102488-Text-8:Combined Catalog-5, Rev 8/10 9/24/10 10:51 AM Page 28 Self-Adjusting Live Centers Standard and Tracer Point n Accuracy guaranteed to ± .0001. n Bellville washers for automatic compensation for thermal expansion n Selectable axial clamping pressure range: light, medium or heavy. n Four-point support for high axial and radial loads. n Double labyrinth seal protects bearings from coolants and contaminants. n Imported from Switzerland. Serviced and repaired in the U.S. by Riten. n Replaces Sandvik, Madison and SFJ live centers Pressure Indicator Color coded rings visually indicate one of three ranges of axial clamping pressure: light, medium or heavy. Push the point back into the housing to select the corresponding color band, as follows: Low pressure for light workpieces and/or low stock removal Medium pressure for medium workpieces and/or medium stock removal High pressure for heavy workpieces and/or heavy stock removal A C C A D TRACER POINT - MORSE TAPER STANDARD POINT - MORSE TAPER Model Taper A B C D Max. Axial Max W. P. Load RPM Weight B D B Model Taper A 15/32 B C D Max. Axial Max W. P. Load RPM Weight 121/32 21/4 129/32 1150 4000 1300 21/4 129/32 1150 4000 1600 17513 3 4 13/8 121/32 23/4 213/32 2150 3000 2600 17514 4 9/16 23/4 213/32 2150 3000 2100 5 131/32 29/32 325/32 33/16 3000 2000 4300 17515 5 19/32 315/32 325/32 33/16 3000 2000 3100 17516 6 7/8 415/16 51/32 43/32 5600 1000 5300 17503 3 17504 17505 17506 6 31/32 17/32 23/4 31/8 51/32 43/32 5600 1000 7600 23/8 28 www.riten.com