D730 LED Remote Display

Product catalog summary

Overview: The D730 LED Remote Display is designed for industrial applications, particularly for weigh bridges and truck scales. It features super bright LEDs with a wide viewing angle, making it suitable for both indoor and outdoor use. The display is compatible with Rinstrum indicators and supports isolated RS232/485 serial input.

Key Features:

Super bright 7-segment LED display with 75mm (3") high digits.
Traffic lights with 35mm (1.4") red and green indicators controlled via communication protocol.
Auto-detecting setup and 10-step auto-adjusting brightness.
Compatible with Rinstrum indicators and systems supporting Rinstrum/Range A and C and PC Modes.
Greater than 20m (66 feet) visibility at a 120-degree viewing angle.

Specifications:

Display: Six digits with super bright LEDs, 28 LEDs per digit.
Digit Height: 75mm (3").
Visibility: 20m (66 feet).
Power: 110-240VAC 50/60Hz, 23W max; optional 24VDC (18–36VDC), 9W max.
Operating Environment: Temperature range from –20 to +60°C (-4°F to 140°F), humidity <90% non-condensing.
Interfaces: RS232 – RS485 receive, optional Ethernet communications.
Approvals: FCC, CE, C-tick.
Environment Rating: IP65.
Dimensions: 480x150x80 mm (19x6x3.2 inches).

Applications: Ideal for truck or axle scales applications, especially when paired with R400 Series indicators (R420 ABS or R423 Stainless Steel) using K404 firmware for truck scales or K405 firmware for axle scales.

Additional Information: The display includes features such as motion, center of zero, and net annunciators, as well as unit switching with LED indication (lb/kg). It also offers a weather hood with VESA and RAM compatible mounting points.

Catalog excerpts

D730 LED Remote Display - Data Sheet Highly reliable super bright LED's High Digits Auto Detecting setup Super Bright LEDs Wide viewing angle Traffic lights Auto detecting setup Compatible with Rinstrum The D730 is a 7 segment super bright LED remote with 75mm (3") high digits and traffic lights. It is an ideal economical display for weigh bridges and truck scales. The D730 is suitable for industrial applications both indoors and out, and features: • Isolated RS232/RS485 serial input; • Protocol compatible with Rinstrum indicators and systems that support • Greater than 20m /66 feet at 120 degrees viewing angle • 10 step auto adjusting brightness Traffic Lights: 35mm/1.4" red and green traffic lights that can be driven via the communications protocol. Decimal Point: The decimal point is displayed between digits as a single LED and does not affect number of digits displayed. ^ Ideal for Truck or Axle Scales Applications Team the D730 remote display up with an R400 Series indicator • K404 firmware for Truck Scales • K405 firmware for Axle Scales

Open the catalog to page 1

Super Bright LED’s Display 28 LED’s per digit 7 Segment Numeric characters Alpha numeric characters Six (6) digits + Annunciators Digit Height Traffic Lights Dedicated Red/Green Display Stop/Go Message Dedicated Red/Green Unit Switching Motion, Centre of Zero, Net Viewing Angle Display Units (either right or left hand side) Brightness Control Steps 1-10; Automatically to ambient lighting Temperature: –20 to +60°C case temperature (-4 ° to 140 ° F F) Operating Environment Humidity:<90%rh non-condensing Setup Auto detecting to compatible indicators Full non-volatile operation RS232 – RS485 receive...

Open the catalog to page 2

D730 LED Remote Display

D730 LED Remote Display

Catalog excerpts

All Rinstrum catalogs and technical brochures