Eliminator” Soft-Sided Dock Shelter Eliminator shelters can take hits from off-center trailers without suffering expensive damage, and allow full, unobstructed access to loads on trailer. Available PitMaster™ seal Gaps large and small beneath and around the dock leveler are sealed with optional PitMaster components, providing substantial energy savings, improving cleanliness and sanitation. Impactable side frames Take repeated hits from off-center trailers without damage or the need for expensive steel bumpers. Poly-wrapped foam side frames give unit stability, yet can be fully compressed — immediately returning to original shape and position if impacted. a Slim-profile side frames 11'2" (3404 mm) overall footprint allows shelter to fit in tight clearance situations. Saves cost of moving lights, signs, conduit, etc. Pivoting canopy header Protects unit from damage if trailer comes in off-center and higher than expected. Integral gutter diverts water off sides of unit. ^ Detachable side curtains Easily removed for maintenance flexibility or to allow increased air flow on the dock. Reattach in minutes.

Eliminator™ Shelter (610E) Ultimate impactability. Rite-Hite’s exclusive poly-wrapped foam side frames provide ultimate impactability – remaining undamaged even after repeated hits by off-center trailers. Side frames can be fully compressed and return to their original shape and position, time after time. Ultimate flexibility. Narrow 6"-wide (152 mm) side frames allow shelter to fit into narrow spaces, even at high projections. This can eliminate the need for expensive repositioning of lights, signs and electrical conduit. 11'2" (3404 mm) shelter footprint stays the same, regardless of projection....