Features » Exclusive Saf-T-Latch prevents workers from raising the gate from inside the work zone, helping prevent an employee from falling from the mezzanine while working the load » Unique link bar design ensures that both gates work in unison » Toeboard prevents material from accidentally being pushed from an elevated space to a lower level » Steel side frames provide built-in track protection » Available in manual and automatic designs » 3" (75 mm) track and nylon rollers provide for smooth operation GateKeeper® Mezzanine Safety GateEnsure full time safety at the edge of a mezzanine. Mezzanine and Elevated Platform Barriers As companies look to maximize existing space within their facilities, many are turning to mezzanines, elevated work platforms, or multi-level racking systems to create additional storage space or work areas for employees. These multi-level work environments allow companies to expand usable floor space above existing operations. In many cases, expanding “up" is less costly and time-consuming than expanding “out," which usually means adding onto existing space, leasing new space or constructing a new facility. Meets applicable OSHA, ANSI and IBC standards » OSHA standard 1910 Subpart D requires that employers must provide fall protection for personnel on walking-working surfaces. This includes any surface higher than 4' (1200 mm) above the ground floor » The ANSI 2009 standard section 6.4.3 published by the Storage Equipment Manufacturers Associations reads “any gate that provides an access opening through the guards for the purpose of loading and unloading material onto a work platform shall be designed such that the elevated surface is protected by guards at all times. Gates that swing open, slide open, or lift out leaving an unprotected opening in the guarding are not acceptable" ALWAYS LOOKING AHEAD

GateKeeper with Operator Date Company Name State Zip Code Representative Salesperson CLEAR OPENING WIDTH » 10 Gauge Steel Frame Powder Coat Yellow S ingle Pallet Width: 5’6” (1675 mm} » 4” (100 mm) Wide x 8.375” (215 mm) Deep Vertical Frames Double Pallet Width: 8’6” (2590 mm} Other Pallet Width: » 6” (150 mm) Formed Front & Side Headers Acceptable Clear Opening Width: 4’0” to 8’6” (1220 to 2590 mm} » Front Rails Heights of 21” (535 mm) and 42” (1065 mm) per OSHA 1910.23(e)(2) » 1.75” (45 mm) OD Steel Pipe for opening widths up to 9’1” (2770 mm) » 1.66” (42 mm) OD Aluminum Pipe for opening widths...