*mydirectindustry

Catalogs
RIUS-COMATEX
ANB 03/4 - 04/3

ANB 03/4 - 04/3

1 / 2 PagesView full catalog

ANB 03/4 - 04/3

Product catalog summary

Technical Specifications:

Equipped with a 0.75 HP A/C motor, operating at 220/380 V, 50 or 60 Hz, 3-phase.
Pneumatic air pressure requirement is 0.63 Mpa with an air consumption of 70 liters per minute.
Features a microprocessor control system and an electronic frequency variator.
Includes independent heads for operation.

Automatic Operations:

Automatic hitching of the bandage end.
Stops automatically upon reaching the programmed roll length.
Automatic cutting of the bandage.
Slides the rolled bandage out of the spindle.
Delivers the final roll to the storage container.
Includes a positive elastic feeder for elastic bandages (specific to model ANB 04/3).

Control Panel Features:

Equipped with stop and run push-buttons.
Includes a speed regulation potentiometer.
Features a bandage length programmer and a roll quantity programmer.
Displays working time, total roll quantity, and total bandage length.
Includes a pressure level indicator and a general feeding switch.
Equipped with a security stop and complies with EC security and protection regulations.

Product Specifications:

For bandages with widths of 50, 75, 100, and 150 mm (ANB 03/4) and up to 200 mm (ANB 04/3).
Number of exits: 4 for ANB 03/4 and 3 for ANB 04/3.
Selectable final product lengths range from 2 to 10 meters.
ANB 03/4 is for non-elastic bandages, while ANB 04/3 accommodates both elastic and non-elastic bandages.

Additional Information:

Both models share the same dimensions.
Manufactured by Construcciones Metalúrgicas Especiales, S.A., located in Sant Joan de Vilatorrada, Barcelona.

Catalog excerpts

ANB 03/4 - 04/3 Automatic rolling, measuring and cutting machine for bandages Machine automatique d’enrouler, mesurer et couper de bandes Máquina enrolladora, medidora y cortadora automática de venda

Open the catalog to page 1

TECHNICAL SPECIFICATIONS DONNÉES TECHNIQUES CARACTERÍSTICAS TÉCNICAS • A/C Motor of 0.75 HP. 220/380 V. 50 or 60 Hz. 3 Ph. • Pneumatic air pressure: 0.63 Mpa. • Air consumption: 70 Lt/Minute. • Control system through Microprocessor. • Electronic frequency variator. • Independent heads. • Moteur A/C de 0.75 HP. 220/380 V. 50 ou 60 Hz. 3 Ph. • Pression du réseau pneumatique : 0.63 Mpa. • Consommation d’air: 70 Lt./Minute. • Système de control par microprocesseur. • Variateur électronique de fréquence. • Têtes indépendantes. • Motor A/C de 0.75 HP. 220/380 V. 50 ó 60 Hz. 3 Ph. • Presión de la red...

Open the catalog to page 2

ANB 03/4 - 04/3

ANB 03/4 - 04/3

Catalog excerpts

All RIUS-COMATEX catalogs and technical brochures