0 5,0-7,0 7,0-9,0 9,0-11,0 Ø hole/perçage : 4,1 d2 ø : 12,0 k: ≤ 2,5 P: ≥ 27 d3 ø : 2,1 Tensile/traction : 1600 N Shear/cisaillement : 1180 N Ø hole/perçage : 4,9 d2 ø : 14,0 k: ≤ 2,5 P: ≥ 27 d3 ø : 2,7 Tensile/traction : 2230 N Shear/cisaillement : 1540 N d1ø 5,0 Ø hole/perçage : 5,1 d2 ø : 14,0 k: ≤ 2,5 P: ≥ 27 d3 ø : 2,7 Tensile/traction : 2400 N...