Swing Barrier A lightweight, cost effective personnel barrier that provides easy pedestrian access wherever needed. Separation means protection in your plant Your plant can be a dangerous place. When it comes to protection, a yellow line painted on the floor just doesn't cut it. The GuardRite Safe-T-Gate Swing Barrier is used to create an access point into work areas or other parts of a facility that need to be separated and protected. The gate can be used independently or combined with other guardrail to create protected walkways. Modular design » Two steel post columns 43" (1100 mm) high x 5" (130 mm) diameter » Two 7" (180 mm) high x 3" (75 mm) wide PVC rails » Safety gates are available for openings from 3'0" (915 mm) to 5'0" (1525 mm) » All hardware is included for complete installation » Safe-T-Gate Swing can be combined with GuardRite Flex to create a pedestrian walkway » Designed to stop up to 1,000 lbs. (455 kg) Manual operation » Integral spring loaded V-Cam hinge is designed to swing 90 degrees in either direction RlTE’HfTE ALWAYS LOOKING AHEAD

Company Name Address City State Representative Salesperson Yellow extruded PVC rail with UV inhibitor 21” [535 mm] » Steel reinforced pivot with bronze bushings Black steel post columns Part Number Clear Opening Width 8900 North Arbon Drive Milwaukee, WI 53223, USA Rite-Hite®, GuardRite® and Safe-T-Gate™ are trademarks of Rite-Hite Holding Corporation. Rite-Hite products are covered by one or more U.S. patents with other U.S. and foreign patents pending. The information herein is provided as a general reference only regarding the use of the applicable products. The spe