More efficiency – with the base/plinth system VX
24Pages

Faster - better - everywhere.

POWER DISTRIBUTIONCLIMATE CONTROL FRIEDHELM L O H GROUP

MORE EFFICIENCY The best of everything – The base/plinth system VX suits almost any enclosure application. It combines the best of all existing Rittal base/plinth functions in one variable modular system, giving you extra space, more user-friendly assembly, time savings and additional flexibility, despite a smaller number of parts. Fast, simple and backward-compatible – The VX system, with its largely tool-free mounting, simplifies assembly, configuration and baying, while at the same time saving time, parts and warehousing costs. It replaces the base/plinth systems TS and Flex-Block. All...

POWER DISTRIBUTIONCLIMATE CONTROL FRIEDHELM L O H GROUP

MORE SPACE Create extra space - The base/plinth system VX is more than just a stable enclosure base with a protective function. In fact, it includes the entire base/plinth area underneath the enclosure, e.g. for accommodating cables or for seamless, secure cable routing from enclosure to enclosure. Use more space flexibly - The option of partially or wholly eliminating the symmetrical trim panels, the consistent system punchings, and the simplified mounting of the punched sections and rails transform the base/plinth into a flexibly configurable space extension to the enclosure, open at the...

MORE CONVENIENT ASSEMBLY

Positioning aid The precise, anti-twist mounting of the base/plinth on the enclosure is simplified by a practical positioning aid on the VX25. Access The clip-fastened trim panels may be securely screw-fastened as well. They are easily removed to allow rapid access to the base/plinth interior. Convenient attachment The nuts permanently integrated into the base/plinth corner pieces save you from having to fiddle with loose parts when screw-fastening from the inside. Alternatively, parts may also be screwfastened directly from the outside into the corner piece of the VX25.

MORE TIME SAVINGS

Baying Baying is convenient, either by folding out the trim panel in the depth, or via the stable baying bracket of the VX25. Cable management Cables are securely routed and attached via the punched section with mounting flange in the base/plinth, for time and space savings. Transportation The dimensions, designed to fit standard lifting trucks, ensure that even bayed enclosures are easily transported at any time.

MORE FLEXIBILITY

Multi-use The system accessories, such as cable clamp rails, may be used directly with the aid of the base/plinth installation bracket, even with a vertically fitted trim panel. Base mounting The base mounting plate allows retrospective attachment to the base, even where the base/plinths are already screw-fastened to the enclosure. Levelling The stable design of the levelling components compensates for floor irregularities of up to 15 mm, even with fully configured enclosures.

Base/plinth Base/plinth system VX Modular base/plinth diversity The new, innovative base/plinth system VX offers an unprecedented diversity of functions and applications. It combines all existing base/plinth functions in a single solution, as well as opening up many new applications. As if that weren't enough, it is also backward-compatible with existing enclosure solutions TS, TS IT, SE, CM, TP, PC, IW and TE. In short, it is a base/plinth system. The base/plinth system VX comprises the following components: ◾ Base/plinth corner pieces with base/plinth trim panels, front and rear ◾...

Base/plinth corner pieces with base/plinth trim panels, front and rear Sheet steel for VX, TS, TS IT, SE, CM, TP, PC, IW, TE High-load capacity base/plinth corner pieces with moulded self-positioning to the baying enclosure system VX25, may be used with or without base/ plinth trim panels depending on the application. Large openings in the corner piece for optimum access to the screw-fastening point, may be concealed with a plastic corner and baying cover. Material: - Base/plinth corner piece: Sheet steel - Base/plinth trim panel front/rear: Sheet steel - Corner and baying cover:...

Base/plinth trim panels, vented Sheet steel For venting the enclosure via the base/plinth. Specifically in applications such as power distribution where the enclosure gland plates are not used, this can be used to achieve a higher air throughput inside the enclosure. Various solutions to raise the roof and special roof plates with vent openings are also available for enclosure venting. With a 200 mm base/plinth height, one or two vented trim panels may optionally be used. Thanks to the complete symmetry of the base/plinth system VX, the vented trim panels may either be fitted at the front,...

Base/plinthBase/plinth system VX Base/plinth trim panels, sides Stainless steel To finish off a base/plinth unit at the side and for additional stabilisation or for interior configuration of bayed base/plinths. One 200 mm high or two 100 mm high trim panels may optionally be fitted on 200 mm high base/plinths. Material: - Base/plinth trim panels: Stainless steel 1.4301 (AISI 304) Surface finish: - Brushed, grain size 400 Supply includes: - 2 base/plinth trim panels - Assembly parts - Base/plinth installation bracket, see page 18 Baying bracket, internal ■ Fast, secure installation either...

Transport castors For locating onto the base/plinth corner piece, 100 or 200 mm high. Load capacity: - Maximum permissible load per twin castor: 1000 N Supply includes: - 4 twin castors, 2 x with, 2 x without locks Colour: - RAL 9005 - Base/plinth trim panels, sides, for stabilisation, see page 14 Base mounting plate For attaching the base/plinth to the floor. For assembly screws up to 12 mm 0. Material: - Sheet steel Surface finish: - Zinc-plated

Base/plinthBase/plinth system VX Base/plinth installation bracket for base/plinth system VX, sheet steel and stainless steel For configuring the base/plinth with punched sections with mounting flanges or cable clamp rails. To fit 100 and 200 mm high base/plinth trim panels in sheet steel and stainless steel. Material: - Stainless steel 1.4301 (AISI 304) Supply includes: - 2 installation brackets - 2 mounting brackets for cable clamp rail - Assembly parts Note: - For interior installation on upright base/plinth trim panels - For base/plinth trim panels rotated through 90°, the installation...