Power Transmission Edition 2019/2020 RINGSPANN® Registered Trademark of RINGSPANN GmbH, Bad Homburg

* The braking torques relate to the standard brake discs shown in this catalogue. Higher braking torques are possible by the use of several brake calipers or larger brake disc diameters.

* The braking torques relate to the standard brake discs shown in this catalogue. Higher braking torques are possible by the use of several brake calipers or larger brake disc diameters. Issue 03/2019 • Technical details subject to change without notice.

No Drives without Disc Brakes For a long time now Disc Brakes have been tried and tested in the aviation and automotive industry, and increasing awareness of operational safety and ever stricter rules on accident prevention have made them indispensable. After all, wherever there is acceleration, there must also be braking. A reliable and economic solution to these problems are RINGSPANN Disc Brakes. Advantages of RINGSPANN Disc Brakes The following features make the RINGSPANN Disc Brakes unique: • The well thought-out design of RINGSPANN Disc Brakes permits a simple and spacesaving arrangement,...

Amusement rides Assembly stations Belt conveyors Construction machines Cranes Drive units Elevators and escalators Extruder, machines for rubber and plastics Fans and ventilators Foundry machines Machines for food industry Packaging machines Paper machines Printing machines Ship drives Shredders Steel mills Stranding lines Test benches Textile machines Wind turbines Wire and tube machines

Wind turbines

Notes / sketches

spring activated - pneumatically released Code Features Brake Caliper at right angles to the brake disc Frame size 010 010 accommodate friction block wear Designs 010 or 012 010 central position Thickness of brake disc 12,5 mm 12 The braking torques shown in the table are based on a theoretical friction coefficient of 0,4.

spring activated - pneumatically released Features Code The braking torques shown in the table are based on a theoretical friction coefficient of 0,4. Values in brackets resulting with maximum friction block wear.

spring activated - pneumatically released Code Features Brake Caliper Example for ordering Brake Caliper DH 020 FPM, thruster 020, position of the thruster can be to the right or left, thickness of brake disc 12,5 mm: Technical Data The braking torques shown in the table are based on a theoretical friction coefficient of 0,4. Values in brackets resulting with maximum friction block wear.

spring activated - pneumatically releasedFeatures CodeBrake Caliper D 2- Mounting to the machine at right angles to the brake disc Technical Data The braking torques shown in the table are based on a theoretical friction coefficient of 0,4.

spring activated - pneumatically released Compressed air connection: G1/4“ 153 Thickness of brake disc W mm Values in brackets resulting with maximum friction block wear.

spring activated - pneumatically released Mounting to the machine at right angles to the brake disc Technical Data The braking torques shown in the table are based on a theoretical friction coefficient of 0,4.

Brake Caliper DH 025 FPAspring activated - pneumatically released Thickness of brake disc W mm Values in brackets resulting with maximum friction block wear. 15-1

spring activated - pneumatically releasedFeatures CodeBrake Caliper D lAM Mounting to the machine parallel to the brake disc Technical Data The braking torques shown in the table are based on a theoretical friction coefficient of 0,4.

Brake Caliper DV 030 FPM spring activated – pneumatically released Thruster mounted right Thruster mounted left* * Thruster 025, 035 and 045 Thickness of brake disc W mm 12,5 25 Values in brackets resulting with maximum friction block wear.

spring activated - pneumatically releasedFeatures Code Brake Caliper Mounting to the machine at right angles to the brake disc The braking torques shown in the table are based on a theoretical friction coefficient of 0,4

spring activated - pneumatically released Thruster mounted right Tlnustei 025 Compressed air connection: G1 /4" 107 Thickness of brake disc W mm Values in brackets resulting with maximum friction block wear.

spring activated - pneumatically releasedFeatures CodeBrake Caliper D lAM Technical Data The braking torques shown in the table are based on a theoretical friction coefficient of 0,4.

Thruster mounted right Values in brackets resulting with maximum friction block wear.

spring activated - pneumatically releasedFeatures Code Brake Caliper Mounting to the machine at right angles to the brake disc The braking torques shown in the table are based on a theoretical friction coefficient of 0,4.

spring activated - pneumatically released Compressed air connection: G1/4“ Thickness of brake disc W mm Values in brackets resulting with maximum friction block wear.

spring activated - pneumatically released 24-1 Technical Data Features Code Mounting to the machine parallel to the brake disc Spring activated Manual adjustment to accommodate friction block wear Thruster mounted right available R Thickness of brake disc 12,5 mm, 25 mm, 30 mm or 40 mm Example for ordering Brake Caliper DV 035 FPM, thruster 111, thruster mounted right, thickness of brake disc 12,5 mm: The braking torques shown in the table are based on a theoretical friction coefficient of 0,4.

Thruster mounted right Thickness of brake disc W mm Values in brackets resulting with maximum friction block wear.

spring activated - pneumatically released !6- Technical Data Features Code Mounting to the machine at right angles to the brake disc Spring activated Manual adjustment to accommodate friction block wear Thruster mounted right or left available Thickness of brake disc 12,5 mm, 25 mm, 30 mm or 40 mm Example for ordering Brake Caliper DH 035 FPM, thruster 111, thruster mounted right, thickness of brake disc 12,5 mm: The braking torques shown in the table are based on a theoretical friction coefficient of 0,4.