Faster - better - everywhere.

Baying systems TS 8/Rail systems

It all fits together perfectly – no corner, no level in the enclosure is left unused. This facilitates high packaging densities and significantly reduced enclosure volumes. Allow us to inspire you, and give it a try. ◾ Simple installation without machining ◾ Identical pitch pattern in the width and depth ◾ High static load capacity, even for heavy installations ◾ Easily used in combination with mounting plates and partial mounting plates

TS 8 baying systems Installation examples with TS system rails Clearance width Depending on attachment, the following values apply to the clearance between the mounting levels: ◾ Outer mounting level = Enclosure width and depth minus 42 mm ◾ Inner mounting level = Enclosure width and depth minus 88 mm Outer level Inner level Outer and inner level PS-compatible installation Roof installation Installation with: ◾ PS punched section with mounting flange ◾ PS punched section without mounting flange ◾ PS punched rail in three mounting variants ◾ TS punched rails ◾ TS punched section without mounting...

TS 8 baying systems Installation examples with TS system rails Cover installation Punched sections and rails may be mounted on the horizontal enclosure sections in both the width and depth. Installation accessories TS punched section with mounting flange 17 x 73 mm for the outer level TS support strip for the outer level 1 TS punched rail 18 x 38 mm1) for the Ⅲ outer level Ⅲ horizontal enclosure sections Ⅲ adaptor rail for PS compatibility TS punched section with mounting flange 17 x 73 mm for the inner level TS support strip for the inner level TS punched section with mounting flange 23 x 73...

Attachment may be made at any point in the TS 8 enclosure space. Not only with horizontal rail installations directly between the TS sections, but by combining vertical and horizontal rails, any given mounting level in the width, height and depth may be achieved. Vertical mounting levels The basis for a second mounting level across the entire enclosure height is quickly achieved, e.g. with two PS punched sections without mounting flanges 23 x 73 mm 9. Between these two sections, configuration may be achieved with PS punched rails 10, 11 and 13, with PS punched sections without mounting flanges...

TS 8 baying systemsInstallation examples with TS system rails Vertical outer mounting level Optimum space utilisation and super-fast assembly by mounting the TS punched section with mounting flange directly onto the outer level of the TS 8 vertical section. Simply snap into position and secure! Installation accessories (Consecutive numbering in accordance with diagram on page 4) |T1 TS punched section with mounting flange 17 x 73 mm for the outer level 1^1 TS support strip for the outer level n TS punched rail 18 x 38 mm1) for the ■ outer level ■ horizontal enclosure sections ■ adaptor...

■ Enclosures ■ Power Distribution ■ Climate Control ■ IT Infrastructure ■ Software & Services TS 8 - Full details are available at: POWER DISTRIBUTION CLIMATE CONTROL SOFTWARE & SERVICES^"