TBM sludge dewatering unit

Product catalog summary

Introduction
The document describes a sludge dewatering vehicle designed to reduce the volume of collected waste through sludge and water separation, offering significant savings. It is suitable for use with septic tanks, grease traps, and settling ponds.

Specifications

Manufacturer: RIVARD, located in Daumeray, France.
Chassis: Designed for a 6x2 (3-axle) configuration, with other chassis options available upon request.
Tanks:
- Waste vacuum tank: 4 cubic metres
- Dewatered waste tank: 8 cubic metres, with a tipping facility at a 46° angle suitable for standard skip height
- Separated water tank: 3.3 cubic metres
- Polymer tank: 800 litres
- Fresh water tank: 900 litres
Vacuum Pump: Vacuum vane pump with a capacity of 900 cubic metres/hour free flow and 860 cubic metres/hour at 60% vacuum.
High Pressure Water Jetting Pump: 25 hp jetting pump delivering 70 litres/min at 90 bar.
Jetting Hose Reel: Located in a storage cabinet at the rear of the vehicle, with a capacity for 80m of 1/2’’ diameter jetting hose.
Suction Hose Storage: Includes a storage hose reel on the rear door and additional storage on top of the tank.
Storage and Lockers: Designed with locking facilities, including PPE and personal belongings lockers with a hand washer.
Heating System: Prevents frost in the separated water tank, water jetting line, and hydraulics.
Control Panel Cabinet: Features PLC and CAN Bus for simplified operations and improved diagnostics, with a 7’’ IP66 colour monitor and radio remote control.
Safety Features: Includes ergonomic design, emergency stop button, hygiene improvements, and a reversing camera.
Compliance: Meets EU Machinery Directive 2006/42/EC and relevant country traffic regulations.

Dimensions

Length: 8,650 mm
Height: 3,700 mm
Width: 4,200/4,300 mm

Catalog excerpts

SLUDGE DEWATERING UNIT Sludge dewatering vehicle designed for reducing the volume of collected wastes, after sludge and water separation, providing significant savings. Suitable for septic tanks, grease traps, settling ponds, … "Together, We can sh

Open the catalog to page 1

SPECIFICATIONS TBM combination unit to be fitted on 6x2 (3-axle) Other chassis on request Tanks - Waste vacuum tank : 4-cubic metre - Dewatered waste tank with tipping facility at 46° angle and suitable for standard skip height : 8-cubic metre - Separated water tank : 3.3-cubic metre - Polymer tank : 800 l - Fresh water tank : 900 l Vacuum Pump Vacuum vane pump 900 cubic metre/hour free flow 860 cubic metre/hour at 60% vacuum High Pressure Water Jetting Pump 25 hp jetting pump 70 l/min at 90bar Jetting hose reel - located in a storage cabinet at the rear of the vehicle - Capacity 80m 1/2’’ diam....

Open the catalog to page 2

TBM sludge dewatering unit

TBM sludge dewatering unit

Catalog excerpts

All RIVARD catalogs and technical brochures