STARGUN - POLYFUSION
28Pages

itmo PLASTIC WELDING TECHNOLOGY PRODUCTS CATALOGUE "AT EASE IN YOUR CONSTRUCTION SITE"

PLASTIC FABRICATION OUTPUT: Kg / h lb / h

CUSTOMIZED PLASTIC FABRICATION USING THE STARGUN STARGUN is the line of handy and easy to use extruder welders. All models distinguish for being light, compact and very smooth during the welding phase. The entire line is supported by a series of interchangeable Teflon® shoes which allow the STARGUN to adapt to every kind of welding situation: from plane sheets to oblique angles. Thanks to their versatility they are able to weld different types of fabrications like: containing tanks, fume treatment towers, scrubbers, chemical hoods, aspiration systems, and for joining linings and...

K-SB 20 K-SB 30 K-SB 20 is a compact and ergonomic extruder equipped with a power control device and the safety system "motor block" that doesn't allow the machine to start before it reaches the right temperature. The extruder has an innovative universal feeding system that makes possible to use the machine with different diameters of wire. - Rod 0 3 - 4 mm; 1/8" - 5/32" - Backlight display - Two high-brightness LEDs for welding area - Power regulator; security system "motor block" - Independent blower - Thermoregulator double electronic T ° control: for blower and extrusion - Orientable...

K-SB 40 K-SB 40 is a compact and ergonomic extruder equipped with a power control device and the safety system "motor block" that doesn't allow the machine to start before it reaches the right temperature. The extruder has an innovative universal feeding system that makes possible to use the machine with different diameters of wire. - Rod 0 4 - 5 mm; 5/32" - 3/16" - Backlight display - Two high-brightness LEDs for welding area - Power regulator; security system "motor block" - Independent blower - Thermoregulator double electronic T ° control: for blower and extrusion - Orientable handle -...

R-SB 50 R - SB 50 is a powerful extruder indispensable for jobs that require a high output of extruded material. R-SB 50 is suitable for joining linings and geo-textiles, sheets, thick pipes and for all those welds that are required to resist to continuous stress. During the welding phase the extruder is very smooth and handy. Like the other models, R - SB 50 is equipped with the safety system that allows the operator to work only after the right temperature has been reached; display for temperature setting and spot light LEDs to illuminate the welding area. It is capable of up to 5 Kg/h of...

Possibilities of welding seams Available welding shoes SPECIAL SUPPORT SHOES 45° 900 RELATED SERVICES RITMO offers turnkey solutions to its customers: welding rods and rod dispensers are available Welding rods: HDPE 0 4 - 5 mm; 5/32" - 3/16" PP 0 3 - 4 mm; 1/8" - 5/32"

PLASTIC FABRICATION SHEET WELDING MAIN APPLICATIONS • Mining technology • Building industry • Mechanical engineering • Livestock breeding • Aquaculture and swimming pools • Chemical engineering and tank building • Surface treatment metals • Buffer tanks • Beverage and food industry • Pump manufacturing • Ventilation system and ventilator manufacture • Environment and waste water tanks • Nautical sector

POLYFUSION 1-25 POLYFUSION 1-25 is compact and easy to use manual welders for HDPE and PP sheets from one meters wide and 2 mm to 25 mm thickness (1/8" 4 1"). The welding cycle is handled by a control panel which commands the hydraulic gearcase. The control panel can be adjusted horizontally to assist the operator. The machine can operate in compliance with the D.V.S. 2207. The sheets are fixed to the machine body by manual handwheels; the locking arm has an articulated joint that allows its opening and the easy extraction of the welded sheets. The working surface of the machine body has a...

POLYFUSION 2-25 POLYFUSION 2-50 - COMPACT AND EASY TO USE - MAX WORKING WIDTH: 2 M - MIN THICKNESS 3 mm - SHEETS: HDPE, PP, TWIN WALL SHEETS - MANUAL WELDERS - TYPE OF WELDING: STRAIGHT BUTT FUSION, 90°, CIRCULAR POLYFUSION 2-25 and POLYFUSION 2-50 are compact and easy to use manual welders for HDPE and PP sheets from two meters wide and 3÷25 mm or 1/8”÷1” thickness (mod. POLYFUSION 2-25); and 3÷50 mm or 1/8”÷2” thickness (mod. POLYFUSION 2-50). The machines can also weld twin-wall sheets. The machine can operate in compliance with the D.V.S. 2207. The welding cycle is handled by a control...

Manual Control Panel TECHNICAL FEATURES www.ritmo.it Model

POLYFUSION 2-100 - HYDRAULIC ARM - MAX WORKING WIDTH: 2 M - THICKNESS 3 ÷ 100 mm (1/8” ÷ 4”) - SHEETS: HDPE, PP, TWIN WALL SHEETS Manual control panel - MANUAL WELDERS - TYPE OF WELDING: STRAIGHT BUTT FUSION, 90°, CIRCULAR POLYFUSION 2-100 is compact and easy to use manual welders for HDPE and PP sheets from two meters wide and 3 mm to 100 mm thickness. The welding cycle is handled by a control panel which commands the hydraulic gearcase. The control panel can be adjusted horizontally to assist the operator. The machine can operate in compliance with the D.V.S. 2207. The sheets are fixed to...

www.ritmo.it Materials

POLYFUSION 3-30 POLYFUSION 3-30 is CNC automatic butt fusion machines, suitable for welding thermoplastic sheets made of HDPE, PP, PVC*. The butt fusion machine is also able to weld twin-wall HDPE and PP sheets. The machine can operate in compliance with the D.V.S. 2207. POLYFUSION 3-30 is an hydraulic welding machine equipped with a control panel, which allows easily and safely setting and performance of the whole welding process. According to the user’s needs, it is also possible to input the type of material and the dimension of the thermoplastic sheet, and therefore proceed to weld. The...

TECHNICAL FEATURES Materials * Contact RITMO * * The welding dimensions refer to PP / HDPE with welding pressure of 0.17 N / mm2