Catalogs >
RINGSPANN >
FBL series

FBL series
2Pages

Catalog excerpts

Application as ► Overrunning Clutch Features Complete Freewheels FBL with RINGSPANN shaft coupling are sealed sprag freewheels with ball bearings for coupling two shafts. They are supplied oil-filled and ready for installation In addition to the standard type, two other types are available for extended service life. Nominal torques up to 8 000 Nm. Bores up to 140 mm. Many standard bores are available. The torsionally stiff RINGSPANN-Shaft Coupling can accept large radial and angular misalignments, without reactive forces affecting neighbouring bearings. We can provide you with performance data upon request. Application example Complete Freewheel FBL 82 SFZ as an overrunning clutch in the drive unit of a conveyor belt system with additional creep drive. The freewheel with shaft coupling is arranged in between the main motor and the creep drive. When the creep drive operates, the freewheel is in driving operation and drives the belt at low speed. In normal operation (freewheeling operation), the main motor drives and the outer ring overruns, whereupon the creep drive is automatically disengaged. With the high speed here, the type sprag lift-off Z is used; the sprags work in freewheeling operation without contact and hence are wear-free.

Open the catalog to page 1

49-1 Mounting The flexible disk of the shaft coupling must be axially free when fitted so that the ball bearings in the freewheel are not distorted due to heat expansion. The shaft coupling including the fastening screws are supplied loose. Depending on the desired freewheeling direction, the shaft coupling can be fitted on the right or the left of the freewheel. Example for ordering Freewheel size FBL 72, type with sprag lift-off Z and 40 mm bore in the freewheel and 50 mm bore in the shaft coupling: • FBL 72 LZ, d1 = 40mm, d3 = 50mm Standard type For universal use For bore d1: Keyway...

Open the catalog to page 2