*mydirectindustry

Catalogs
RINGSPANN
Trantorque OE

Trantorque OE

Product catalog summary

Overview: The document provides technical specifications and guidelines for Cone Clamping Elements Trantorque OE, designed for small shaft diameters with excellent concentricity. These elements are used for backlash-free mounting of components like belt pulleys, allowing simultaneous transmission of torque and axial force.

Specifications:

Shaft diameters range from 17 mm to 35 mm.
Transmissible torque ranges from 211 Nm to 658 Nm.
Average surface roughness at contact surfaces: Rz = 10 to 25 µm.
Material requirements include an E-module of ≥ 170 kN/mm².

Installation and Tolerances:

Installation instructions are available upon request.
Tolerances for shaft diameter and hub bore are ± 0.08 mm.

Transmissible Torques and Axial Forces: The document includes a table listing the maximum transmissible torque or axial force, tightening torque of the clamping nut, contact pressure, and weight for various sizes. For example, for a shaft diameter of 32 mm, the transmissible torque is 601 Nm, and the article number is 4202-032110-000000.

Ordering Example: To order a Cone Clamping Element Trantorque OE for a shaft diameter of 32 mm, specify size 32 x 50 with the article number 4202-032110-000000.

Catalog excerpts

Cone Clamping Elements Trantorque OE - metric for small shaft diameters excellent concentricity Features • Forsmallshaftdiametersbetween 17mmand35mm • Transmissibletorqueof211 Nmupto 658Nm • Excellentconcentricityandtransmissionof bendingmoments • Radialflatheight Application example Backlashfreemountingofabeltpulleywitha ConeClampingElementTrantorqueOE. Transmissible torques and axial forces Thetransmissibletorquesoraxialforceslistedon thefollowingpagearesubjecttothefollowing tolerances,surfacecharacteristicsandmaterialrequirements.Pleasecontactusinthecaseofdeviations. Tolerances • forshaftdiameterd±0,08mm • forhubboreD±0,08mm Simultaneous transmission of torque and axial force Surfaces Average surface roughness at the contact surfacesbetweentheshaftandthehubbore: Rz =10…25µm. Materials Thefollowingapplytotheshaftandthehub: • E-module≥170kN/mm2 The transmissible torques M which are shown inthetablesapplyforaxialforcesF=0kNand conversely,theindicatedaxialforcesFapplyto torquesM=0Nm.Iftorqueandaxialforceareto betransmittedsimultaneously,thetransmissible torque and the transmissible axial force are reduced.Pleaserefertothetechnicalpointson pages72and73. Please request our installation and operating in

Open the catalog to page 1

Cone Clamping Elements Trantorque OE - metric for small shaft diameters excellent concentricity TechnicalData Tightening Contact pressureat torqueof clampingnut Shaft Hub MS PW PN Nm N/mm2 N/mm2 Articlenumber Weight

Open the catalog to page 2

Trantorque OE

Trantorque OE

Catalog excerpts

All RINGSPANN catalogs and technical brochures

Archived catalogs