*mydirectindustry

Catalogs
RINGSPANN
Datasheet DS 370 FEM

Datasheet DS 370 FEM

Product catalog summary

Specifications:
The document provides technical specifications for the Brake Caliper DS 370 FEM, which is spring activated and electrohydraulically released. It includes details on brake disc diameters ranging from 500 mm to 1250 mm, with corresponding braking torques and clamping forces. The braking torques are based on a theoretical friction coefficient of 0.4. The nominal power, oil volume, voltage, and weight are also specified for different thruster models (455, 456, 457).

Procedures:
The document outlines the manual adjustment procedure to accommodate friction block wear. It also provides an example for ordering the brake caliper with specific configurations, such as thruster type and mounting position.

Norms and Standards:
The brake caliper is designed with features such as an external adjustable brake spring, optional internal throttle valve, and hand release lever. It adheres to specific design standards for mounting and operational efficiency.

Recommendations:
Options for customization include micro-switch wear control, status control, residual piston stroke warning, and various thruster designs (heat resistant, corrosion protected, etc.). The document recommends considering these options based on operational requirements.

Key Data from Tables:
The tables provide detailed measurements for brake disc diameters, braking torques, and dimensions for different thruster models. Key data includes:

Brake disc diameters: 500 mm to 1250 mm
Braking torque range: 950 Nm to 50,000 Nm
Nominal power: 370 W to 680 W
Oil volume: 4.5 l to 11 l
Voltage: 230/400 V
Weight: 241 kg to 267 kg

Catalog excerpts

Figure shows similar product with full equipment Technical Data Features Code Disc Brake Spring activated Manual adjustment to accommodate friction block wear Thruster mounted right or left available Thickness of brake disc 30 mm 30 Brake Caliper DS 370 FEM, thruster 456, thruster mounted right, thickness of brake disc 30 mm: The braking torques shown in the table are based on a theoretical friction coefficient of 0,4.

Open the catalog to page 1

Drawing shows the thruster mounted on the right hand side of the brake Options • Micro-switch wear control • Micro-switch status control • Micro-switch residual piston stroke warning • Hand release lever • Hand release lever with padlock • Thruster with internal throttle valve • Thruster in heat resistant design • Corrosion protected design • Friction lining of sintered metal Pneumatic cylinder instead of thruster Thruster also available in other voltages and frequencies

Open the catalog to page 2

Datasheet DS 370 FEM

Datasheet DS 370 FEM

Catalog excerpts

All RINGSPANN catalogs and technical brochures

Archived catalogs