RITTER Slide-in Type Switchgear GT 5

Product catalog summary

Overview
The document describes a slide-in type switchgear with a circuit-breaker and Pelta type busbar, designed for air insulation and narrow type metal enclosure. It is metal clad and suitable for use up to 24 kV, with a current capacity of up to 3150 A and a short circuit capacity of 40 kA for 3 seconds. The switchgear complies with IEC 62271-200, DIN EN 62271-200, VDE 0671-200, and DIN EN 60694 standards.

Rated Technical Data

Voltage: 24 kV
Current (busbar and branch): up to 3150 A
Peak current: 100 kA
Short time current: 40 kA for 3 seconds
Arc resistance: 1 second

Dimensions

Width: 800 / 1000 mm
Depth: 1550 mm
Height: 2360 – 2660 mm

Design Features
The switchgear features a slide-in type design with a circuit-breaker and single busbar. It is air insulated, metal enclosed, and metal clad, with proofing against internal arcing. The design includes compartmentalization between cubicles and busbar, and an integrated pressure relief duct.

Cubicle Styles
The switchgear includes vacuum- and gas-insulated circuit-breakers in a slide-in type design, with measuring cubicles available in fixed mounted or slide-in type designs.

Field of Application
This compact circuit-breaker switchgear is suitable for distribution substations in grid, industrial, and power supply plants. It is applicable for switching transformers, motors, generators, capacitors, and transmission lines.

Particularities
The switchgear is noted for its compact design with high performance, a power-free interlocking system, and an integrated ventilation system.

Catalog excerpts

Slide-in type switchgear with circuit-breaker and Pelta type busbar air insulated ■ narrow type ■ metal enclosure, metal clad up to 24 kV, list 2 ■ up to 3150 A and 40 kA 3s ■ IEC 62271 – 200 DIN EN 62271-200 ■ VDE 0671 – 200 ■ DIN EN 60694

Open the catalog to page 1

Slide-in Type Switchgear Type GT 5 24 kV – compact slide-in type switchgear. Cubicle Styles Vacuum- and gas insulated circuit-breakers in slide-in type design. Measuring cubicles in xed mounted or slide-in type design. Design Slide-in type switchgear with circuit-breaker and single busbar, narrow type, metal enclosure, metal clad, air insulated, proofed to internal arcing, compartmentalization between the cubicles and busbar, slide-in- and cable terminal section. The pressure relief duct is integrated in the panel. Field of Application Compact circuit-breaker switchgear for distribution substations...

Open the catalog to page 2

RITTER Slide-in Type Switchgear GT 5

RITTER Slide-in Type Switchgear GT 5

Catalog excerpts

All RITTER catalogs and technical brochures